2024 LIUGONG 9027FZTS New 小型挖掘机2024 LIUGONG 9027FZTS New 小型挖掘机
    2024 LIUGONG 9027FZTS New 小型挖掘机2024 LIUGONG 9027FZTS New 小型挖掘机
    2024 LIUGONG 9027FZTS New 小型挖掘机2024 LIUGONG 9027FZTS New 小型挖掘机
    2024 LIUGONG 9027FZTS New 小型挖掘机2024 LIUGONG 9027FZTS New 小型挖掘机
    2024 LIUGONG 9027FZTS New 小型挖掘机2024 LIUGONG 9027FZTS New 小型挖掘机
    照片(5)

    2024 LIUGONG 9027FZTS

    小型挖掘机
    CNY ¥233,558 
    输入的价格为: USD $32,000

    Shaker Equipment Sales

    联系人:Daniel Smith

    Auburn, Kentucky, 美国 42206

    访问我们的网站 (Opens in a new tab)

    常规

    年限
    2024
    制造商
    LIUGONG
    型号
    9027FZTS
    小时
    6
    状况
    新建
    小时表
    准确/验证
    描述
    New with Quick Attach, Hydraulic Thumb. 3 Year / 4000 hour Full Warranty , 5 Year / 7000 hour Powertrain and Hydraulic Warranty ENGINE Emissions rating EPA Tier 4 Final - Stage V Make Yanmar Model 3TNV80F Aspiration Natural Cooling fan drive Direct Displacement 77.3 in³ (1.267 L) Output power 20.4 hp (15.2 kW) @ 2,500 rpm Peak torque 49.6 lb·ft (67.3 N·m) 1,800 rpm Cylinders 3 Bore × Stroke 3.1 in x 3.3 in (80 mm × 84 mm) HYDRAULIC SYSTEM Main Pump Type Load-sensing variable piston pump Maximum flow 22.8 gal/min (86.4 L/min) Relief Valve Setting Implement 3,133 psi (21.6 MPa) Travel circuit 3,133 psi (21.6 MPa) Slew circuit 2,698 psi (18.6 MPa) Pilot circuit 566 psi (3.9 MPa) Hydraulic Cylinders Boom Cylinder Bore × Stroke 2.7 in x 20.1 in (70 mm x 510 mm) Arm Cylinder Bore × Stroke 2.7 in x 19 in (70 mm x 482 mm) Bucket Cylinder Bore × Stroke 2.5 in x 15 in (65 mm x 382 mm) SERVICE CAPACITIES Fuel tank 7.1 gal (27 L) Engine oil 1.2 gal (4.4 L) Cooling system 1.3 gal (5 L) Hydraulic reservoir 6.9 gal (26 L) UNDERCARRIAGE Rubber track assembly 12 in (300 mm) Bottom rollers each side 3 Top rollers each side 1 SWING SYSTEM Planetary gear reduction driven by high torque axial piston motor, with oil disk brake. Swing parking brake resets within five seconds after swing pilot controls return to neutral. Swing speed 9.5 rpm Swing torque 3,395 lbf·ft (4,600 N·m) DRIVE & BRAKES 2-speed axial piston motors with oil disk brakes. Steering controlled by two detachable hand levers with pedals. Travel speed High: 2.8 mph (4.5 km/h) Low: 1.7 mph (2.7 km/h) Gradeability 30° / 58% Max. drawbar pull 5,530 lb·ft (24.6 kN) ELECTRIC SYSTEM System voltage 12 V Battery 12 V (one) Alternator 12 V - 40 A Starter motor 12 V - 1.9 hp (12 V - 1.4 kW) SOUND PERFORMANCE Interior sound level (ISO 6396) 79 dB(A) Exterior sound level (ISO 6395) 93 dB(A) WORKING RANGES Description Standard Cab Standard Canopy Boom 6 ft 10 in (2.08 m) Arm 4 ft 3 in (1.3 m) A Max. digging reach 15 ft 7 in (4,757 mm) B Max. digging reach at ground level 15 ft 3 in (4,648 mm) C Max. digging depth 9 ft 4 in (2,857 mm) D Min. front swing radius 6 ft 5 in (1,965 mm) E Max. vertical wall digging depth 7 ft 7 in (2,312 mm) F Max. digging height 14 ft 4 in (4,365 mm) G Max. dumping height 10 ft 1 in (3,067 mm) Max. digging depth 2.5m (8 ft 2 in) level bottom 7 ft 10 in (2,386 mm) Dozer up 1 ft 2 in (350 mm) Dozer down 1 ft 4 in (400 mm) Bucket digging force (ISO) 4,496 lbf (20 kN) Arm digging force (ISO) 2,698 lbf (12 kN) Bucket capacity 0.065 yd3 (0.05 m3) Bucket tip radius 2 ft 2 in (662 mm) DIMENSIONS Standard Cab Standard Canopy Boom 6 ft 10 in (2.08 m) Arm 4 ft 3 in (1.3 m) A Shipping length 13 ft 8 in (4,160 mm) B Max. shipping height to top of cab/canopy 8 ft 1 in (2,450 mm) C Track gauge 4 ft 1 in (1,250 mm) D Undercarriage width 5 ft 1 in (1,550 mm) E Length to center of rollers 5 ft 1 in (1,540 mm) F Track length 6 ft 5 in (1,953 mm) G Track width 12 in (300 mm) H Tail swing radius 2 ft 7 in (775 mm) I Counterweight ground clearance 1 ft 9 in (530 mm) Max boom offset to the right 2 ft 3 in (694 mm) Max boom offset to the left 1 ft 8 in (498 mm) Max boom swing angle to the right 54.5° Max boom swing angle to the left 74°

    类别特定

    Operating Weight
    2,721.55 千克
    Quick Attach
    Thumb
    Thumb Type
    Hydraulic

    Exterior

    ROPS
    开放式

    发动机

    马力
    14.91 kW
    引擎品牌
    Yanmar