Call for price
Machine Location:2406 US-78Tallapoosa, Georgia, USA 30176(Opens in a new tab)
Seller Information
View Seller InformationPro Grade Equipment
Contact:Paul Hofius
Phone:+1 678-726-6167
Tallapoosa, Georgia, USA 30176
General
Year
2024
Manufacturer
WACKER NEUSON
Model
EZ36
Hours
0
Condition
New
Hours Meter Inaccurate/Broken/Rolled Over
Accurate / Verified
Description
Call for pricing and availability. Nationwide shipping!
EZ36 Tracked Zero Tail Excavator: Compact design and high performance
Get in and start working – with the EZ36, performance meets maximum efficiency. This zero tail excavator is ideal if compact dimensions are needed. Minimal rear overhang makes working along walls and other obstacles an easy task. The machine features intuitive operation using a joystick, display and jog dial, as well as a comfortable working environment. This leaves the operator in full control of the application. Configurable to meet a customer’s requirements, the EZ36 offers dealer-installed options, including a hydraulic thumb and rotating beacon.
Comfortable, fully glazed cab
The large, fully glazed and tiltable cabin with roof window offers the operator an optimal 360° visibility of his work area. This gives the operator a good view of his working area, colleagues and any dangers. Meanwhile, available despite this.
It can be easily disassembled for service and repair work. All hydraulic functions of the excavator meanwhile remain available despite this.
Optimized drive concept
The well thought-out drive concept with optimized engine-pump management allows quick and precise control of the excavator. This makes up to 15 percent faster work cycles possible. The available engine versions are low in consumption and require no exhaust after-treatment.
VDS Vertical Digging System
The vertical digging system compensates for slopes of up to 15 degrees, making it possible to vertically excavate on a slope. This is not only ergonomic for the operator, but it also saves time and also means less excavated material.
Up to 25 percent material and time savings when excavating and filling. Safe working and higher stability in sloping spaces.
The same swing power over 360 degrees allows fatigue-free work with the seat position remaining the same.
Zero Tail
When space is limited: Pivot safely, even in the tightest of spaces or right next to the wall - with the Zerotail excavator without rear overhang, no problem.
Optimal working in limited working conditions, high maneuverability and time savings are guaranteed.
8 large tie-downs
Six large tie-downs on the vehicle chassis and two on the dozer blade make loading and transport easy and safe.
Mechanical Output Details
Superstructure turning speed 9.5 kg/m2s
Travel speed 2.9 m/H
Break Out Force Bucket 7,868.3 Anz
Break Out Force Lift Arm 4,743.5 Anz
Mechanical Details
Length 216.9 "
Operating weight (min.-max.) 8,196.8 - 10,901.9 lb
Digging depth (max.) 137.7 "
Width 68.9 "
Height 106.7 "
Engine
Cylinder 3
Cylinder capacity 100.2 Inch3
Inclined position max. 30 λ
Effective power 24.4 fps
Nominal Engine speed 2,400 kg/m2s
Battery capacity (nom. value) 71 cos φ
Motor type Diesel engine
Fuel type Diesel EN 590
Exhaust-gas limit EU Stage V
Manufacturer Yanmar
Engine designation 3TNV88
Hydraulic
Operating pressure 3,480 lb/h
Flow rate max. 31.7 PS
Operating pressure slewing gear 195 bar
Hydraulikpump Axial piston and 2 gear pumps
Operating Fluids
Cooling fluid volume 5.3 g/cm3
Hydraulic fluid volume 65 g/cm3
Shipping and Storage
Shipping weight 7,780.1 lb
Chassis
Drive unit Axialpistonmotor with RGU
Dimensions
VDS
A Height with cab 98.15 in 101.38 in
A Total height with rotating beacon 103.5 in 106.7 in
A1 Height of dozer blade 14.1 in 14.1 in
B1 Width of cab 38.6 in 38.6 in
B2 Width travel gear 68.9 in 68.9 in
B3 Width of dozer blade 68.9 in 68.9 in
C Transport length 216.82 in 216.27 in
D Digging depth max., short shovel arm 127.93 in 124.98 in
D Digging depth max., long shovel arm 137.78 in 134.83 in
E Piercing depth max., short shovel arm 83.65 in 80.69 in
E Piercing depth max., long shovel arm 92.98 in 90.03 in
F Piercing height max., short shovel arm 194.05 in 197.16 in
F Piercing height max., long shovel arm 200.23 in 203.19 in
G Dumping height max., short shovel arm 131.44 in 134.39 in
G Dumping height max., long shovel arm 137.47 in 140.42 in
H Digging radius max., short shovel arm 208.74 in 207.64 in
H Digging radius max., long shovel arm 219.93 in 218.51 in
I Max. reach at ground level (short shovel arm) 212.41 in 211.89 in
I Max. reach at ground level (long shovel arm) 222.26 in 221.78 in
J Tail swing radius 36.76 in 36.76 in
K1 Boom offset max. (to center of bucket right side) 26.79 in 26.79 in
K2 Boom offset max. (to center of bucket left side) 25.61 in 25.61 in
L Stacking height max. (dozer blade above surface) 15.48 in 15.48 in
M Digging depth max. (dozer blade below surface) 19.9 in 19.9 in
N Length travel drive 81.24 in 81.24 in
O1 Max. swivel angle (arm system to the left) 70 ° 70 °
O2 Max. swivel angle (arm system to the right) 45 ° 45 °
Q1 Boom swing radius right 55 ° 55 °
Q2 Boom swing radius left 70 ° 70 °
Category Specific
Operating Weight
4,945.02 kg
Exterior
ROPS
Enclosed
Engine
Engine Manufacturer
Yanmar
Engine Model
3TNV88