2008 BOART LONGYEAR DELTABASE 430 Used 垂直钻机2008 BOART LONGYEAR DELTABASE 430 Used 垂直钻机
    2008 BOART LONGYEAR DELTABASE 430 Used 垂直钻机2008 BOART LONGYEAR DELTABASE 430 Used 垂直钻机
    2008 BOART LONGYEAR DELTABASE 430 Used 垂直钻机2008 BOART LONGYEAR DELTABASE 430 Used 垂直钻机
    2008 BOART LONGYEAR DELTABASE 430 Used 垂直钻机2008 BOART LONGYEAR DELTABASE 430 Used 垂直钻机
    照片(4)

    2008 BOART LONGYEAR DELTABASE 430

    垂直钻机
    USD $220,000 

    Savona Equipment Ltd.

    联系人:Sales

    Savona, British Columbia, 加拿大 V0K 2J0

    常规

    年限
    2008
    制造商
    BOART LONGYEAR
    型号
    DELTABASE 430
    状况
    二手
    库存号
    1206373
    描述
    2008 Boart Longyear DB430 Rotary Drill Make: Boart Longyear Model: DB 430 Type: Rotary Drill Hours: 220 Compressor: None Engine: Deutz 4 Cylinder Mud Pump: Moyno 3L6 (New 2018, 16' Stroke, Mast is 20') Mounted On: Tracks Tools/Options: Rotary/Coring Head has been Upgraded to a LF540 Deck Engine is a 140 HP, 4.7 Liter Wireline Winch & a Pullmaster Winch Hydraulic Rod Rack with 400' of 2-3/8" API Drill Rod Dual Rod Clamps Breakout Wrench Specifications: Standard Drilling Systems 4" - 6.5": 300m (985ft) PRIME MOVER: Standard Unit: DEUTZ BF4M1013EC Diesel Engine Power (maximum): 104kW@ 2200 RPM (140HP @ 2200 RPM) Tank Capacity: 230 L (60 Gallons) Fuel Consumption: 195 Gal/kWh Electrical Circuit: 24 Volt NOTE: The engine has sufficient power to run the rig up to 2500 meters above sea level at 25 °C ROTARY HEAD DB430 - TORQUE ANO RPM RATINGS Low Gear: 4,600/75 Nm/rpm (33,501/75 lb-ft/rpm) High Gear: 2,300/150 Nm/rpm (1,675/150 lb-ft/rpm) Bore - Inside Diameter: 52mm (2in) Swivel - Inside Diameter: 24mm (1in) Rotation Motors: Danfoss OMT 160 Top Drive Flange: 2 3/8 API Reg Box Gear Ratio: 4.047:1 Distance from Drilling Line to Chain: 202mm (7.95in) HYDRAULIC SYSTEM Pump: Variable Load-Sensing with Torque Control Max Flow: 230 Lpm (60GPM) Max Pressure: 280 bar (4,060 PSI) Hydraulic Oil Volume: 160 L (42 Gal) Oil Cooler Capacity: 16kW (21.4HP) DRILL MAST AND FEED SYSTEM Feed Stroke: 4,000mm (13ft) Feed Speed - Down: 3.9m/min (12.7ft/min) Feed Pressure Control: +/- 350 N (+/- 78 lbf) Fast Feed Speed Up: 40m/min (130 ft/min) Down: 66m/min (215 ft/min) Pull Down Force: 35kN (7,715 lbf) Pull Back Force: 70kN (15,400 lbf) MAIN WINCH (Mast Top) Pull on Inner Layer(Maximum): 9kN (1,980 lbf) Line Speed: 35m/min (115ft/min) Cable Diameter: 8mm (5/16in) ROD CLAMPS Maximum Diameter: 220mm (8.7in) Clamping Sizes: 65 to 95mm sf (2.5in to 3.75in sf) Maximum Holding Force: 10kN (22,500 lbf) Break-Out-Cylinder Max Pull: 80kN (17,984 lbf) Max Push: 115kN (25,853 lbf) Break-Out-Tong Min. Rod Size: 66.6mm (2 5/8in) Max. Rod Size: 81.2mm (3 1/5in) ROD RACK: Capacity - 3" Rods: 60 Capacity - 3 1/2" Rods: 45 UNDERCARRIAGE: Driving Speed: Low Gear: 2.5 km/h (1.55 mph) High Gear: 4.8 km/h (2.98 mph) Maximum Grade Ability (Low Gear): 60% (~30° Deg) Rubber Tracks: Standard Location: Western USA