2022 KOMATSU WA270-8

2022

KOMATSU

WA270-8

2,800

Used

Accurate / Verified

Very Good Komatsu Tool Carrier - Excellent Value! EPA IS PRESENT  PARALLEL LIFT TOOL CARRIER! 3 YARD BUCKET AUX HYDRAULICS HYDRAULIC COUPLER RIDE CONTROL Very good paint Very Good Michelin Radials ~ 65% Very good glass Very Good Tinware Operator station in very good condition  Telematics on board Fork set with 60" tines SPECIFICATIONS Axles and Final Drives Drive system    Four-wheel drive Front    Fixed, semi-floating Rear    Center-pin support, semi-floating, 24° total oscillation Reduction gear    Spiral bevel gear Differential gear    Torque proportioning Final reduction gear    Planetary gear, single reduction Brakes Service brakes    Hydraulically actuated, wet disc brakes actuate on four wheels Parking brake    Wet, multi-disc brake on transfer output shaft Secondary brake    Parking brake is commonly used Engine Model    Komatsu SAA6D107E-3* Type    Water-cooled, 4-cycle Aspiration    Variable geometry turbo-charged, after-cooled, cooled EGR Number of cylinders    6 Bore x stroke    4.21 x 4.88 in Piston displacement    408 in³ Governor    All-speed, electronic Horsepower: Gross - SAE J1995    153 HP Net - ISO 9249/SAE J1349    149 HP Rated rpm    2,000 rpm Max power - ISO 14396 @ 1,650 rpm    149 HP Fan drive method for radiator cooling    Hydraulic Fuel system    Direct injection Lubrication system: Method    Gear pump, force-lubrication Filter    Full-flow type Air cleaner    Dry type with double elements and dust evacuator, plus dust indicator *EPA Tier 4 Final emissions certified Hydraulic System Steering system: Hydraulic pump    Piston pump, in common with loader control Capacity (at rated rpm)    39.6 US gpm Relief valve setting    3,000 psi Hydraulic cylinders: Type    Double-acting, piston type Number of cylinders    2 Bore x stroke    2.76 x 17.8 in Loader control: Hydraulic pump    Piston pump, in common with steering system Capacity (at rated rpm)    39.6 US gpm Relief valve setting    4,554 psi Hydraulic cylinders: Type    Double-acting, piston type Number of cylinders:    bore x stroke: Lift cylinder / 2    4.3 x 28.2 in Bucket cylinder / 1    5.5 x 18.9 in Control valve    2-spool type Control positions: Boom    Raise, hold, lower, and float Bucket    Tilt-back, hold, and dump Hydraulic cycle time (rated load in bucket): Raise    6.0 s Dump    2.0 s Lower (empty)    3.2 s Service Refill Capacities Cooling system    8.8 US gal Fuel tank    49.1 US gal Engine    6.1 US gal Hydraulic system    21.1 US gal Axle front    4.9 US gal Axle rear    4.8 US gal Transfer case    1.8 US gal DEF tank    3.7 US gal Steering System Type    Articulated type, fully-hydraulic power steering Steering angle    38° each direction (40° to max end stop) Minimum turning radius at  the center of outside tire    17 ft. 0 in Transmission Transmission: Hydrostatic, 1 pump, 2 motors with speed range select Travel Speed:    Forward    Reverse 1st    0.6 - 8.1 mph    0.6 - 8.1 mph 2nd     8.1 mph 8.1 mph 3rd    11.8 mph    11.8 mph 4th    23.6 mph    23.6 mph Measured with 20.5-R25 tires

Yes

2

Yes

Yes

Yes

Yes

Yes

Yes

Radial

65

65

Yes

Yes

Yes

Enclosed

Joystick

Yes

Excellent

Yes

Yes

Yes

USA Tier 4 Final

Yes