2024 GEHL DL12-40 GEN 3 Used 伸缩臂叉装机2024 GEHL DL12-40 GEN 3 Used 伸缩臂叉装机
    2024 GEHL DL12-40 GEN 3 Used 伸缩臂叉装机2024 GEHL DL12-40 GEN 3 Used 伸缩臂叉装机
    2024 GEHL DL12-40 GEN 3 Used 伸缩臂叉装机2024 GEHL DL12-40 GEN 3 Used 伸缩臂叉装机
    照片(3)

    2024 GEHL DL12-40 GEN 3

    伸缩臂叉装机
    租金:
    致电查询可用性

    租赁联络信息

    Stan Houston Equipment Co. - Watertown, SD

    联系人:Scott Thill

    Watertown, South Dakota, 美国 57201

    常规

    年限
    2024
    制造商
    GEHL
    型号
    DL12-40 GEN 3
    序列号
    RENTAL DL12 40
    状况
    二手
    库存号
    RENTAL WT
    描述
    Gehl DL12-40 Gen:3 Telescopic Handler - Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised to 60 degrees or higher, or if the PWP System is activated. - 10-degree frame tilt in both directions. - Double universal joints for tight turn radius without applying stress on the axle. - Two-wheel, four-wheel, crab steering standard. - Standard centrifugal pre-cleaner and two-stage air cleaner. - Powershift transmission with four forward and two reverse gears. - Standard pneumatic tires. - Three steering modes – 4-wheel, 2-wheel and crab - Industry loading job site maneuverability with a 12' 2" turning radius. - Hydraulic powered

    类别特定

    容量
    5,443.11 千克
    Max Forward Reach
    8.03 m
    Maximum Lift Height
    12.29 m

    Exterior

    驾驶室
    封闭式

    内视

    Heater

    动力总成

    驱动
    4 轮驱动
    Travel Speed Empty
    36.69 km/h

    发动机

    马力
    85.76 kW
    Engine Tier
    USA Tier 4

    船运尺寸

    运输重量
    11,475.89 千克