致电询价
Cropac Equipment Ltd - Ontario
联系人:Crane Sales
Oakville, Ontario, 加拿大 L6L 6R3
常规
年限
2023
制造商
TADANO MANTIS
型号
GTC 2000
序列号
18127
状况
新建
描述
2023 Tadano GTC2000
base crane: width=3000mm; 47t (40t with optional "Transport optimization - removable extension beams and outriggers
ISO Safety decals (ISO 13200)
Standard ISO decals, applicable in most countries, US Safety decals (ASME with text) possible through Country Code
Control System & Operator aids
Load Moment Indicator
IC-1, with Integrated load moment indicator acc. EN13000; Color display; Displaying of current operating conditions, load charts, fault indicator; Signal lights indicating LMI-load; Crane data logger
Slope angle related load charts
Calculation of lifting capacity subject to Track base (3 symmetrical track width configurations) and ground angle (automatic determination of permissible lifting capacity based on track width setting); Incl. Automatic counterweight detection.
IC-1 Plus (Slewing angle and track width related Capacity Chart)
Calculation of lifting capacity subject to Track base, Slewing angle of superstructure and ground angle; Variable track width possible (infinitely adjustable in unpinned positions incl. non-symmetrical).
IC-1 Remote
Crane is equipped with IC-1 Remote
Track width basis monitoring
Surveillance of each track frame (horizontal position); Warning in case of anomaly in crane cabin
CWT monitoring
Detection of CWT amount and warning message in case the real CWT does not match with the selected configuration
Central Ballast Monitoring
Detection of Central Ballast presence and warning message in case central ballast is not installed
Hook height indication H1
Displaying and programmability of the hook height H1 by IC-1
Working range limiter
Displaying and programmability of the work range limits by IC-1
Anemometer
Disconnectable, to allow use with all extensions
Painting & Optics
Painting TADANO blue/white
Single basecoat, topcoat in TADANO standard, Counterweights all surfaces, Upper crane, Jib in Blue (RAL5002), Central Ballast, Car Body, Crawlers, outriggers in Black (RAL9005); NO chevron warnings in red-white at outriggers, Boom in White (RAL9016).
Access
Lose Multi-purpose ladder
Loose stepladder for misc. assembly work; Incl. transport storage for access to Cabin (when crane is on trailer), HW2, right hand side (tanks, engine), jib, boom tip, CWT, etc Dedicated Storage location on outriggers (during transport) and on crawler frames (on job site)
Integrated ladder in crawler frame
Permanent Ladders (2x) at each crawler frame, inclinable for comfortable access/egress
Walkway/platform on crawlers
Large Platform on crawlers with fixed platform and slidable platform to be connected to car body
Walkway/platform on car body
Large Platform on car body, removable for access to elec control box or hydraulic blocks and components
Antislip central ballast
anti-slip walkable top surface on central ballast
Antislip Counterweight slabs
anti-slip walkable top surface on CWT slabs
Hoist rope reeving ROPE and STICK
light reeving rope for hoist rope reeving, to be attached to hoist rope and guided along the main boom with stick and with ladder at boom tip into sheave; storage place for stick at lose ladder on undercarriage (accessible from ground and always transported with base crane); reeving rope is part of the standard tool set
Handhold Bars for access on CWT
2 Bars on left side and 1 bar on right side; provides 3-point contact access when accessing/agressing to/from CWT (e.g. for H2 installation or winch inspection); includes transport stowage position and securing clips
Maintenance & Lubrication
Automated central Lubrication on upper crane
Centralised lubrication lines, automatic (time-controlled), fur upper crane greasing points only (Slew Ring, Pivot point (Boom), hoist winch
Central Lubrication in Undercarriage
Multiple centralised lubrication lines, to be fed manually (greasing gun): for e.g. extension beams
Oil sealed rollers and idler wheel
easy maintenance oil sealed bearings
Greased sheaves
All sheaves are with greasing points (boom and jib and hook blocks)
Visibility & Communication - Lights & cameras
LIGHT_Cabin Front Light
1x work area (Front) at crane cabin front side
LIGHT_Additional work lights on superstructure cab
3 additional LED work lights on superstructure cabin; 1 work light pointing towards hoist (H1 and H2) and 2 work lights for illumination of front working area; All three work lights are manually adjustable; the lights on the left can also be oriented to the side to illuminate the access to the cabin.
