2016 TEREX FINLAY 674 SUPERTRAK

2016

TEREX FINLAY

1,752

674 SUPERTRAK

TRX00674CDGGB3373

二手

240103

FEATURES: Hopper & Grid… • Adjustable height and angle remote tipping grid with wing plates. • Grid opening: 14’ (3651mm) • Remote control hydraulic tipping reject grid • Feed width wing plates: 15’8” (4.77m) • Feed height: 11’4” (3450mm) • Grid aperture: 4” (100mm) • Hopper capacity: 10.5cu yard • Drive: Hydraulic variable speed drive via high torque gearbox Belt Feeder • Beltfeeder belt width: 42” (1.05m) • Belt Spec: Plain 3 ply belt, EP630 • Speed: variable, 0- 53’ per min (0-16 mpm) • Wide mouth opening Main conveyor… • 39” (1000mm) 3ply belt, EP400, • Hydraulic drive • Belt speed: 328ft/min (100MPM) • Steel skirted full length of conveyor • 2 Anti-rollback Plates • Conveyor can be raised with onboard hydraulics while in transport mode to assist in mesh changing. Fines Conveyor… • 47” (1200mm ) 3ply belt, EP315 • Belt speed: variable speed upto 400 ft/min (120MPM) • Hydraulic drive • Discharge height: 14’4” (4.36m) • Variable angle 33 degree max • Rosta scraper on head drum • Stockpile capacity: 139 cu. Yds (106 cu. Meters) Side conveyors… • 26” (650mm) 3ply chevron belt EP315 • Belt speed: variable 0 – 397 ft/min (0 - 121MPM) • Hydraulic drive • Discharge height: 15’7” (4.76m) • Stockpile capacity: 192 cu. Yds (194 cu.meters) Oversize Plus Conveyor… • Drive: Hydraulic variable speed drive via high torque 500cc motor • Belt width: 20” (500mm) • Belt spec: Chevron, EP 315, 3 ply • Working Angle: Variable 23°(Max) • Speed: variable speed, 120 mpm (400’ per min) • Discharge Height: Variable 14’8” (4.47m) (Max) • Operating angle variable between 40º and 60º • Stockpile capacity: 149.6yd³ (114.4m³ ) Screenbox… • 5’ x 12’ Top & Middle Decks • 5’ x 10’ Bottom Deck • Wedge side tensioned Top and Middle Deck mesh • Hydraulic end tensioned bottom deck mesh • Drive: Hydraulic heavy duty 2-Bearing • Screen Angle: 18° - 37°, hydraulic adjust • Screen Speed: 1120 rpm • Screen stroke standard: 6mm (1/4”) • Abrasion resistant material impact plate • Spreader plate Powerunit & Hydraulics • Engine: CAT C4.4– output 111hp (83KW) • Fuel Consumption: Approximately 5 gal/hour Undercarriage… • 16” (400mm) wide track shoes. • Gradability: 25.5 degrees • Track movement over dog lead remote EXCLUDES: Freight or set-up, screen media or its installation, taxes, fees and permits