2020 TADANO TL 300E

2020

TADANO

TL 300E

Used

00086

CRANE SPECIFICATIONS MODEL TL-300E CAPACITY 30,000 kg at 3.0 m BOOM 4-section full length power telescoping boom of box construction with 5-sheaves at boom head. 3rd boom and top boom telescope synchronously by means of a double-acting cylinder, an extension cable and a retraction cable. Hydraulic cylinders fitted with holding valves. Fully retracted length...............10.5 m Fully extended length ..............33.0 m Extension speed......................22.5 m in 125 s JIB 2-staged extension type.Triple offset (5ﾟ/25ﾟ/45ﾟ) type. Stored under base boom section. Single sheave at jib head. Length .....................................8.7 m and 14.5 m SINGLE TOP (AUXILIARY BOOM SHEAVE) Single sheave. Mounted to main boom head for single line work. ELEVATION By a double-acting hydraulic cylinder, fitted with holding valve. Elevation speed....................... -3ﾟ to 80ﾟ in 70 s HOIST - Main winch 2-speed type with grooved drum driven by hydraulic axial piston motor through planetary winch speed reducer. Power load lowering and hoisting. Equipped with automatic fail-safe brake with free-fall device by foot brake operation and counterbalance valve. Hoist lever is fitted with a high-speed switch. Controlled independently of auxiliary winch. Single line pull ..................32.8 kN｛3,350 kgf｝ Single line speed High range.....................110 m/min. (at the 4th layer) Normal range ................59 m/min. (at the 4th layer) Wire rope..........................Spin-resistant type Diameter × length..........16 mm X 180 m HOIST - Auxiliary winch 2-speed type with grooved drum driven by hydraulic axial piston motor through planetary winch speed reducer. Power load lowering and hoisting. Equipped with automatic fail-safe brake with free-fall device by foot brake operation and counterbalance valve. Hoist lever is fitted with a high-speed switch. Controlled independently of main winch. Single line pull ..................33.3 kN｛3,400 kgf｝ Single line speed High range.....................95 m/min. (at the 2nd layer) Normal range ................50 m/min. (at the 2nd layer) Wire rope..........................Spin-resistant type Diameter x length ..........16 mm x 105 m SWING Hydraulic axial piston motor driven through planetary swing speed reducer. Continuous 360ﾟ full circle swing on ball bearing slew ring. TADANO Twin Swing System enable to select powercontrolled or free swing. Swing lever is fitted with a horn switch. Equipped with hand-operated swing brake. Swing speed.....................2.5 min-1 {rpm} HYDRAULIC SYSTEM Pumps ..............................Quadruple gear pump driven by carrier engine through P.T.O. Control valves ..................Multiple valves actuated by hand levers with integral pressure relief valves. Circuit ...............................Equipped with air cooled type oil cooler. Hydraulic oil tank capacity ...approx. 430 liters Filters ...............................Return line filter CRANE CONTROL By 5 control levers based on ISO standard layout. CAB Steel construction with sliding door access and safety glass windows opening at sides, rear and roof. Cloth covered reclining seat with headrest is height-adjustable and back-and-forth adjustable. TADANO Automatic Moment Limiter (Model: AML-L) Main unit in crane cab gives audible and visual warning of approach to overload. Automatically cuts out crane motions before overload. With working range limit function. Working area for each outrigger position is given separately. Nine functions are displayed. Digital liquid crystal display: Either Boom angle or moment % Either boom length or potential hook height Either Actual working radius or swing angle Actual hook load Permissible load Either jib offset angle or number of parts line of rope Boom position indicator Outrigger position indicator Bar graphical display: Either moment as percentage or main hydraulic pressure and accumulator pressure (Display changes by alternation key.) OUTRIGGERS 4 hydraulically operated outriggers. Each outrigger controlled simultaneously or independently from either side of carrier. Equipped with sight level gauges. Floats mounted integrally with the jacks retract to within vehicle width. All cylinders fitted with pilot check valves. Extended width Fully ................................6,100 mm Middle .............................4,000 mm Minimum .........................2,080 mm Float size (Diameter) ........400 mm FRONT JACK A fifth hydraulically operated outrigger jack. Mounted to the front frame of carrier to permit 360ﾟ lifting capabilities. Hydraulic cylinder fitted with pilot check valve. Float size (Diameter) ........260 mm COUNTERWEIGHT Integral with swing frame. Mass .................................3,400 kg NOTE : Each crane motion speed is based on unladen conditions

27.22 t

12.67 m

14.5 m

14.5 m

Yes

Yes

Yes

Good

Yes

Yes

Good

Yes

4WD

64 km/h

202 kW

1,267 cm

249 cm

345 cm