CNY ¥129,016
常规
年限
2021
制造商
VERMEER
小时
162.2
型号
SC30TX
序列号
1VRC070NHM1004251
状况
二手
库存号
4251AU
描述
SC30TX STUMP CUTTER
The modified operator presence handle design is now manufactured with a harder exterior to improve wear and appearance. This user-friendly handle system provides additional capacitance sensing capability and is intended to help protect the operator.
Drivetrain
System Relief Pressure 2900 psi (200 bar)
Track Width Extended 35 " (88.9 cm)
Track Width Retracted 35 " (88.9 cm)
High Speed Travel 3.2 mph (5.1 km/h)
Ground Bearing Pressure Soft Ground 3.4 psi (23.4 kPa)
Track Length On Ground 31.4 " (79.7 cm)
Type Of Idler Cast
Number Of Idlers 5
Track Drive Pump Type Hydrostatic
Pump Flow At Maximum Rpm 11.4 gpm (43.1 L/min)
Track Brake Type Hydrostatic
Track Type Rubber 7 " (17.8 cm) width
Track Drive Motor Type Geroter
Operational
System Relief Pressure 2750 psi (189.6 bar)
Chip Containment 2.2 cu ft (.1 cu m)
Flow Control Autosweep (option)
Cutterwheel Cut Below Ground 12 in (30.5 cm)
Tank Capacity 9 gal (34.1 L)
Cutterwheel Cut Above Ground 25 in (63.5 cm)
Cutterwheel Straight Line Dimension 35.5 in (90.2 cm)
Control Station Description Fixed-rear
Reversible Pockets Yes
Directional Control Standard
Cutterwheel Guard Yes
Number Of Pockets 16
Tooth Description Yellow Jacket Cutter System
Oil Cooler Yes. Fan-cooled
Number Of Teeth 16
System Type Open loop
Number Of Indexes 2
Cutterwheel Diameter Without Teeth 16 in (40.6 cm)
Cutterwheel Thickness .5 in (1.3 cm)
Cutterwheel Speed 1110 rpm
Lower Gearbox Hydraulic motor
Pump Flow At Maximum Rpm 16 gpm (60.6 L/min)
Recommended Oil Type ISO 68
Filtration Method Inline return filter
Electrical
Battery 405
Controller Yes
System Voltage 12
Standard Gauges Hour meter/tach
Switches Cutter wheel drive
Dimensions
Length 94 in (238.8 cm)
Width 35 in (88.9 cm)
Height 49 in (124.5 cm)
Weight Engine Option One 1550 lbs (703.1 kg)
类别特定
Operator Type
Walk Behind
切割深度
30.48 厘米
切割宽度
1.27 厘米
切割高度
63.5 厘米
船运尺寸
运输宽度
88.9 厘米
运输长度
238.76 厘米
运输高度
124.46 厘米
运输重量
1,550 千克