致电询价
常规
年限
2024
制造商
ROME
型号
TRCH20
状况
新建
描述
Hinge Offset Disk Harrow For use with tractors in the 280-304hp range.
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.
Width of Cut (ft/in): 14'0" (4.3m), Number of Disks: 20, Weight Per Disk: 729 lbs / 331 kgs, Net Weight: 14,582 lbs / 6,614 kgs.
20” (508mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings.
FEATURES:
• For deep plowing, plowing in heavy trash, mixing and aerating.
• Heavy duty proven design with rugged boxed angle construction welded for maximum
strength and rigidity.
• High gang carrier design to prevent trash build up and clogging.
• Adjustable disk blade scrapers.
• Equipped with Timken dual tapered roller bearings.
• Up to 850lbs (386kg) of weight per disk blade depending on model with an average of
775lbs (352kg).
• Up to 13” (330mm) maximum depth of penetration with standard 36” (914mm)
diameter disk blades.
• Levels, cuts and mixes to full working depth.
Standard Equipment:
• 36” (914mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
• Mechanical angling control.
• Adjustable disk blade scrapers.
• Heat treated alloy steel gang axles.
• Heavy duty cast steel spacer spools.
• Heavy duty bearing wear plates.
• Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
• Drawbar jack stand and safety chain.
Optional Equipment:
• Cylinder rod stops.
• Weight box.