2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    2024 BANDIT 2460XP New 卧式粉碎机2024 BANDIT 2460XP New 卧式粉碎机
    照片(14)

    2024 BANDIT 2460XP

    卧式粉碎机
    致电询价 
    租金:
    致电查询可用性

    Quality Equipment and Parts

    联系人:Randy McKenzie

    Lake City, Florida, 美国 32055

    访问我们的网站 (Opens in a new tab)

    租赁联络信息

    Quality Equipment and Parts

    联系人:Randy McKenzie

    Lake City, Florida, 美国 32055

    访问我们的网站 (Opens in a new tab)

    常规

    年限
    2024
    制造商
    BANDIT
    小时
    1
    型号
    2460XP
    状况
    新建
    小时表
    准确/验证
    库存号
    Q001161
    描述
    Brand New 2024 Bandit 2460XP coming in next week! This Cat powered 535HP Beast is sure to make the most of your production in the most efficient way possible. With a 24" x 60" opening this machine will grind any light brush and trees up to 24" in capacity. Bandit's patented cutter body system with cutting teeth makes this one of the most productive and fuel efficient machines in its class. ************************************************** New 2024 BANDIT 2460XP Beast Recycler *********************************************** Includes the following Standard: - Horizontal feed with a 36" diameter x 60" wide cutter mill (mill is equipped with 30 cutter bodies, teeth and rakers to be selected) - 24" high x 60" wide mill opening. - Full width adjustable anvil constructed with structural - 200 gallon fuel tank with magnetic drain plug and a direct-reading float style level gauge. - 120 gallon hydraulic tank with magnetic drain plug, aluminum fluid sight gauge, and shutoff valves. - 14'-8" long x 60" wide steel slat infeed conveyor direct driven by a hydraulic motor/planetary gear box combo with high tensile (WDH100) roller chain system - Hopper length is 13'-10". - 11'-6" long x 42" wide primary discharge conveyor and a 22'-9" long x 42" wide secondary height adjustable discharge conveyor with magnetic head pulley. (Has an approximate stacking height of 15'). - Single front hydraulic stabilizer with (2) cylinders. - 10 groove cutter head drive system, 5V Banded Kevlar belts and ductile iron sheaves. Housed in steel belt shield with access to check belt tension. - (4) engine shut down switches located on all four corners of machine. - 10 pound ABC Type Fire extinguisher with mount. - Lockable control cabinets for both hydraulic valves and machine control panel. - (2) heat actuated auto fire extinguishers; (1) mounted inside control cabinet and (1) mounted on/near engine (location varies by engine option). - Dust suppression system includes misting nozzles located over cutter mill, feed wheel and discharge - 24 volt system with rubber mounted LED taillights, 7 prong replaceable coiled power cord & protected heavy-duty wiring with junction box, and LED clearance lights with reflectors. Also includes (2) 1400 CCA batteries - (1) weatherproof machine manual (includes safety, operation and parts sections) also (1) engine and clutch manual is included if applicable - Proportional Feed System (Regulates feed system with 5 preset speeds ranging from 10 - 50 FPM and reverses feed system once engine goes below a set RPM, then re- starts feed system once engine re-gains full RPM). - (1) 20" diameter 59" wide floating feed wheel internally driven by a hydraulic motor/gearbox combination. Also features 1-3/4" teeth located around the diameter of the feedwheel. - Radio remote control with tether remote back-up and 50' of cord (Controls yoke up, infeed conveyor forward / reverse, feed wheel forward/reverse, infeed and discharge speeds, discharge height adjust, engine throttle, fan purge and engine e-stop). **************************************************** Included Options: - Standard Imron Industrial Urethane Bandit Yellow - Caterpillar C13B, 536 horsepower engine without clutch - Tier 4 FINAL (Includes 2 year / 2,000 hour engine warranty) - Includes 2 position reversing fan - Engine components and installation for Caterpillar C13, 536 horsepower (Includes (2) 1,400 CCA batteries) - Tier 4 FINAL - HPT012 dry clutch (Push button engage / self adjusting, does not require a coupling or aux tank) (Beast Units) (Can only be used on engines 540 horsepower and below) (For use on 24 volt engines) - Tandem 20,000 pound air brake axle - 385/65R 22.5, 16 Ply Super Single Tires Mounted on 10 Bolt Aluminum Rims - 3" pintle hitch with safety chains, slip hooks, and 7 prong replaceable coiled power cord - 12 Replaceable Raker style cutter body to be installed on machine - Double splitter tooth to be installed on machine - Double short shingle tooth to be installed on machine - 2 1/2" wide (90 degree) HD raker to be installed on machine (raker for 1425, 1680, 2460 and 2680/3680 w/ 60 tooth mill) - Raker insert bolt to be installed (All 90 degree rakers) - 3" modified diamond screen to be installed on machine (2 required) - 4" modified diamond screen to be installed on machine (2 required) - 5 year / 5,000 hour Platinum Warranty (C13 Cat Engines). (TREE CARE)

    类别特定

    最大树木直径
    60.96 厘米
    Remote Control
    Pull Behind

    动力总成

    马力
    398.95 kW

    船运尺寸

    运输宽度
    259.08 厘米
    运输长度
    1,300.48 厘米
    运输高度
    411.48 厘米
    运输重量
    21,772.43 千克