2022 MASABA 10X16

    岩石骨料输送机/给料机/堆垛机
    致电询价 

    ICM Solutions

    联系人:Cameron Rutherig

    Salt Lake City, Utah, 美国 84120

    常规

    年限
    2022
    制造商
    MASABA
    型号
    10X16
    序列号
    2022223
    状况
    二手
    库存号
    NC000815
    描述
    2022 Masaba PORTABLE 10’ X 16’ HOPPER WITH FEEDER & DISCHARGE CONVEYOR –HPF1016-4248 10’ x 16’ Hopper & Chassis • Tandem Axle Chassis – constructed of Heavy Duty wide flange beam • Heavy Duty 25,000lb Leaf Spring Suspension - with (8) 11R x 22.5 radial tires • Brake Package – air brakes, emergency valve, and plumbing • Light Package – brake and directional signals • Mud Flaps • Landing Jacks – (2) manual crank down landing jacks • Hydraulic Lifting Jacks – See Options • Lift Hooks – at kingpin end of plant • Cord Holder • 14 Cu. Yd. Hopper – Tapered self-relieving hopper design. 10’ wide x 16’ long, constructed of ¼” steel plate with baffle and adjustable canoe liners, lined with weld-in 3/8” AR400 • Adjustable Metering Gate – for adjusting material flow, with chain • Reversible Grizzly - See Options • Grizzly Bars – See Options • (2) Hopper Side Curtains – (1) rubber curtain on each side, removable without removing any bolts • (2) Hinged Bulkheads – (1) swing down steel guard to protect undercarriage each side 42” x 20’ Belt Feeder • Conveyor Frame – 10” Channel • Drive – Class II, Head V-belt drive with guard • Gear Reducer – Dodge TA #7 with sheave & bushings • Motor – WEG 40hp electric with sheave & bushings • Belt Speed – 100 FPM • Capacity – Up to 1050 TPH based on 100# per cu/ft of material • Drive Pulley – PPI, 18” diameter, rubber lagged drum pulley • Drive Shaft & Bearings – 4 7/16” shaft with Dodge Type E bearings • Tail Pulley – PPI, 16” diameter, self-cleaning wing pulley • Tail Shaft & Bearings – 3 7/16” shaft with Dodge SCM bearings • Snub Pulley – PPI, 12” diameter self-cleaning wing pulley • Snub Shaft & Bearings – 2 7/16” shaft with Dodge SCM bearings • Take Ups – screw type • Belting – 3-ply, 330 PIW, 1/4" x 1/16” conveyor belt • Belt Splice – Mechanical steel fasteners • Belt Scraper – Flexco EZP1 • Live Shaft Idlers – PPI, CEMA C, 5” diameter, rubber disc, live shaft impact idlers, 9” spacing • Live Shaft Idler Bearings – 1 15/16” Dodge VSC bearings, (2) per idler • Return Idlers – PPI, CEMA C, 5” diameter return idlers • Inverted Trough Idler – PPI, CEMA C, 5” diameter troughing idler, mounted on return side 48” x 48’ Discharge Conveyor • Conveyor Frame –12” channel • Drive – Class II Head V-belt drive with guard • Gear Reducer – TAII #6 with sheave and bushings, and backstop • Motor – WEG 40hp electric with sheave and bushings • Belt Speed – 350 FPM @ 18 Degrees • Capacity – Up to 1500 TPH based on 100# per cu/ft of material • Drive Pulley – PPI, 20” diameter, rubber lagged drum pulley • Drive Shaft & Bearings – 4 7/16” shaft with Dodge Type E bearings • Tail Pulley – PPI, 16” diameter, self-cleaning wing pulley • Tail Shaft & Bearings – 3 7/16” shaft with Dodge SCM bearings • Take Ups – screw type • Belting – 3-ply, 330 PIW, 1/4" x 1/16” conveyor belt • Belt Splice – Mechanical steel fasteners • Belt Scraper – See Options • Impact Idlers – PPI, CEMA C, 20 degree, 5” diameter rubber impact idlers, in loading area • Troughing Idlers – PPI, CEMA C, 35 degree sealed 5” diameter trough idlers, 4’ spacing • Return Idlers – PPI, CEMA C, 5” diameter return idlers, 10’ spacing • Hopper – 6’ long with adjustable rubber flashing • Adjustable Height Support – manual raise/lower with manual pin lock • Guards – Tail pulley guards, v-belt guards, and return roll guards Options Included • (4) Masaba Lift Only Jacks – (Power Unit Not Included) • 13hp Electric Start Gas Powered Unit - pump, reservoir with filter, valve body, and plumbing. • Manual Reversible Dump Grizzly - Static Grizzly Bars – 3/4" x 4” bar stock capped with 3/4" x 3” bar stock, 6” spacing • Self-Relieving Grizzly Bars with Optional 6” or 8” Openings – Grizzly consists of alternate static and self-relieving grizzly bars, (2) sets of bars, (1) set with a 2” cap for 8” grizzly openings and (1) set with a 6” wide cap for 6” grizzly openings • Hydraulic Lift Grizzly & Hydraulic Package - Hydraulically raise/lower grizzly top,15hp electric motor, pump, reservoir, valve body, plumbing, and remote, and electric/manual valve • Vulcanized Belts – on each Feeder belt and Discharge belt • Belt Scraper – Flexco EZP1 Belt scrapers, (1) on 48” Discharge Conveyor • Hydraulic Raise Discharge Conveyor – Hydraulically raise and lower the conveyor (Power Unit Not Included) • Switchgear – NEMA 4 enclosure with line reactor, branch breaker, and lockout for (2) 40hp motors, and a 15hp motor, main breaker with a handle, control transformer, 24dc power supply, timers for automatic open/close function, illuminated e- stop, stop/illuminated starts, +/- speed buttons, man/auto switch for open/close, hour meter and keypad mounted in the door • 100’ Lead Cord • Variable Frequency Drive – Variable Feeder belt Speed • Remote Control – remote and relays for start-stop of feeder and hydraulic pump and +/- speed control of drive. Located in our Salt Lake City, UT yard