CNY ¥1263,635
CNY ¥1263,635 + GST = CNY ¥1389,998 (商业税 applies to buyers in 澳大利亚)
常规
年限
2023
制造商
MARINI
型号
MR-C 20
序列号
062323
状况
新建
库存号
09
描述
Marini MR-C 20 - Complete Micro drilling Rig
Technical Specifications
• Track carriage
- Track with variable width: 1.050 - 1.550 mm
- Track wheelbase: 1.371 mm
- Pad width: 250 mm
- Max. speed: 2.0 Km/h
- Max climbing ability: 80 %
- N.2 frontal hydraulic stabilizers
- N.2 rear hydraulic stabilizers
• Chassis
It is made with welded steel sections completed with boom fixing bracket
• Hydraulic power pack YANMAR 3TNV86CT-DKEV Tier 4 final - 44 Hp (33 Kw) complete of exhaust after treatment with DPF
- Electric circuit 24V with converter
- Hydraulic filter on pressure and return line
- Hydraulic oil tank capacity: 100 liter
- Air/oil cooler / Heat exchanger with electric motor
- Hydraulic oil temperature and level indicator on tank
- Diesel tank capacity: 40 liter
- Diesel level indicator
• Articulations
- Mast independent tilting function -45° / + 30° by hydraulic cylinder
- Mast rotation +/- 95° by hydraulic turn table
- Counter slide with hydraulic cylinder stroke 600 mm
- Main pump with variable displacement axial piston pump (Load Sensing system) for all positioning functions of the rig including head rotation and feed
- Undercarriage rotation (250°) with n.1 turn table with negative brake and check valve , It is made in steel and is operated by two hydraulic moto reduce provided with negative brake and motion control valve.
- Mast independent tilting function -45° / + 30° by hydraulic cylinder
- Mast rotation +/- 95° by hydraulic turn table
- Counter slide with hydraulic cylinder stroke 600 mm
• Mast with hydraulic gear reducer feed system
- Mast mod. CID 250 made with a rectangular steel frame with reinforced side rails for feed trolley movement and torque support. The mast is completed with a single roller chain, a double speed gear redactor with a tractive force of 3500 daN and energy chain.
A - Mast mod. CID 250 with stroke 1.300 mm
B - Mast extension 500 mm for total stroke 1.800 mm
• Rotary head / Drifter carriage for mast CID 250
- Made of welded steel plates completed with 4 rollers and lateral nylon guides
- Hydraulic side shift for head / drifter lateral movement
• Hydraulic distributors system
- Proportional hydraulic distributors VALVOIL with pressure and flow settings for each valve section (max. operating pressure 250 bar)
• Controls and Electronic
- On board computer for engine management system
- PLC control with drill rig program for monitoring and safety
- Remote control (ISO 13849-1) for tracks, positioning and drilling functions with proportional joystick - transmission frequency 2.4 GHz
• Basic safety devices
- Check valves on all hydraulic cylinders
- Emergency stop buttons on drill rig and remote control
- Warning labels on the machine
- Emergency rope / switch on the mast
- Identification plate without CE marking
• Painting
- Base primer with rust protection
- Top coat with lucid finisher
- Machine base: GREY RAL 7010 - Details: ORANGE RAL 2011
• Rotary head / Drifter mounting plate
- Mounting plate for rotary head MARINI mod. ID 500
• Rotary head MARINI mod. ID 500
- Gear box with double hydraulic motor, series/parallel hydraulic switch complete with - 250 cc motor (2 Gears) max. torque 500 daNm - Max speed 80 rpm
• Hydraulic clamp / clamp and breaker mod. 230
- Hydraulic clamp for rods diam. 70 - 230 mm
- Hydraulic clamp and breaker for rods diam. 70 - 230 mm
- Rod guide with interchangeable bushings base 230
- Interchangeable bushings for 230 rod guide (diam. DTH 5")
• Hydraulic winch
- Max. traction: 500 daN
- Cable length: 20 mt
- Cable section: 6 mm
• Air lubricator
• Water / Foam pump Max. flow: 15 lpm
- Max. Pressure: 100 bar
• Fast assembling - disassembling kit for helicopter transport
- Fast couplers on hydraulic hoses
- Steel frames for mast and powerpack easy installation
- Water / Foam pump powered by an hydraulic motor to use with clean water and light polymers
- Hydraulic winch with self braking system mod. 500 complete with steel cable, derrick and control valve
- Centralized air lubricator 1"1/
APPROX. WEIGHT (Depending on accessories): 2.800 - 3.400 kg
Contact Mike TerraQUIP Drilling equipment