Rotary beacon preparation
1x disconnectable at Superstructure tail; electric preparation only
MIRROR_Side mirror (left side)
Mirror enabling visual observation of the side & rear area of superstructure cab's side (left); mirror holder is clamped to the handrail and can be swung away.
CAMERA_Rear camera
Camera covers the crane's entire rear area behind the counterweight, camera can be positioned either at rear end of superstructure (if H2 is not installed) or at the end of the H2 frame (when H2 is installed)
CAMERA_Blind spot camera
Camera covers the crane's blind spot on the right
CAMERA_Hoist monitoring H1 & H2
Visualisation H1 and H2 by a camera system; Displayed on a dedicated camera display in the cabin; Includes one floodlight pointing at the hoists (H1 and H2).
DISPLAY_display screen in cabin
Display screen for the different cameras enabled for monitoring in the crane cabin.
LIGHT_Double work floodlight at Boom
Two adjustable floodlights, mounted at front of boom base section; electrically adjustable from cabin
LIGHT_Positioning light / flight light
Disconnectable red light, to allow use with all Boom/jib combinations; requires anemometer (offered in standard scope)
Storage & Accessories
Slings & Chain box at central Ballast
Open Storage box integrated into central ballast, for slings, shackles & tools, no slings and chains included!
Tool Set
Toolkit for light repairs and service
Fire extinguisher
Mount on superstructure behind cabin, possibility to choose another fire extinguisher
Holder for Fire extinguisher
Holder only (no fire extinguisher included), mounted on superstructure behind cabin, can hold various types of fire extinguishers
Basic Equipment - Undercarriage
Undercarriage
Complete Undercarriage Self-Assembly ability for Crawlers and central ballast Transport optimised undercarriage height (1000mm ground clearance to adapt to any trailer height) Removable Outriggers (incl. Cylinder), quick couplings and connectors for easy coupling/disconnecting of hyd hoses and electric cables dedicated lift points and clear indication of component weight
Car Body
Car Body
Bottom car body design suitable for any trailer type, incl. Double beam, gooseneck, etc.
Track Extension Beams
Track width
Track width adjustment (adjustable with 3 symmetrical positions) 3500mm, 4750mm, 6000mm (CL-CL) Track adjustment possible on the spot or during travelling (control from cabin or with remote control) integrated protected extension cylinders
Transport Optimised Version: Removable extension beams (41t instead of 47t)
Removable track extension beams (incl. Hyd Cylinder), quick couplings and electric connectors for easy coupling/disconnecting of hyd hoses and elecric cables. dedicated lift points and clear indication of component weight
Crawlers
Crawler Track Components
B9HD components (260mm pitch), excavator type, oil lubricated sealed rollers and idler wheel
Crawler shoes 2-grouser 1000mm
Crawler shoes 2-grouser 1000mm
Crawler Drives
GFT330 gearboxes with 1450kN Traction force with speed sensor Gradeability 50%
Crawler Assembly
Self Assembly with 4x Container lift points accessible from the upper platform. Pinning of crawler frames to Extension Beams is manual. Hydr and Elec quick coupling for quick and reliably assembly/disassembly)
Central Ballast
Central Ballast
2x7,5t steel box type central ballast with: - anti-slip top surface for improved access/egress all around the upper crane - integrated lift points (mushrooms) for efficient and safe handling; lift point are design to create a slight angle for efficient and accurate positioning and centering during installation to car body - Accessible manual pinning to secure central ballast; no lose part, no risk of losing parts - geometry with slope angle to mitigate ground interference whilst travelling on rough terrain - on one central ballast: large rack plate for tool box or other customised storage items - on other central ballast: large robust box, integrated in central ballast structure, for storage of slings, including with self-assembly (open top) - Includes automatic CWT detection/monitoring interacting with Load Moment Indicator (sensor belongs to car body) - Upper CWT is centred on central ballast for automatic reliable CWT rigging (no CWT stacked on ground)
Outriggers
Outriggers
Outrigger legs with 2 positions (Transport in length direction, assembly in outward direction) outrigger cylinders can tumble (with assistance spring allowing low ergonomic human force) to maximise ground clearance in operating mode and ensure compactness on trailer during transport Cylinders with integrated check valves and pressure sensor, allowing auto levelling
Outrigger pads
4 rectangular outrigger steel pads A=0,17m² outrigger pads can remain on cylinders, even in tumbled position (no need to detach and handle pads, no impact on ground clearance) 2x2 handles to allow comfortable handling when pads are removed storage place at the side of the outrigger leg
Basic Equipment - Superstructure
Standard Options:
182-370-12
Display data logger
indication of data logger on crane Display ; Data recorded by datalogger displayed on the display in the crane cabin; possibility to download data with USB-port
189-050-12
Remote control
Control of Rigging and operations via wireless remote control, for all functions incl. Travelling and self assembly
182-420-12
LIGHT_Lights to REAR and RIGHT hand side
Additional job site LED lights attached to camera holder, for surrounding areas, usually goes along with side and rear camera
183-050-22
Aux Hoist H2
2nd Hoist; Spring-loaded multi-disc brake; Resolver (hoist rotation indicator); Incl. quick couplings; Rope twist prevention is not included identical performances, size, rope line pull, speed and length 26mm rope, 1960MPa, Length H1=245m, line pull= 136,6kN, line speed= 139m/min convenient and safe reeving with reeving rope and rope guiding stick includes 26mm rope socket includes load spectrum monitoring: device to record load spectrum of hoists with memory box attached to Hoist winch to allow recording of loads irrespective of the crane the winch is installed on.
