2021 RUBBLE MASTER MSC8500M-2D

2021

RUBBLE MASTER

2,500

MSC8500M-2D

MSC8500-2D-06-004

二手

SHAKER DECK SCREENER - 3 WAY SPLIT RUBBLE MASTER - MADE IN IRELAND SERVICED IN CALIFORNIA. PARTS IN CALIFORNIA. EXCELLENT CONDITION. RENTAL UNIT SERVICED REGULARLY BY GREENROCK. 3-INCH TOP DECK / 1-INCH BOTTOM DECK. 6 INCH TIPPING GRID. MORE PRODUCTIVE THAN A POWERSCREEN CHIEFTAIN 2100. Technical Description RM MSC8500M-2D Trackmobile incline screen RM MSC8500M-2D DESCRIPTION Heavy Duty Mobile Screener with Following Features:  Tracked Mobile  Heavy Duty High Energy 2 Bearing Screen Box  Hydraulic raise and lower of head section feed conveyor  Remote Controlled Tipping grid  Drop down fines conveyor for easier access to screen deck  Fast on site setup Time – 20 Minutes RUBBLE MASTER HMH GmbH, Im Südpark 196, 4030 Linz/Pichling, Austria Tel. +43/(0)732/737117, Fax +43/(0)732/737117-9 Technical Description RM MSC8500M-2D Erstellt von: ZUE 2/5 20.02.2019 DIMENSIONS AND WEIGHT Length – Transport 17700 mm (57’ - 11”) Length – Working 18800 mm (61’ - 5”) Width – Transport 3000 mm (9’ - 10”) Width – Working 17900 mm (58’ - 9”) Height – Transport 3500 mm (11’ - 2”) Height – Working 6100 mm (19’ - 9”) Weight – With tipping grid (Estimated) 30,500 kg (67,252 lbs.) CAPACITIES Capacity – 14ft Hopper 9.2m3 (12 yd3 ) Diesel Tank Capacity 320 L (70 US Gal) Hydraulic Tank Capacity 415 L (92 US Gal) FEED CONVEYOR Belt Width 1050 mm (42”) Belt Spec Plain 500/3 5+1.5 Adjustable Speed 0 – 0,25 m/s MAIN CONVEYOR Belt Width 1050 mm (42”) Belt Spec Plain 500/3 5+1.5 Maximum Speed 2,94 m/s Capacity: Max. 400 t/h throughput capacity depending on material and screen deck RUBBLE MASTER HMH GmbH, Im Südpark 196, 4030 Linz/Pichling, Austria Tel. +43/(0)732/737117, Fax +43/(0)732/737117-9 Technical Description RM MSC8500M-2D Erstellt von: ZUE 3/5 20.02.2019 SIDE CONVEYORS Stockpile Height 5100 mm (16’ - 9”) Belt Width 800 mm (31.5”) Belt Spec Chevron – 315/3 3+1.5 Speed (L/H Over Size Convr) 0 to 1,93 m/s Speed (R/H Over Size Convr) 0 to 2,46 m/s TAIL CONVEYOR (FINES) Belt Width 1200 mm (48”) Belt Spec Plain – 400/3 5+1.5 Stockpile Height 4960 mm (16’ - 2”) Maximum Speed 1,93 m/s SCREENBOX Screens- Top Deck 5’ x 4’ Side Tension (4 pic.) 5’ x 2’ Side Tension (1 pic.) Screen Dimensions- Top Deck 5485 mm x 1525 mm (18’x 5’) Screens- Bottom Deck 6’ - 10” x 5’- 2” End Tension (3 pic.) Screen Dimensions- Bottom Deck 4875 mm x 1525 mm (16‘ x 5’) Tensioning – Top Deck Bolted Tensioning – Bottom Deck Curved Tension Bar and Adjusters Screen Angle 20° to 30° Drive System Direct Drive with Flexible Coupling Screen Stroke Adjustable YES 6-10 mm Screen Shaft Speed 1120 rpm to 930 rpm RUBBLE MASTER HMH GmbH, Im Südpark 196, 4030 Linz/Pichling, Austria Tel. +43/(0)732/737117, Fax +43/(0)732/737117-9 Technical Description RM MSC8500M-2D Erstellt von: ZUE 4/5 20.02.2019 POWER UNIT AND HYDRAULICS Engines CAT C4.4 Tier 3 / Stage 3a. 98kW @ 2200 U/min. CAT C4.4 Tier 3 / Stage 3aK. 98kW @ 2200 U/min. Cummins QSL 3.8 L Stage 4/Tier4F, 97 kW@2200 Hydraulic Tank Capacity 415 l (92 US Gal) Hydraulic Oil Cooler YES with Thermostat Control Total System Flow 356 l (78 US Gpm) ELECTRICS Emergency Stops 4 pic, 2 @ Power unit RH&LH 1 @ Walkway 1 @ Feeder Start Siren Yes – 10 Second Delay Engine Shutdowns Low Oil Pressure High Water Temp Air Filter Blockage Fuel Contamination Low Hydraulic Tank Level Remote Tipping Grid YES, Timed Pendant Track control YES, Plugged in at Feeder End with E-Stop Flashing Beacon & Siren YES, (When Tracked) RUBBLE MASTER HMH GmbH, Im Südpark 196, 4030 Linz/Pichling, Austria Tel. +43/(0)732/737117, Fax +43/(0)732/737117-9 Technical Description RM MSC8500M-2D Erstellt von: ZUE 5/5 20.02.2019 TRACKS Width 500 mm (19.7”) Length 3800 mm (12’ – 6”) Height 800 mm (31.5”) Speed max 0.8 Km/h (0.5 Mph) Gradeability 24.5° Max Slope side to side 10° Attachment to Chassis Bolt On OPTIONS Wedge Tensioners on Top Deck Live Head (Vibrating Grid) Crusher Chute Radio Remote Control for Tracks Dustbuster Air Cleaner SAFETY FEATURES External Belt Alignment Points Engine Safety Shutdown Systems Full Safety Guarding for Nip Points CE-Compliance The manufacturer reserves the right to make technical updates.