2023 TADANO MANTIS GTC 2000

2023

TADANO MANTIS

GTC 2000

18127

New

2023 Tadano GTC2000 base crane: width=3000mm; 47t (40t with optional "Transport optimization - removable extension beams and outriggers ISO Safety decals (ISO 13200) Standard ISO decals, applicable in most countries, US Safety decals (ASME with text) possible through Country Code Control System & Operator aids Load Moment Indicator IC-1, with Integrated load moment indicator acc. EN13000; Color display; Displaying of current operating conditions, load charts, fault indicator; Signal lights indicating LMI-load; Crane data logger Slope angle related load charts Calculation of lifting capacity subject to Track base (3 symmetrical track width configurations) and ground angle (automatic determination of permissible lifting capacity based on track width setting); Incl. Automatic counterweight detection. IC-1 Plus (Slewing angle and track width related Capacity Chart) Calculation of lifting capacity subject to Track base, Slewing angle of superstructure and ground angle; Variable track width possible (infinitely adjustable in unpinned positions incl. non-symmetrical). IC-1 Remote Crane is equipped with IC-1 Remote Track width basis monitoring Surveillance of each track frame (horizontal position); Warning in case of anomaly in crane cabin CWT monitoring Detection of CWT amount and warning message in case the real CWT does not match with the selected configuration Central Ballast Monitoring Detection of Central Ballast presence and warning message in case central ballast is not installed Hook height indication H1 Displaying and programmability of the hook height H1 by IC-1 Working range limiter Displaying and programmability of the work range limits by IC-1 Anemometer Disconnectable, to allow use with all extensions Painting & Optics Painting TADANO blue/white Single basecoat, topcoat in TADANO standard, Counterweights all surfaces, Upper crane, Jib in Blue (RAL5002), Central Ballast, Car Body, Crawlers, outriggers in Black (RAL9005); NO chevron warnings in red-white at outriggers, Boom in White (RAL9016). Access Lose Multi-purpose ladder Loose stepladder for misc. assembly work; Incl. transport storage for access to Cabin (when crane is on trailer), HW2, right hand side (tanks, engine), jib, boom tip, CWT, etc Dedicated Storage location on outriggers (during transport) and on crawler frames (on job site) Integrated ladder in crawler frame Permanent Ladders (2x) at each crawler frame, inclinable for comfortable access/egress Walkway/platform on crawlers Large Platform on crawlers with fixed platform and slidable platform to be connected to car body Walkway/platform on car body Large Platform on car body, removable for access to elec control box or hydraulic blocks and components Antislip central ballast anti-slip walkable top surface on central ballast Antislip Counterweight slabs anti-slip walkable top surface on CWT slabs Hoist rope reeving ROPE and STICK light reeving rope for hoist rope reeving, to be attached to hoist rope and guided along the main boom with stick and with ladder at boom tip into sheave; storage place for stick at lose ladder on undercarriage (accessible from ground and always transported with base crane); reeving rope is part of the standard tool set Handhold Bars for access on CWT 2 Bars on left side and 1 bar on right side; provides 3-point contact access when accessing/agressing to/from CWT (e.g. for H2 installation or winch inspection); includes transport stowage position and securing clips Maintenance & Lubrication Automated central Lubrication on upper crane Centralised lubrication lines, automatic (time-controlled), fur upper crane greasing points only (Slew Ring, Pivot point (Boom), hoist winch Central Lubrication in Undercarriage Multiple centralised lubrication lines, to be fed manually (greasing gun): for e.g. extension beams Oil sealed rollers and idler wheel easy maintenance oil sealed bearings Greased sheaves All sheaves are with greasing points (boom and jib and hook blocks) Visibility & Communication - Lights & cameras LIGHT_Cabin Front Light 1x work area (Front) at crane cabin front side LIGHT_Additional work lights on superstructure cab 3 additional LED work lights on superstructure cabin; 1 work light pointing towards hoist (H1 and H2) and 2 work lights for illumination of front working area; All three work lights are manually adjustable; the lights on the left can also be oriented to the side to illuminate the