1994 CATERPILLAR 816B Used 垃圾填埋压实机1994 CATERPILLAR 816B Used 垃圾填埋压实机
    1994 CATERPILLAR 816B Used 垃圾填埋压实机1994 CATERPILLAR 816B Used 垃圾填埋压实机
    1994 CATERPILLAR 816B Used 垃圾填埋压实机1994 CATERPILLAR 816B Used 垃圾填埋压实机
    1994 CATERPILLAR 816B Used 垃圾填埋压实机1994 CATERPILLAR 816B Used 垃圾填埋压实机
    照片(4)

    1994 CATERPILLAR 816B

    垃圾填埋压实机
    致电询价 

    MARCEL EQUIPMENT LIMITED

    联系人:John Stewart

    London, Ontario, 加拿大 N6N 1B8

    常规

    年限
    1994
    制造商
    CATERPILLAR
    型号
    816B
    小时
    13,450
    状况
    二手
    库存号
    C4540
    描述
    CAT 3306 Engine, Engine Block Heater, Powershift Transmission, Cab with A/C, Caron Double - U Landfill Blade, Compaction Wheel Options, Front & Rear Striker Bars, Lights, Wipers, Heater, Service/Repair History Available, Rated at 210 HP, Weight 46,000 LBS. Repair/Condition Report: Unit had been CAT maintained since 10,986 hours At 11,548 hours, CAT dealer REBUILT the rear axle with NEW crown & pinion & NEW bearings in differential & final drives At 12,015 hours, torque, transmission and transfer case were replaced with used/reconditioned components At 12,015 hours, exhaust manifold was replaced with NEW At 12,444 hours, front axle had a complete rebearing and reseal and NEW front driveshaft installed At 13,100 hours, Marcel Equipment completed the following: Upon arrival to our yard, all guards & covers were removed & machine was power washed Completed visual & operational inspections Changed engine oil & filter Filter was cut open & checked for contaminates - clean Changed transmission oil & filter, filter checked - clean Checked suction screens - good Changed hydraulic oil & filter, filter checked - clean Both differential oil levels good & oils clean All 4 wheel planetary levels good & oils clean Checked rear axle oscillation - good Checked center articulation - good Installed NEW pins & bearings in steering cylinders Checked all brake lines Installed NEW fan belts Installed NEW a/c compressor belt Installed NEW condenser assembly Installed NEW rear diff seal Installed NEW engine mounts Installed NEW output seals on transfer case Installed NEW block heater Installed NEW thermostats Inspected & greased all u-joints on driveshaft Checked all gauges, controls, lights & heater Load tested batteries & checked all connections Checked all grease lines & greased machine Performed performance tests on engine Checked torque convertor stall speed Checked all transmission pressures Checked all hydraulic pressures Unit was sand blasted, primed, painted & new decals applied.

    类别特定

    Operating Weight
    20,865.25 千克

    发动机

    马力
    156.6 kW