CNY ¥7663,635
常规
年限
2023
制造商
FAB TEC INC
型号
6X20
序列号
PT-6-20-3-587-23
状况
新建
库存号
E00067306
描述
FABTEC PORTABLE 6' X 20' 3-DECK SUPERIOR GUARDIAN TWIN SCREENING PLANT WITH OVERHEAD FEED CONVEYOR, 5-PACK EQUIPPED PER THE BELOW:
(2) 6' X 20' - 3 DECK SUPERIOR GUARDIAN SCREENS:
- 40 HP 1200 RPM TEFC SCREEN MOTOR.
- HUCK BOLTED SCREEN BOX.
- ADJUSTABLE OVAL STROKE ANGLE, STROKE LENGTH AND SPEED.
- SELF-ALIGNING SPHERICAL BEARINGS.
- SPLASH TYPE LUBRICATION SYSTEM.
- COIL SPRINGS
- (1) LH AND (1) RH DRIVE
- BOTH SCREENS 2.5 DEGREES
- BOTH SCREENS END TENSIONED BOTTOM DECKS
- 5' CLAMP BARS
(1) INDIVIDUAL 48" X 13'6” CROSS CONVEYOR ON 1ST DECK, (4) 30" X 13'6” CROSS
CONVEYORS FOR 2ND AND 3RD DECKS, 7.5 HP (RIGHT ANGLE DRIVE):
- VULCANIZED LAGGED HEAD PULLEYS, SELF-CLEANING WING TAIL PULLEYS.
- DODGE SCM BEARINGS.
- 7.5HP SEW RIGHT ANGLE DRIVES.
- 24" SPACING ON CEMA B4 CHANNEL INSET 20 DEGREE IDLERS FOR 30"
CONVEYORS.
- TOP CROSS CONVEYOR BUILT WITH CANOE LINERS FLASHING ~VS~ STANDARD FLASHING.
- (6) EXTRA C5-20CIT-48SB CEMA C5 RUBBER IMPACT IDLERS FOR 48" TOP CONVEYOR.
- FULL LENGTH FORMED SKIRT BOARDS.
- MOUNTED ON SLIDER FRAMES WITH HOLD-DOWNS AND CAN BE REVERSED.
- 3-PLY ¼ COVER BELT FOR 30" CONVEYORS, AND 3 PLY ¼ COVER BELT FOR 48" TOP
CONVEYOR.
- ALL WITH VULCANIZED SPLICES
- ORANGE GUM RUBBER FLASHING ON LOWER (4) CROSS CONVEYORS
- STD FABTEC COMBI WIPERS
CROSS CONVEYOR CONFIGURATION - NEW FROM FACTORY SET UP
- TOP OUT THE PASSENGER SIDE
- MIDDLE TWO OUT THE PASSENGER SIDE
- BOTTOM TWO OUT THE DRIVERS SIDE
(2) 60" UNDER SCREEN CONVEYORS, RUN OPPOSITE OR RUN TOGETHER:
- 15 HP SEW RIGHT ANGLE DRIVES, DODGE SCM BEARINGS, 2-15/16 SHAFTS.
- 3-PLY BELT 1/4" COVER, VULCANIZED SPLICES.
- 32" SPACING ON CEMA C IDLERS.
- UNDER SCREEN HOPPERS WITH WEAR STRIPS AND ADJUSTABLE SKIRT BOARD
WIPERS.
- VULCANIZED LAGGED HEAD PULLEYS AND SELF-CLEANING WING TAIL
PULLEYS.
- FULL LENGTH FORMED SKIRT BOARDS.
- ORANGE GUM RUBBER FLASHING
- 60" NAVIGATOR ROLLERS ON (2) UNDERSCREEN BELTS.
- 60" SUPERIOR X-TERRA BELT SCRAPER - QTY (3) ON UNDERSCREEN CONVEYORS
36" X 46' OVER HEAD FEED CONVEYOR, 15 HP TEFC:
- SEW RIGHT ANGLE SHAFT MOUNT REDUCER.
- DODGE SCM BEARINGS AND TYPE E BEARING ON HEAD END.
- 3-PLY BELT, 1/4" COVER; CEMA C CHANNEL INSET IDLERS.
- VULCANIZED LAGGED HEAD PULLEY & WING TAIL PULLEY.
- FORMED SKIRT BOARD FULL LENGTH.
- HYDRAULIC RAISE AND LOWER OF FEED CONVEYOR.
- LIGHTER, MANUALLY REMOVED 2 PIECE STYLE SPLITTER BOX WITH EXTENSIONS
- CANOE LINER SKIRTING IN FEED HOPPER OF OVERHEAD
- V-PLOW ON RETURN SIDE
- ELEVATED 20" FOLD DOWN WALKWAYS WITH DIAMOND PLATE FLOOR BOTH SIDES OF SCREENS
AND BACK PLATFORMS, 42" TUBE STEEL HANDRAILS, AND ACCESS LADDERS.
WALKWAYS RAISED 18” ON EACH SIDE OF SCREENS:
- BACK PLATFORM WILL REMAIN AT NORMAL LOWER POSITION.
- TOE BOARD ON BOTH SIDES OF WALKWAYS.
- REQUIRES ADDITIONAL SUPPORTS & BRACKETS.
- INCLUDES STEPS BETWEEN WALKWAYS AND REAR PLATFORM.
- EXTRA LOWER PLATFORMS AT SCREEN GEAR BOX FOR SCREEN MAINTENANCE.