access to the cabin. Rotary beacon preparation 1x disconnectable at Superstructure tail; electric preparation only MIRROR_Side mirror (left side) Mirror enabling visual observation of the side & rear area of superstructure cab's side (left); mirror holder is clamped to the handrail and can be swung away. CAMERA_Rear camera Camera covers the crane's entire rear area behind the counterweight, camera can be positioned either at rear end of superstructure (if H2 is not installed) or at the end of the H2 frame (when H2 is installed) CAMERA_Blind spot camera Camera covers the crane's blind spot on the right CAMERA_Hoist monitoring H1 & H2 Visualisation H1 and H2 by a camera system; Displayed on a dedicated camera display in the cabin; Includes one floodlight pointing at the hoists (H1 and H2). DISPLAY_display screen in cabin Display screen for the different cameras enabled for monitoring in the crane cabin. LIGHT_Double work floodlight at Boom Two adjustable floodlights, mounted at front of boom base section; electrically adjustable from cabin LIGHT_Positioning light / flight light Disconnectable red light, to allow use with all Boom/jib combinations; requires anemometer (offered in standard scope) Storage & Accessories Slings & Chain box at central Ballast Open Storage box integrated into central ballast, for slings, shackles & tools, no slings and chains included! Tool Set Toolkit for light repairs and service Fire extinguisher Mount on superstructure behind cabin, possibility to choose another fire extinguisher Holder for Fire extinguisher Holder only (no fire extinguisher included), mounted on superstructure behind cabin, can hold various types of fire extinguishers Basic Equipment - Undercarriage Undercarriage Complete Undercarriage Self-Assembly ability for Crawlers and central ballast Transport optimised undercarriage height (1000mm ground clearance to adapt to any trailer height) Removable Outriggers (incl. Cylinder), quick couplings and connectors for easy coupling/disconnecting of hyd hoses and electric cables dedicated lift points and clear indication of component weight Car Body Car Body Bottom car body design suitable for any trailer type, incl. Double beam, gooseneck, etc. Track Extension Beams Track width Track width adjustment (adjustable with 3 symmetrical positions) 3500mm, 4750mm, 6000mm (CL-CL) Track adjustment possible on the spot or during travelling (control from cabin or with remote control) integrated protected extension cylinders Transport Optimised Version: Removable extension beams (41t instead of 47t) Removable track extension beams (incl. Hyd Cylinder), quick couplings and electric connectors for easy coupling/disconnecting of hyd hoses and elecric cables. dedicated lift points and clear indication of component weight Crawlers Crawler Track Components B9HD components (260mm pitch), excavator type, oil lubricated sealed rollers and idler wheel Crawler shoes 2-grouser 1000mm Crawler shoes 2-grouser 1000mm Crawler Drives GFT330 gearboxes with 1450kN Traction force with speed sensor Gradeability 50% Crawler Assembly Self Assembly with 4x Container lift points accessible from the upper platform. Pinning of crawler frames to Extension Beams is manual. Hydr and Elec quick coupling for quick and reliably assembly/disassembly) Central Ballast Central Ballast 2x7,5t steel box type central ballast with: - anti-slip top surface for improved access/egress all around the upper crane - integrated lift points (mushrooms) for efficient and safe handling; lift point are design to create a slight angle for efficient and accurate positioning and centering during installation to car body - Accessible manual pinning to secure central ballast; no lose part, no risk of losing parts - geometry with slope angle to mitigate ground interference whilst travelling on rough terrain - on one central ballast: large rack plate for tool box or other customised storage items - on other central ballast: large robust box, integrated in central ballast structure, for storage of slings, including with self-assembly (open top) - Includes automatic CWT detection/monitoring interacting with Load Moment Indicator (sensor belongs to car body) - Upper CWT is centred on central ballast for automatic reliable CWT rigging (no CWT stacked on ground) Outriggers Outriggers Outrigger legs with 2 positions (Transport in length direction, assembly in outward direction) outrigger cylinders can tumble (with assistance spring allowing low ergonomic