2018 KOMATSU WA380-6 Used 轮式装载机2018 KOMATSU WA380-6 Used 轮式装载机
    2018 KOMATSU WA380-6 Used 轮式装载机2018 KOMATSU WA380-6 Used 轮式装载机
    2018 KOMATSU WA380-6 Used 轮式装载机2018 KOMATSU WA380-6 Used 轮式装载机
    2018 KOMATSU WA380-6 Used 轮式装载机2018 KOMATSU WA380-6 Used 轮式装载机
    2018 KOMATSU WA380-6 Used 轮式装载机2018 KOMATSU WA380-6 Used 轮式装载机
    2018 KOMATSU WA380-6 Used 轮式装载机2018 KOMATSU WA380-6 Used 轮式装载机
    照片(6)

    2018 KOMATSU WA380-6

    轮式装载机
    CNY ¥151,882 
    输入的价格为: USD $21,000

    Machinery Trader Group Co., Ltd

    联系人:Amy Kong

    Shanghai, 中国 201406

    常规

    年限
    2018
    制造商
    KOMATSU
    型号
    WA380-6
    小时
    3,108
    状况
    二手
    库存号
    AMY 308
    小时表
    准确/验证
    描述
    Machine operating weight (kg): 16620 Rated load (kg): 5000 Rated bucket capacity (m3): 3.3 Unloading height - unloading angle is 45° (mm): 4095 Unloading distance - unloading angle is 45° (mm): 1170 Digging force (digging force) (kN): 168 Engine model: Komatsu SAA6D107E-1 Rated power (Kw/rpm): 142/2100 Displacement (L): 6.69 Cylinder diameter × stroke (mm×mm): 107×124 Cooling method Water cooling Working mode: Water-cooled four-stroke turbocharged direct injection, intercooler, electronic speed control Fuel tank (L): 300 Hydraulic tank (L): 139 Engine oil (L): 23 Coolant (L): 30.5 Driving speed 1st gear (forward/reverse) (km/h): 7.1/7.4 Driving speed 2nd gear (forward/reverse) (km/h): 11.4/11.8 Driving speed 3rd gear (forward/reverse) (km/h): 20.2/21 Driving speed 4th gear (forward/reverse) (km/h): 31.5/32.5 Drive axle swing angle (°): 80 Steering angle: 40 Turning radius - outside of bucket (mm): 40 Minimum turning radius of the centerline of the outer wheel: 7220 Hydraulic system Hydraulic pump type: plunger pump Flow (at rated speed) (l/min): 205.5 Rated working pressure (bars): 31.4Mpa Boom cylinder bore × stroke (mm × mm): 130 × 713 Bucket cylinder bore × stroke (mm × mm): 150 × 535 Lifting (s): 5.9 Unloading (s): 1.8 Lowering (empty bucket) (s): 3.3 Three items and (s): 11 Material transport position height (mm): 4095 Machine length (mm): 7715 Machine width (mm): 2780 Machine height (mm): 3395 Machine maximum length (mm): 7765 Machine maximum total height (mm): 5195 Minimum ground clearance (mm): 455 Bucket width (mm): 2760 Wheelbase (mm): 3300

    附件

    Bucket
    Bucket Width
    300 厘米
    Bucket Capacity
    3 m3

    类别特定

    Operating Weight
    16,620 千克
    容量
    4,535.92 千克

    机壳

    轮胎类型
    Radial

    Exterior

    驾驶室
    封闭式
    挡泥板

    内视

    Operator Controls
    Joystick
    空调
    A/C Condition
    Excellent
    Heater

    动力总成

    马力
    168 kW
    驱动
    4 轮驱动

    发动机

    Engine Tier
    USA Tier 3

    船运尺寸

    运输长度
    770 厘米
    运输宽度
    280 厘米
    运输高度
    340 厘米
    运输重量
    16,620 千克