2015 SCHENCK PROCESS DMO60

2015

SCHENCK PROCESS

DMO60

1100100903700ADMO

二手

BELT SCALE

800 Tons/Hour WEIGHBELT FEEDER Belt Scale 10'2" Pulley Center Length with 60" Vulcanize Belt & INTECONT Terus MEASURING/CONTROL SYSTEM. Excellent condition used in Frac Sand loadout. Current New Price = $69,000. 1 of 5 like units currently for sale. MATERIAL: Frac Sand FEED RATE: 800 Short Tons/HR PARTICLE SIZE: 0.03 Inches BULK DENSITY: 80.0 - 100.0 lbs/cubic foot 1100100903 MODEL DMO60 10ft 2in WEIGHBELT FEEDER Equipment Area Classification: General purpose MACHINE DESIGN: PULLEY CENTER LENGTH: 10ft 2in BELT WIDTH: 60 inches INFEED DIMENSIONS: 48.0 inches wide by 30.0 inches long CENTERLINE OF INFEED TO DISCHARGE: 114.0 inches MOTOR POWER: 10.0HP NOMINAL BELT SPEED: 166.7 ft/min NOMINAL MATERIAL BED DEPTH: 6.0 inches COMPLETE WITH: • Infeed shear gate provided with one inch height adjustment • Controller to regulate weighbelt speed • Design: Rugged and heavy duty construction • Cantilevered construction with vulcanized endless belt facilitates replacement of belt from one side of the weighfeeder • The base frame components are: • 10" fabricated channel stringers and 8" fabricated channel legs • 12" diameter head pulley and 12" diameter tail pulley • 0.5" thick grooved lagging on head pulley • CEMA D 6.0" diameter carrying idlers with sealed ball bearings • Idlers have labrynth and face seals to retain grease and exclude dirt • Idlers are directly mounted to stringers providing absolute rigidity and permanent alignment • Weigh idlers are selected for concentricity • Motor: TEFC 460/3/60 NEMA C-Face • Gear Reducer: Shaft Mounted Right Angle C-Face Reducer • Direct drive system: Gear reducer and motor directly mounted on head pulley shaft • Digital speed sensor: Sensor is mounted between motor and reducer to provide high frequency and symmetrical speed signal • Drive system mounted on right side of weighfeeder (in direction of belt travel) • Load Cells: (2) Model PWS shear beam • Junction Box: NEMA 4 Type - contains connections for load cell, speed sensor, and belt tracking switch • Vulcanized endless belt enhances performance by providing more uniform weight • Premium quality belt with: • 1" Flanged Belt • 220.0 PIW rating EQUIPMENT DESCRIPTION Total Excavating - Schenck Process LLC Proposal #2020-114181-P5W-SS Rev 0 - October 29, 2020 Page 4 • 3/16" X 1/16" covers • Rated for up to 200 deg F • Gravity tensioning mechanism: Stabilizes belt sag between idlers, assures constant tension and provides reliable belt traction • Automatic belt tracking System for increased centralization force and allows for use of flat pulleys • Plow scraper • Belt tracking switches (1 pair) at infeed area • Calibration test weights • Zero speed switch on tail pulley shaft • Top and side enclosed machine with removable side covers (open bottom) • Non-product contact materials of construction: enamel-coated mild steel • Paint: Sherwin Williams Polane T Plus Polyurethane Enamel • Applied over KEM Aqua Wash primer • Color: Accurate Dark Gray (F63A3925-4357) - Similar to RAL 7005 • FDA Approved for incidental contact • VOC compliant • Minimum thickness (paint and primer) to attain manufacturer's specifications: 1.75 mils • Self-cleaning tail pulley • Stainless steel tagging • Discharge Cover 8 inch • SST Infeed • Extended skirtboard height 304 SST 2B Finish • Extended Frame Height • Adder for belt • CEMA E idlers Feeder Accuracy: +/-0.5% of set rate over 10:1 operating range. Test based on two minutes or two belt revolutions (whichever is greater). INTECONT® Tersus MEASURING/CONTROL SYSTEM User friendly, menu driven interface for programming, calibration and operation. The application of the system is selected via the type of software flashed into the unit. This unit is preprogrammed with software for monitoring and control of the feedrate throughput of the Weighfeeder listed above. COMPLETE WITH: • NEMA 4, IP54 wall mount enclosure • 24 VDC, 115 or 230 VAC power source compatibility • -13° to 140°F (-25° to 60°C) operating temperature • Graphical LCD display w/ adjustable brightness • Internal totalizer (resettable) • Qty (1) Analog input (4-20mA), input impedance 100 Ohm, - programmable • Qty (2) Digital inputs (NAMUR) [(1) high speed for optional speed sensor] • Qty (5) Digital inputs (18 - 36 VDC) - programmable • Qty (2) Analog output (4-20mA), load max. 500 Ohm, - programmable EQUIPMENT DESCRIPTION Total Excavating - Schenck Process LLC Proposal #2020-114181-P5W-SS Rev 0 - October 29, 2020 Page 5 • Qty (8) Digital outputs (230 VAC, 8A resistive, 1A inductive, dry contact) -- programmable • Qty (1) Pulsed totalizer output (24VDC, 100mA, 10Hz) • Qty (3) Serial connections -- Easyserve, printer, large display • Programmable alarms • Fieldbus - Modbus/Ethernet TCP (Onboard RJ-45 port) OPTIONS AVAILABLE: • Ethernet/IP, DeviceNet, Modbus, or PROFIBUS DP communication • Programming software (EasyServe) for commissioning assistance and parameter backup • Analog card w/ (2) analog inputs & (2) analog outputs • 100 feet 4-Pair 20AWG Load Cell Cable INTECONT® Tersus Fieldbus Interface, Allen-Bradley Ethernet/IP A Fieldbus Interface that permits a plant PC or PLC to directly control an INTECONT®-based control system. The Ethernet/IP communication protocol is transmitted over a standard Ethernet cabling system. • Communication Port: RJ-45 or screw terminal • Communication Speed: 10 Mbit • Communication Distance: 100 meters without repeaters