CNY ¥1549,631
常规
年限
2021
制造商
RUBBLE MASTER
小时
2,500
型号
MSC8500M-2D
序列号
MSC8500-2D-06-004
状况
二手
描述
SHAKER DECK SCREENER - 3 WAY SPLIT
RUBBLE MASTER - MADE IN IRELAND
SERVICED IN CALIFORNIA. PARTS IN CALIFORNIA.
EXCELLENT CONDITION. RENTAL UNIT SERVICED REGULARLY BY GREENROCK.
3-INCH TOP DECK / 1-INCH BOTTOM DECK. 6 INCH TIPPING GRID.
MORE PRODUCTIVE THAN A POWERSCREEN CHIEFTAIN 2100.
Technical Description RM MSC8500M-2D
Trackmobile incline screen RM MSC8500M-2D
DESCRIPTION
Heavy Duty Mobile Screener with Following Features:
Tracked Mobile
Heavy Duty High Energy 2 Bearing Screen Box
Hydraulic raise and lower of head section feed conveyor
Remote Controlled Tipping grid
Drop down fines conveyor for easier access to screen deck
Fast on site setup Time – 20 Minutes
RUBBLE MASTER HMH GmbH, Im Südpark 196, 4030 Linz/Pichling, Austria Tel. +43/(0)732/737117, Fax +43/(0)732/737117-9
Technical Description RM MSC8500M-2D
Erstellt von: ZUE 2/5 20.02.2019
DIMENSIONS AND WEIGHT
Length – Transport 17700 mm (57’ - 11”)
Length – Working 18800 mm (61’ - 5”)
Width – Transport 3000 mm (9’ - 10”)
Width – Working 17900 mm (58’ - 9”)
Height – Transport 3500 mm (11’ - 2”)
Height – Working 6100 mm (19’ - 9”)
Weight – With tipping grid (Estimated) 30,500 kg (67,252 lbs.)
CAPACITIES
Capacity – 14ft Hopper 9.2m3
(12 yd3
)
Diesel Tank Capacity 320 L (70 US Gal)
Hydraulic Tank Capacity 415 L (92 US Gal)
FEED CONVEYOR
Belt Width 1050 mm (42”)
Belt Spec Plain 500/3 5+1.5
Adjustable Speed 0 – 0,25 m/s
MAIN CONVEYOR
Belt Width 1050 mm (42”)
Belt Spec Plain 500/3 5+1.5
Maximum Speed 2,94 m/s
Capacity:
Max. 400 t/h throughput capacity depending on material and screen
deck
RUBBLE MASTER HMH GmbH, Im Südpark 196, 4030 Linz/Pichling, Austria Tel. +43/(0)732/737117, Fax +43/(0)732/737117-9
Technical Description RM MSC8500M-2D
Erstellt von: ZUE 3/5 20.02.2019
SIDE CONVEYORS
Stockpile Height 5100 mm (16’ - 9”)
Belt Width 800 mm (31.5”)
Belt Spec Chevron – 315/3 3+1.5
Speed (L/H Over Size Convr) 0 to 1,93 m/s
Speed (R/H Over Size Convr) 0 to 2,46 m/s
TAIL CONVEYOR (FINES)
Belt Width 1200 mm (48”)
Belt Spec Plain – 400/3 5+1.5
Stockpile Height 4960 mm (16’ - 2”)
Maximum Speed 1,93 m/s
SCREENBOX
Screens- Top Deck 5’ x 4’ Side Tension (4 pic.) 5’ x 2’ Side Tension (1 pic.)
Screen Dimensions- Top Deck 5485 mm x 1525 mm (18’x 5’)
Screens- Bottom Deck 6’ - 10” x 5’- 2” End Tension (3 pic.)
Screen Dimensions- Bottom Deck 4875 mm x 1525 mm (16‘ x 5’)
Tensioning – Top Deck Bolted
Tensioning – Bottom Deck Curved Tension Bar and Adjusters
Screen Angle 20° to 30°
Drive System Direct Drive with Flexible Coupling
Screen Stroke Adjustable YES 6-10 mm
Screen Shaft Speed 1120 rpm to 930 rpm
RUBBLE MASTER HMH GmbH, Im Südpark 196, 4030 Linz/Pichling, Austria Tel. +43/(0)732/737117, Fax +43/(0)732/737117-9
Technical Description RM MSC8500M-2D
Erstellt von: ZUE 4/5 20.02.2019
POWER UNIT AND HYDRAULICS
Engines CAT C4.4 Tier 3 / Stage 3a. 98kW @ 2200 U/min.
CAT C4.4 Tier 3 / Stage 3aK. 98kW @ 2200 U/min.
Cummins QSL 3.8 L Stage 4/Tier4F, 97 kW@2200
Hydraulic Tank Capacity 415 l (92 US Gal)
Hydraulic Oil Cooler YES with Thermostat Control
Total System Flow 356 l (78 US Gpm)
ELECTRICS
Emergency Stops 4 pic, 2 @ Power unit RH&LH
1 @ Walkway
1 @ Feeder
Start Siren Yes – 10 Second Delay
Engine Shutdowns Low Oil Pressure
High Water Temp
Air Filter Blockage
Fuel Contamination
Low Hydraulic Tank Level
Remote Tipping Grid YES, Timed
Pendant Track control YES, Plugged in at Feeder End with E-Stop
Flashing Beacon & Siren YES, (When Tracked)
RUBBLE MASTER HMH GmbH, Im Südpark 196, 4030 Linz/Pichling, Austria Tel. +43/(0)732/737117, Fax +43/(0)732/737117-9
Technical Description RM MSC8500M-2D
Erstellt von: ZUE 5/5 20.02.2019
TRACKS
Width 500 mm (19.7”)
Length 3800 mm (12’ – 6”)
Height 800 mm (31.5”)
Speed max 0.8 Km/h (0.5 Mph)
Gradeability 24.5°
Max Slope side to side 10°
Attachment to Chassis Bolt On
OPTIONS
Wedge Tensioners on Top Deck
Live Head (Vibrating Grid)
Crusher Chute
Radio Remote Control for Tracks
Dustbuster Air Cleaner
SAFETY FEATURES
External Belt Alignment Points
Engine Safety Shutdown Systems
Full Safety Guarding for Nip Points
CE-Compliance
The manufacturer reserves the right to make technical updates.