致电询价
常规
制造商
IMT
型号
A140 LCA
序列号
UNKNOWN
状况
新建
描述
Brand new IMT A140 - Hydraulic drilling and piling rig - 40 ton class rig
Base machine
TECHNICAL SPECIFICATIONS:
UNDERCARRIAGE
Extendable from min. 2550 mm to max. 3800 mm by means of hydraulic cylinders
c/w 600 mm wide triple grouser track shoes operated by epicyclical reduction
gear boxes driven by hydraulic motors.
- Overall length: 4675 mm
- Traction force: 220 kN
- Travelling speed: 2.2 km/h
UPPER STRUCTURE C/W COUNTERWEIGHT
Mounted on slew ring for 360° rotation, c/w:
- Easily accessible canopies for maintenance and inspection.
- Hydraulic system.
- Soundproofed operator cab.
- Large top, front and side windscreens with protection grills (FOPS compliant);
- Fully adjustable seat.
- Levers and controls within the operator’s easy reach.
- Controls with graphical symbols recalling each operation.
Width: 2550 mm
Tail swing radius: 3650 mm
Slew speed: 3.4 rpm
Counterweight: 4200 kg.
AIR CONDITIONING SYSTEM
POWER MODULE
Diesel engine –
Type Cummins QSB 6.7, rated power: 169 Kw (227 HP) @ 1900 rpm (Tier 3).
Fuel tank capacity: 290 l
HYDRAULIC SYSTEM
Main circuit 2x195 l/min
Aux circuit 78 l/min
Oil tank capacity: 250 l
CUMMINS COMPUTER SYSTEM MONITORING
Cummins computer system
Engine parameters monitoring
Hydraulic pumps pressures monitoring
Temperatures monitoring
Rear view camera
MAIN WINCH C/W DEPTH METER
Controlled-descent type.
Nominal line pulls on 1st layer: 145 kN
Grooved drum for rope diameter 22 mm
Max. line speed on 1st layer: 90 m/min.
Grooved drum c/w guide roller for correct rope winding.
ROPE ASSEMBLY FOR MAIN WINCH DIAMETER 22 MM
SERVICE WINCH
Controlled-descent type.
Nominal line pulls on 1st layer: 60 kN
Rope diameter: 15 mm
Max. line speed on 1st layer: 90 m/min.
ROPE ASSEMBLY FOR SERVICE WINCH DIAMETER 15 MM
CONNECTION B/W MAST AND UPPER STRUCTURE
Allows adjustment of the working radius min. 3155 mm – max. 3650 mm with
the mast in vertical position, c/w hinged support arm, triangular support,
hydraulic cylinders, connecting rod frame and hydraulic hoses.
MAST GROUP C/W INCLINOMETER
Heavy duty, box section mast that permits full torque along its entire length.
ROTARY DRIVE
Suitable for Kelly bar c/w spin-off.
Installed on a slide pad mounted cradle c/w variable displacement hydraulic
motor, fixed displacement spin-off motor and epicyclical reduction gear boxes.
Max. torque: 140 kNm
Min. drilling speed: 7.5 rpm
Max. drilling speed: 25 rpm
Spin-off speed: 112 rpm
HEAVY DUTY ROTARY INNER RACK
Rotary table complete with two hydraulic motors, two heavy duty bearings and six
Locks for improved verticality, increased production and inner drive life.
AUTOMATIC WINCH STOP
Ability to automictically stop the main winch when the auger tool reaches the bottom
of the hole.
Tool tray installed in-front of cabin
Toolbox
MT A140 Low headroom Kit only:
A140 LCA kit with Kelly Bar 5 elements for a maximum depth of 18 meters
Kit contains:
-Multi-lock Kelly bar 5 elements complete with shock absorber and 150x150 stub (on request 130x130 available, but delivery time extends by 2-3 weeks)
-Kelly bar special LHR swivel to increase the distance from the ground to kelly stub
-Electrical harness
-Hydraulic hoses harness
-Tilting cylinders cylinder stroke limiters
-Limit switch bracket
-Short cylinder with foot connection
-Mast adaptor from standard mast to STD Cathead
-Lower Kelly transport ring and chains for safe transport of machine with kelly bar on
Low Head Room Application c/w Cylinder Crowd System and Multi-lock Mechanical Kelly Bar
Kelly Bar 5 elements for a maximum depth of 19 meters.
Max. drilling diam. Along mast: 1500 mm
Max. drilling depth: 18 m
Cylinder stroke 2.5 m
Contact Mike TerraQUIP Drilling equipment
内视
空调
是