2021 IROCK ITC300 Used 岩石骨料破碎设备2021 IROCK ITC300 Used 岩石骨料破碎设备
    2021 IROCK ITC300 Used 岩石骨料破碎设备2021 IROCK ITC300 Used 岩石骨料破碎设备
    2021 IROCK ITC300 Used 岩石骨料破碎设备2021 IROCK ITC300 Used 岩石骨料破碎设备
    2021 IROCK ITC300 Used 岩石骨料破碎设备2021 IROCK ITC300 Used 岩石骨料破碎设备
    2021 IROCK ITC300 Used 岩石骨料破碎设备2021 IROCK ITC300 Used 岩石骨料破碎设备
    2021 IROCK ITC300 Used 岩石骨料破碎设备2021 IROCK ITC300 Used 岩石骨料破碎设备
    2021 IROCK ITC300 Used 岩石骨料破碎设备2021 IROCK ITC300 Used 岩石骨料破碎设备
    2021 IROCK ITC300 Used 岩石骨料破碎设备2021 IROCK ITC300 Used 岩石骨料破碎设备
    2021 IROCK ITC300 Used 岩石骨料破碎设备2021 IROCK ITC300 Used 岩石骨料破碎设备
    照片(9)

    2021 IROCK ITC300

    岩石骨料破碎设备
    CNY ¥4853,370 
    输入的价格为: USD $665,000
    租金:
    每月: CNY ¥255,441
    (输入的价格为 USD $35,000)
    Lease Prices:
    致电查询可用性

    Maxim Equipment

    联系人:Joe Jensen

    Ripon, California, 美国 95366

    访问我们的网站 (Opens in a new tab)

    租赁联络信息

    Maxim Equipment

    联系人:Joe Jensen

    Ripon, California, 美国 95366

    访问我们的网站 (Opens in a new tab)

    常规

    年限
    2021
    制造商
    IROCK
    小时
    2,360
    型号
    ITC300
    序列号
    92011
    状况
    二手
    库存号
    211004 CC10
    描述
    CRUSHING CHAMBER… Metso HP300 Cone Crusher Feed opening: 41” (1050mm) Crusher input speed: 750 - 950 rpm Crusher Drive: Direct drive Closed side setting adjustment: Hydraulic Level sensor: Ultrasonic Throw: 3.3” (84 mm) at discharge with new liners Power required: 300 Hp FEEDER… Feeder opening width: 36” (910 mm) Feeder drum crs.: 19’ – 8.2” (6.0 m) Drive: Hydraulic Feeder belt width: 48” (1200 mm) Motor: Danfoss OMSS 125 Gearbox: Bonfig 809 W2 24.2:1 Flow rate: 33.8 GPM (128 LPM) Adjustable speed: Yes Maximum speed: 42 rpm HOPPER… Length: 12’ – 4.9” (3.78 m) Width: 7’ – 2” (2.2 m) Volume: 6.5 yd3 (5 m3) levelled off, 8.1 yd3 (6.2 m3) heaped Material: ¼” sides + 3/8” Hardox® liners MAIN CONVEYOR… Stockpile height: 12’ – 9” (3.887 m) Belt width: 48” (1200 mm) Belt spec: Plain 500/3 8+2 Drive drum dia.: 13.7” (350 mm) Tail drum dia.: 10.6” (270 mm) Motor: OMV800 Flow rate: 23.7 GPM (89.6 LPM) Maximum speed: 112 rpm Angle adjustable: YES Quick release: YES POWERUNIT AND HYDRAULICS Engine: Volvo D13 Tier 5 Engine power: Volvo - 380 Kw (510HP) Engine speed: 1570 - 1900 rpm Cone drive clutch: PT-tech HPTO14TF1 Flywheel Pump 1 (Tracks/Feeder): Kawasaki K3VL80 Flywheel Pump 2 (Tracks/Main conveyor): Kawasaki K3VL80: LH PTO Pump 3 (Auxiliary/Lube/pilot): Turolla 29/29/10 Total system flow (max): 88.5 GPM (335 LPM) Hydraulic tank capacity: 211 gal (800 L) ELECTRICS… Emergency stops: 4 off, 2 feeder, 2 power unit Chassis cabling: Armored cable Start Siren: YES – 10 sec delay Control panel: Tedd Engineering / IFM Engine shutdowns: • Low oil pressure • High water temp • Air filter blockage (selectable) • Fuel contamination • Low hydraulic tank level • Low lube oil flow • Low lube oil pressure • High lube oil temperature • High hydraulic oil temperature Radio control tracks and feeder: STANDARD Pendant track control: YES – plugged in control cabinet TRACKS… Width: 15.7” (400 mm) Length: 13’ – 5.4” (4.1 m) crs Height: 32” (817 mm) Gearbox: Bonfiglioli 711 Ratio: 144:1 Motor: Rexroth A2FE90 Speed max: 0.93 mph (1.50 kph) Flow rate: 40.2 GPM (152 LPM) Multiple speeds: Three speed system selectable at control panel with smooth start / stop CAPACITIES… Diesel tank capacity: 290 gal (1100 L) Hydraulic tank capacity: 211 gal (800 L) SAFETY FEATURES… External belt alignment points External grease points Engine safety shutdown systems Full safety guarding for nip points