USD $225,000
Machine Location:18851 CH CircleWaller, Texas, USA 77484(Opens in a new tab)
Seller Information
View Seller InformationGeneral
Year
2017
Manufacturer
ROADTEC
Model
RP175E
Hours
1,576
Serial Number
4026
Condition
Used
Meter Inaccurate
Accurate / Verified
Stock Number
EQ04803
Does Not Work
Operable
Description
Cummins QSB6.7 Tier 4 Final @ 174 hp
1/2” (12.5 mm) Thick Grade 80 Continuous Side Sheet Frame Construction
2 Hydraulically Driven Fans
Oscillating Push Rollers
Direct Hydraulic Planetary Drive
Dual Brake System; Hydrodynamic, Parking
11.5 Ton (10.4 MT) Capacity/200 ft3 (5.7 m3) Self Dumping Hopper
Electric Flow Gates
Independently Driven Variable Speed Feeder Conveyors
1/2” (12.5 mm) cast head and tail plates with chromium carbide clad floor plates
16” (406 mm) Cast Ni-hard Augers
Hydraulically Raise, Lower and Tilting Auger Assembly
Friction Drive Undercarriage
Operators stations hydraulically swing out past edge of machine for increased visibility
24 Volt Electrical System with Master Disconnect Switch
95 Amp Alternator
Clearview FXS Fume Extraction System
Amber Warning Beacon, Back Up Alarm and Fire Extinguisher
One (1) Operators Umbrella
Remote Central Point Tractor Lubrication
Lighted Dual Screed Control Stations for head of material and screed control with Fixed Remotes and lockable vandal covers
Retractable Wash-down System with 30’ (9.1 m) Hose Length (located on screed)
81.5 Gallon (308.5 L) Fuel Tank Capacity
Conveyor By-Pass Permits Independent Operation of Feeders
8" (203 mm) Hydraulic Tunnel Extensions
Road Light Package - Includes six 24V lights (2 hopper, 2 screed, 2 tunnel)
Electrical wiring and hydraulic hoses for connection to screed
Environmental release agent spray down system
1 Year factory warranty
EZ-IV-8 FRONT EXTENDABLE SCREED
8’ to 15’6" Hydraulically Extendable Carlson Easy Screed IV with Blade Electrical Heat
24 Volt Electrical System (Tier 4 Final Machine Only)
One 4’ (1.2 m) Long & One 3’ (0.9 m) Long Front Mounted Extensions
Electric Valves Control In/Out, Slope & Vertical Height
Carlson’s Patened “Front Taper Design” Main Screed
Main Screed is 26’’ Long, ½’’ Thick 400 BHN Screed Plate
Electric Heat with Thermostatically Controlled Temperature
Power Crown, 2 ½’’ Positive to ¾’’ Negative
Electric screed Heat Provided by Continuous Duty 34 kW Generator and Dedicated Hydraulic Pump
Thermostatically Controlled Plate Temperature with Analog Display
5.5 KW @120 Volts Available for Accessory Use in 8 Outlets
Heater Hold Down System Allows Heater Change Without Removing the Screed Plate
Electrically Heated Oven for Warning Meals
Spring-Loaded Two-Piece End Gates
20’’ Wide Main Screed Hinged Heavy Duty Walkway
12’’ Wide Hinged Extension Walkways
Sonic Feeder Control System
Tow arms with mounting locations for automatic grade controls
Options Included in Our Price
24V LED Night Light Package - Includes Six 24V Lights
Automated Lubrication System
Environmental Release Agent Spray Down System – Includes 13 Gallon (49 L) Tank and Pump (Replaces Standard Wash-down)
Sonic Grade and Slope Control - Features Dual Sonic Grade Sensors and Single Slope Sensor.
Pair of Heated End Gates
Clockwise Raise Angle of Attack Screws
Auger Extension Remotes - Remotes attached to fixed remote on left and right sides to controls augers and extensions. Includes a 6 ft cord and can be disconnected for storage.
Attachments
Heated End Gates
Yes
Sloping Extensions
Yes
Sonic Augers
Yes
Category Specific
Max Paving Width
4.72 m
Min Paving Width
2.44 m
Hydraulically Extendable
Yes
Vibratory Screed
Yes
Generator System
Yes
Adjustable Auger Height
Yes
Push Roller
Yes
Dual Operator Stations
Yes
Grade Control Ready
Yes
Walkboard Extensions
Yes
Washdown System
Yes
Emergency Stop
Yes
Chassis
Track Type
Rubber
Engine
Engine Manufacturer
CUMMINS
Engine Model
QSB6.7
Engine Tier
USA Tier 4
Overhaul
Yes
Hours Since Overhaul
464