183-280-12
Self-rigging H2
Makes it possible to mount H2 without assist crane; With transport frame; H2 is not included; includes cable remote control panel to control the jack-up cylinders
187-330-12
Rope twist prevention H1
Rope twist prevention for rope diameter d=26mm; Avoids rope twist of hoist 1
187-330-22
Rope twist prevention H2
Rope twist prevention for rope diameter d=26mm; Avoids rope twist of hoist 2
183-200-12
Emergency lowering system HY
Hydraulic interface on crane in accordance with BG (German employers’ liability insurance association requirements) in case of engine failure; Makes it possible luffing, hoisting and slewing (no movements which increases the load moment); Emergency lowering System transformer not included; Optional emergency lowering System transformer required if not available; Can be worked via optional PowerPack 8kW or assist crane with hydraulic interface; Attention: Should not be offered together with Emergency override HY; Note: Incl. Donor Interface
189-080-12
Battery disconnecting switch
Battery disconnecting switch for disconnection of the voltage source and the on-board power supply
187-303-02
Hook block 100-3-26-E
For 26mm Rope, 3-sheave (7-line) - required for 94t - Single hook
187-301-32
Hook block 41-1-26-E
For 26mm Rope, 1-sheave (3-line) - Single hook
187-300-92
Headache Ball 16-0/26-E
For 26mm Rope (14t) - Single Hook, red; With Transport holder at central ballast
185-500-92
HAV 23m
23m; Lattice jib, manual offset 0° /18°/36° with hydraulic assist cylinder, not with load; 2-sheave head (steel sheaves for 26mm rope); Incl. transport storage (only 5m jib can be stowed in transport position); includes cable remote control panel to adjust hyd cylinder consist in 3,5m foot section + 1,5m Tip Section + 6m intermediate section + 12m intermediate section possible jib length: 5m, 11m, 17m, 23m
185-690-12
R1 (Swing away rooster sheave)
Swing-away rooster sheave for 26mm rope, incl. transport storage; For single-reeving high speed operation with elevated hook height; incl. Electric and hoist limiter
Special Options:
1-270-22
Omit CE & EN13000
Built according to CE, but without CE documentation and without declaration of conformity; Deactivation of the specific EN13000 overload protection software
187-540-12
Conservation sea shipment
Conservation sea shipment
189-010-22
Hydraulic-oil -25°
Multigrade oil instead of standard hydraulic oil; Approved for ambient temperatures of -25°C to +50°C Maximum allowed oil working temperature is +88°C.
182-030-12
Engine pre-heater - External (220 V)
Engine pre-heater - External (220 V); Recommended for ambient temp. up to -30°C
182-231-42
Storage box at central ballast
Aluminium Storage box for tools (NO tools included); lockable and with handles; box size: 1000x500x500mm; NOTE: included in Option "Hydraulik Track Frame Pin Pusher"
182-500-32
Crawler shoes 2-grouser 1200mm
Crawler shoes 2-grouser 1200mm --> +2000 kg weight on complete machine
189-060-12
Jumper cable NATO-Clamp 5m
5m long jumper cable NATO-plug & battery clamps, adequate for use with any external power supply e.g. batteries
189-040-12
Battery charger
Battery chargers for carrier and superstructure with connection to external electric power source; Recommended for ambient temp. up to -30°C
承载量
容量
181.44 t
类别特定
Tip Height
59.74 m