2017 SDP EZ HAULER 55MLP

2017

SDP

EZ HAULER 55MLP

二手

2017 SDP EZ Hauler 55MLP s/n 101958881763 Only 128 hours Features 5500 lb. lifting capacity with overload protection 3000 lb. carrying capacity 25 HP diesel engine 42 ft. sheave height Insulated to 46 KV category C Full continuous rotation and unlimited work zone Auger stored on side of boom Hydraulic Pole Guide Hydraulic adjustment of track drive Positive +80º boom elevation to -10º boom elevation Fully proportional remote control Stable to 20º side slope Pressure and flow adjustable hydraulic tool circuit Remote Drive Bucket (44 ft. working height) Hydraulic tools Custom-built transporter trailer Transformer/ Jib Winch General Specifications Engine: Yanmar Mnimax, 3 Cylinder, Water cooled 1640 cc Diesel 25 HP @ 3600 RPM. Fully tier IV compliant Hydraulic Pump: Fixed displacement gear type, 14 gallons (53 liters) per minute Hydraulic track drive with skid steering Hydraulically extended tracks 41 ft.(12.5 M) boom to tip height Full 360 degree continuous rotation 5500 lb. (1725 kg) lifting capacity Fully proportional remote for crane and drive functions Meets or Exceeds ANSI A92.2-2001, A10.31-2006, and SAE Requirement Meets 46kv category C dielectric qualifcations Dimensions Length — Overall, length, including crane, is 17ft. (5.2M). Chassis length is 10′ – 6″(3.2M). Length with outriggers fully extended is 13′ – 6″(4.1M) Width — Overall, width of the tracks extended is 51″ (132cm). Width without the tracks extended is 35.5″ (90cm). Width with the outriggers fully extended is 11ft (3.35M). Height — Overall, height, including crane, is 6′ – 10″ (2.1M). Chassis height is 47″ (103cm). Height with the outriggers fully extended is 62″ (124.44cm). Other Features Pin on bucket with 300 lb. (135kg) capacity – 44 ft. (13.4M) working height Crawler tracks – Rubber 12′ (30 cm) wide, five idler wheels on each side. Crawler Drive Motors – Integrated orbit hydraulic motor with single stage planetary drive gear. Transport Bed – 47″L x 35.5″W (124cm L x 90cm W), Capacity: 3000 lbs. (1135kg) Controls: Wireless Radio Remote Main Boom: 80 degree about to -10 degree below horizontal hydraulic boom elevation Extensions: Three hydraulically operated steel sections and one manually extended fiberglass section with hydraulic pole guide. Winch line, equipped with 9/16″ 100ft. (12m) polyester ropes. Auger: stored on side of boom with latching mechanism for transport Auger Drive: Sealed planetary gear reduction – 3500 ft. /lbs. (3745 N-M) torque. (5000 ft./lbs. optional) Auger Bit: 18″ (46 cm) diameter standard with 2″ hex output shaft. (2.5″ optional) Extremely clean machine inside & out. Click on the videos to watch it run & operate and for a walk-around tour. Give us a call with any additional questions at all. We would be happy to help with a shipping quote.

2,494.76 千克