2023 FONTAINE 16.15 m x 259.08 厘米

2023

FONTAINE

新建

A011811

Length / Width: 53 feet x 102 inches Suspension Type: Rear axle slide; This Trailer Design Does NOT Meet Proposed GHG2 Compliance Requirements Frame Rating: 80,000 lbs distributed - 52,000 lbs concentrated in 4 feet- GAWR and tire ratings determine legal payloads Flooring: Knurled extruded 3-1/8 aluminum,StirLITE Friction Stir Welded Floor with 2 wood nailer strips; Heavy wall extrusions in single coil area; Heavy wall extrusion at rear Side Rails: Exclusive Revolutionary RASR Rail Technology -- one piece routed aluminum designed for strength and impact Stationary Chain Cargo Tie Downs: 17 pair - recessed in siderails Stake Pockets: Routed Aluminum on 24 inch centers (2 load securement openings in between stake pockets) Rubrail: Integrated with side rail Main Beams: Extruded aluminum - 8.25 inch flange Kingpin: 30 inches Loaded Fifth Wheel Height: 49 inches Landing Gear: Jost AX100G19 ALUMILIGHT Aluminum Landing Gear with forward & rear bracing Bulkheads: None standard Number of Axles: 2 Axle Spindle: Tapered Brakes: Spring brakes, auto slacks, Aluminum air tank Air Line Filters: (2) Meritor In-line type installed ABS: 4S/2M - no cable or tool Axle Spread: 122 inches open - 54 inches closed - Meets California, Canadian RTAC and BC dimensional specifications in closed position Hub and Drums: 10-hole hub-piloted with outboard cast drums - STANDARD Wheel Ends: Grease in hubs - *** 5-year wheel end warranty *** Wheels: 22.5 x 8.25 Aluminum LvL One Buffed Tires: 295/75R 22.5 14PR OEM standard tires Tire Inflation System: None standard Suspension Detail: Hendrickson air ride Air Assist Slide Box Pins: Standard mount of controls on slider frame Auto Glad Hand Dump: Installed Electric Dump Valve: Wired to 7-way auxiliary socket to dump rear axle Front Corners: Tapered Electrical System: LED: 5 Lights/Side; Rear with 3 4-inch Round Lights/Side, 3 Round Lights Center Cluster Other Electrical Specifications: 4 way socket on rear with one hot/one ground pin for wide load and strobe light connections Paint: Black urethane on steel parts with Revolution decals - STANDARD Conspicuity Tape: Per NHTSA specs - installed in recess on rubrails Bumper: Bolt-On; Meets underride requirements Mudflaps: 1 set OEM standard behind rear axle only Spare Tire Carrier: None standard Winch Track: Dual full-length integrated aluminum -- double L design Sliding Winches: 12 standard; 6 each side; sliding rope hook/ winch strap hook retainers - STANDARD 27' Winch Straps: None standard 30' Winch Straps: None standard Sliding J-Hook for Ring vs. Flat Hook on 4" Strap: None standard Dock Bumpers: 1 pair rubber on rear Hubodometer: None standard Registration Holder: Install registration holder - OEM standard Tool Box: (1) Aluminum Double Do

16.15 m

259.08 厘米

铝

铝质底盘

11.00R22.5

串联

是