2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机
    2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机
    2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机
    2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机
    2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机
    2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机
    2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机2024 SUPERIOR F36X500ZL New 岩石骨料输送机/给料机/堆垛机
    照片(7)

    2024 SUPERIOR F36X500ZL

    岩石骨料输送机/给料机/堆垛机
    致电询价 

    Belt Tech Industrial

    联系人:Owen Capehart

    Washington, Indiana, 美国 47501

    常规

    年限
    2024
    制造商
    SUPERIOR
    型号
    F36X500ZL
    序列号
    2423572
    状况
    新建
    库存号
    2423572
    描述
    INSTOCK!!! Washington, IN 47501 Superior 36" X 500' Zipline® Conveyor Conveyor Frame Head Section- 40' long, Fastened to concrete, head shaft is approximately 8' above grade; broken down for shipping Tail Section- 10' long, Fastened to concrete, fully assembled with tail pulley, 5' gathering trough Frame Style- Stick Built Intermediates- 4" structural channel, 10' long, supported on 2' high "H" supports Drive Specifications Drive- Class I head drive Gear Reducer- Shaft Mount Backstop- installed in reducer Motor- 75 HP TEFC V-Belt Drive- with drive guard Capacity- 1000 STPH of 100 PCF material, 25° surcharge (90% fines, 10% spherical lumps, 6" minus) Maximum Lift and Length- "10' lift at 1000' long, 42' lift at 400' long 30' lift at 250' long" Belt Speed- 400 fpm Drive Pulley- 24" diameter, 3/8" herringbone lagged drum Tail Pulley- 18" diameter, CEMA Chevron® wing Snub Pulley- 18" diameter flat faced drum with 1/4" smooth lagged drum Bend Pulleys- 18" diameter flat faced drum with 1/4" smooth lagged drum Weight Pulley- 18" diameter flat faced drum with 1/4" smooth lagged drum Shafts- Turned and Polished Bearings- Included Gravity Take-up- Take-up weight by owner Screw Take-up- 6' long Conveyor Components Belting- 3-ply 3/16 x 1/16 330PIW Belt Splice- Flexco mechanical steel fasteners, installed by others Scrapers- Superior Exterra® Primary Belt Scraper Return Cleaner- Superior V-Plow UHMW Blade prior to tail pulley Idlers- CEMA C, Project Idlers, 5" dia., sealed for life ball bearings Idler Seal- Superior Standard SpinGuard® Seal Load Area- 20° trough, 12-16" spacing Trough- 35° steel rolls on 4' spacing Trough Aligners- Self Aligning Trough Idlers 100' Apart Returns- steel cans on 10' spacing Return Aligners- Superior Navigator® Return Idlers 100' Apart Return Guards- Nip guards included Receiving Hopper- sloped, 5' long, bolt on design Receiving Hopper Liner- not included Gathering Trough- 5' long with adjustable rubber flashing Discharge Hood- not included Emergency Stop -not included Conveyor Covers- not included Additional Specifications Guarding- For drive and tail pulleys, v-belt drive and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected Voltage- 480 V / 3 PH / 60 Hz - 1800RPM Control Panel Plate- not included Control Panel- control panel and wiring not included Head & Tail Paint- 1 coat primer, 1 coat finish enamel (*available colors below) Intermediate Finish- Powder coated (*available colors below) Guard Paint Idler Paint- Powder coated Superior Orange Owner's Manual- (1) copy in English