- ADDITIONAL BELT GUARDING FOR FEED CONVEYOR. (PVC CURTAIN MOUNTED ON CONVEYOR)
- WALKWAYS FOLD FOR SHIPPING.
- 1/4" PLATE UNDER SCREEN HOPPER WITH WEAR STRIPS & ADJUSTABLE SKIRT BOARD
WIPERS.
- AR LINED PRODUCT DISCHARGE CHUTES TO DISCHARGE ONTO PRODUCT CROSS CONVEYORS
- 1/3 - 2/3 -PANEL STYLE BLENDING FOR 2ND TO 3RD DECK.
4 AXLE CARRIER DROP CENTER STYLE (TANDEM / TANDEM):
- 24" WF 68# BEAMS.
- RIDE-WELL AIR RIDE SUSPENSION:
- 25,000 # AXLES. MAX AIR BAG STOPS.
- AIR BRAKES, BRAKE LIGHTS, MARKER LIGHTS, REFLECTIVE TAPE, AND MUD
FLAPS.
- LED AND STROBE LIGHTS.
- GROUND SUPPORT STANDS.
- FRONT TOW HOOKS
- TRAIL KING 9FT BOOSTER CONNECTION POINT WITH AIR AND ELECTRICAL (NO BOOSTER)
- SAFETY GUARDS, SANDBLASTED CHASSIS, RUST INHIBITOR PRIMER, AND TWO FINISH
COATS OF PAINT INCLUDED: PAINTED RAL 7024 GRAPHITE GRAY.
OPTIONS INCLUDED:
FABTEC 70K 6 LEG RUN-ON SYSTEM KIT:
- 12V HYDRAULIC PACKAGE AND SPOOL VALVE~ NUMBER OF BANKS TO MATCH LEG QUANTITY.
- 18" STROKE CYLINDERS 70,000 LB. CAPACITY (AT 2500 PSI) WITH SAFETY-LOK
CIRCUIT.
- HEAVY DUTY FOOT PADS.
(2) - FAB TEC 48K RUN-ON LEG KIT WITH SWIVEL MOUNTS ON FRONT OF CHASSIS:
- 5 X 24" CYLINDERS 48,000 LB CAPACITY (AT 2500 PSI) WITH SAFETY-LOK CIRCUIT.
- 24” STROKE.
- SWIVEL MOUNTING PLATE.
- CYLINDER MOUNTING HARDWARE.
- HEAVY DUTY FOOT PADS.
- HYDRAULIC CYLINDER FOR SWIVEL UP AND DOWN OF LEG.
- WORKS WITH 70K RUN ON LEG KIT.
SELF CONTAINED HONDA 8 HP HYD. POWER PACKAGE ~VS~ HPX 200 12V:
- ELECTRIC START.
- 12 GALLON HYDRAULIC RESERVOIR WITH FILTER PROTECTION.
- 2 1/2 GPM PUMP.
- (2) TOOL BOX MOUNTED ON CHASSIS.
- SLIDE IN REJECT CONVEYOR CAPABILITY OVER AXLE SCREEN.
- RUBBER DISC RETURNS ON ALL CONVEYORS ~VS~ STEEL CANS.
- REMOTE GREASE LINES FOR UNDER SCREENS TAIL PULLEY BEARINGS
SAFETY TIE-OFF CABLES -STAND ALONE- BOTH SIDES OF BOTH SCREENS
AES ELECTRICAL SWITCHGEAR FOR TWIN 6203-32 SCREENING PLANT:
- MAIN IN 60X48 HOFFMAN ENCLOSURE
- ABB FVNR NEMA RATED STARTERS WITH CIRCUIT BREAKERS
- (1) 40 HP FVNR FOR SCREEN 1
- (1) 40 HP FVNR FOR SCREEN 2
- (2) 15 HP FVNR FOR UNDER SCREEN 2, OH FEED CONVEYOR
- (1) 15 HP FVR (REVERSING) FOR UNDERSCREEN 1
- (4) SPARE 60 AMP FEED BREAKERS WITH 60 AMP HUBBELL RECEPTACLES
- (1) SPARE 100 AMP FEED BREAKER WITH 100 AMP HUBBELL RECEPTACLE
- (1) 5 HP SIZE #1 FOR SIRC WITH 20 AMP HUBBELL RECEPTACLE
- (5) 7.5 HP FVR (REVERSING) FOR 5 CROSS CONVEYORS
- CPT TRANSFORMER: BASIC
- PANEL SETS ON GROUND FOR OPERATION – TRAVELS OVER KINGPIN END FOR WEIGHT
DISTRIBUTION
- 150FT REMOTE PENDANT WITH FWD/REV SWITCHES, HOUR METER IN DOOR, D-
SHELL(PHOENIX PIN CONNECTOR ONE END)
- SAFETY START HORN - E-STOP IN PENDANT AND IN DOOR OF PANEL
- (150 FT)3/0W SINGLE CONDUCTOR POWER CORD, 150' 4/0W FOR GROUND
- PANEL SETS ON GROUND FOR OPERATION - MOTOR CORD COME OFF PLANT IN SINGLE
LOCATION, ALLOW 30FT TO MOVE PANEL AWAY FROM PLANT
- CORD CAGE AND LEG KIT: D-RING LIFTERS
GUARDING - WE DO NOT WARRANT THAT MANUFACTURERS’ GUARDING WILL MEET ALL LOCAL CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE GUARDING CHECKED BY A LOCAL INSPECTOR, PRIOR TO STARTUP OF EQUIPMENT OPERATIONS, CORRECTIVE ACTIONS AND ASSOCIATED EXPENSE ARE THE RESPONSIBILITY OF THE END USER.