2022 MASABA 10X16 Used 岩石骨料输送机/给料机/堆垛机2022 MASABA 10X16 Used 岩石骨料输送机/给料机/堆垛机
    2022 MASABA 10X16 Used 岩石骨料输送机/给料机/堆垛机2022 MASABA 10X16 Used 岩石骨料输送机/给料机/堆垛机
    2022 MASABA 10X16 Used 岩石骨料输送机/给料机/堆垛机2022 MASABA 10X16 Used 岩石骨料输送机/给料机/堆垛机
    2022 MASABA 10X16 Used 岩石骨料输送机/给料机/堆垛机2022 MASABA 10X16 Used 岩石骨料输送机/给料机/堆垛机
    照片(4)

    2022 MASABA 10X16

    岩石骨料输送机/给料机/堆垛机
    USD $318,719 

    Crushing Equipment Solutions

    联系人:Todd Prather

    Paradise, Texas, 美国 76073

    常规

    年限
    2022
    制造商
    MASABA
    型号
    10X16
    序列号
    202225
    状况
    二手
    库存号
    10029
    描述
    PORTABLE 10’ X 16’ HOPPER WITH FEEDER & DISCHARGE CONVEYOR –HPF1016-4248 10’ x 16’ Hopper & Chassis • Tandem Axle Chassis – constructed of Heavy Duty wide flange beam • Heavy Duty 25,000lb Leaf Spring Suspension - with (8) 11R x 22.5 radial tires • Brake Package – air brakes, emergency valve, and plumbing • Light Package – brake and directional signals • Mud Flaps • Landing Jacks – (2) manual crank down landing jacks • Hydraulic Lifting Jacks – See Options • Lift Hooks – at kingpin end of plant • Cord Holder • 14 Cu. Yd. Hopper – Tapered self-relieving hopper design. 10’ wide x 16’ long, constructed of ¼” steel plate with baffle and adjustable canoe liners, lined with weld-in 3/8” AR400 • Adjustable Metering Gate – for adjusting material flow, with chain • Reversible Grizzly - See Options • Grizzly Bars – See Options • (2) Hopper Side Curtains – (1) rubber curtain on each side, removable without removing any bolts • (2) Hinged Bulkheads – (1) swing down steel guard to protect undercarriage each side 42” x 20’ Belt Feeder • Conveyor Frame – 10” Channel • Drive – Class II, Head V-belt drive with guard • Gear Reducer – Dodge TA #7 with sheave & bushings • Motor – WEG 40hp electric with sheave & bushings • Belt Speed – 100 FPM • Capacity – Up to 1050 TPH based on 100# per cu/ft of material • Drive Pulley – PPI, 18” diameter, rubber lagged drum pulley • Drive Shaft & Bearings – 4 7/16” shaft with Dodge Type E bearings • Tail Pulley – PPI, 16” diameter, self-cleaning wing pulley • Tail Shaft & Bearings – 3 7/16” shaft with Dodge SCM bearings • Snub Pulley – PPI, 12” diameter self-cleaning wing pulley • Snub Shaft & Bearings – 2 7/16” shaft with Dodge SCM bearings • Take Ups – screw type • Belting – 3-ply, 330 PIW, 1/4" x 1/16” conveyor belt • Belt Splice – Mechanical steel fasteners • Belt Scraper – Flexco EZP1 • Live Shaft Idlers – PPI, CEMA C, 5” diameter, rubber disc, live shaft impact idlers, 9” spacing • Live Shaft Idler Bearings – 1 15/16” Dodge VSC bearings, (2) per idler • Return Idlers – PPI, CEMA C, 5” diameter return idlers • Inverted Trough Idler – PPI, CEMA C, 5” diameter troughing idler, mounted on return side 48” x 48’ Discharge Conveyor • Conveyor Frame –12” channel • Drive – Class II Head V-belt drive with guard • Gear Reducer – TAII #6 with sheave and bushings, and backstop • Motor – WEG 40hp electric with sheave and bushings • Belt Speed – 350 FPM @ 18 Degrees • Capacity – Up to 1500 TPH based on 100# per cu/ft of material • Drive Pulley – PPI, 20” diameter, rubber lagged drum pulley • Drive Shaft & Bearings – 4 7/16” shaft with Dodge Type E bearings • Tail Pulley – PPI, 16” diameter, self-cleaning wing pulley • Tail Shaft & Bearings – 3 7/16” shaft with Dodge SCM bearings • Take Ups – screw type • Belting – 3-ply, 330 PIW, 1/4" x 1/16” conveyor belt • Belt Splice – Mechanical steel fasteners • Belt Scraper – See Options • Impact Idlers – PPI, CEMA C, 20 degree, 5” diameter rubber impact idlers, in loading area • Troughing Idlers – PPI, CEMA C, 35 degree sealed 5” diameter trough idlers, 4’ spacing • Return Idlers – PPI, CEMA C, 5” diameter return idlers, 10’ spacing • Hopper – 6’ long with adjustable rubber flashing • Adjustable Height Support – manual raise/lower with manual pin lock • Switchgear – See Options • Guards – Tail pulley guards, v-belt guards, and return roll guards. We do not warrant that our guards will meet all local codes. It is the responsibility of the end user to have them checked by a local inspector • Steel Shot Blasted • Primer – (1) coat of 2 part urethane primer • Paint – (1) coat of 2 part urethane paint • Owner’s Manual – (2) copies in English for maintenance and parts Options- included • (4) Masaba Lift Only Jacks – (Power Unit Not Included) • 13hp Electric Start Gas Powered Unit - pump, reservoir with filter, valve body, and plumbing • Manual Reversible Dump Grizzly - Static Grizzly Bars – 3/4" x 4” bar stock capped with 3/4" x 3” bar stock, 6” spacing • Self-Relieving Grizzly Bars with Optional 6” or 8” Openings – Grizzly consists of alternate static and self-relieving grizzly bars, (2) sets of bars, (1) set with a 2” cap for 8” grizzly openings and (1) set with a 6” wide cap for 6” grizzly openings • Hydraulic Lift Grizzly & Hydraulic Package - Hydraulically raise/lower grizzly top, 15hp electric motor, pump, reservoir, valve body, plumbing, and remote, and electric/manual valve • Vulcanized Belts – on each Feeder belt and Discharge belt • Belt Scraper – Flexco EZP1 Belt scrapers, (1) on 48” Discharge Conveyor • Hydraulic Raise Discharge Conveyor – Hydraulically raise and lower the conveyor ( Power Unit Not Included) • Switchgear – NEMA 4 enclosure with line reactor, branch breaker, and lockout for (2) 40hp motors, and a 15hp motor, main breaker with a handle, control transformer, 24dc power supply, timers for automatic open/close function, illuminated e-stop, stop/illuminated starts, +/- speed buttons, man/auto switch for open/close, hour meter and keypad mounted in the door • 100’ Lead Cord • Variable Frequency Drive – Variable Feeder belt Speed • Remote Control – remote and relays for start-stop of feeder and hydraulic pump and +/- speed control of drive.