human force) to maximise ground clearance in operating mode and ensure compactness on trailer during transport Cylinders with integrated check valves and pressure sensor, allowing auto levelling Outrigger pads 4 rectangular outrigger steel pads A=0,17m² outrigger pads can remain on cylinders, even in tumbled position (no need to detach and handle pads, no impact on ground clearance) 2x2 handles to allow comfortable handling when pads are removed storage place at the side of the outrigger leg Basic Equipment - Superstructure Standard Options: 182-370-12 Display data logger indication of data logger on crane Display ; Data recorded by datalogger displayed on the display in the crane cabin; possibility to download data with USB-port 189-050-12 Remote control Control of Rigging and operations via wireless remote control, for all functions incl. Travelling and self assembly 182-420-12 LIGHT_Lights to REAR and RIGHT hand side Additional job site LED lights attached to camera holder, for surrounding areas, usually goes along with side and rear camera 183-050-22 Aux Hoist H2 2nd Hoist; Spring-loaded multi-disc brake; Resolver (hoist rotation indicator); Incl. quick couplings; Rope twist prevention is not included identical performances, size, rope line pull, speed and length 26mm rope, 1960MPa, Length H1=245m, line pull= 136,6kN, line speed= 139m/min convenient and safe reeving with reeving rope and rope guiding stick includes 26mm rope socket includes load spectrum monitoring: device to record load spectrum of hoists with memory box attached to Hoist winch to allow recording of loads irrespective of the crane the winch is installed on. 183-280-12 Self-rigging H2 Makes it possible to mount H2 without assist crane; With transport frame; H2 is not included; includes cable remote control panel to control the jack-up cylinders 187-330-12 Rope twist prevention H1 Rope twist prevention for rope diameter d=26mm; Avoids rope twist of hoist 1 187-330-22 Rope twist prevention H2 Rope twist prevention for rope diameter d=26mm; Avoids rope twist of hoist 2 183-200-12 Emergency lowering system HY Hydraulic interface on crane in accordance with BG (German employers’ liability insurance association requirements) in case of engine failure; Makes it possible luffing, hoisting and slewing (no movements which increases the load moment); Emergency lowering System transformer not included; Optional emergency lowering System transformer required if not available; Can be worked via optional PowerPack 8kW or assist crane with hydraulic interface; Attention: Should not be offered together with Emergency override HY; Note: Incl. Donor Interface 189-080-12 Battery disconnecting switch Battery disconnecting switch for disconnection of the voltage source and the on-board power supply 187-303-02 Hook block 100-3-26-E For 26mm Rope, 3-sheave (7-line) - required for 94t - Single hook 187-301-32 Hook block 41-1-26-E For 26mm Rope, 1-sheave (3-line) - Single hook 187-300-92 Headache Ball 16-0/26-E For 26mm Rope (14t) - Single Hook, red; With Transport holder at central ballast 185-500-92 HAV 23m 23m; Lattice jib, manual offset 0° /18°/36° with hydraulic assist cylinder, not with load; 2-sheave head (steel sheaves for 26mm rope); Incl. transport storage (only 5m jib can be stowed in transport position); includes cable remote control panel to adjust hyd cylinder consist in 3,5m foot section + 1,5m Tip Section + 6m intermediate section + 12m intermediate section possible jib length: 5m, 11m, 17m, 23m 185-690-12 R1 (Swing away rooster sheave) Swing-away rooster sheave for 26mm rope, incl. transport storage; For single-reeving high speed operation with elevated hook height; incl. Electric and hoist limiter Special Options: 1-270-22 Omit CE & EN13000 Built according to CE, but without CE documentation and without declaration of conformity; Deactivation of the specific EN13000 overload protection software 187-540-12 Conservation sea shipment Conservation sea shipment 189-010-22 Hydraulic-oil -25° Multigrade oil instead of standard hydraulic oil; Approved for ambient temperatures of -25°C to +50°C Maximum allowed oil working temperature is +88°C. 182-030-12 Engine pre-heater - External (220 V) Engine pre-heater - External (220 V); Recommended for ambient temp. up to -30°C 182-231-42 Storage box at central ballast Aluminium Storage box for tools (NO tools included); lockable and with handles; box size: 1000x500x500mm; NOTE: included in Option "Hydraulik Track Frame Pin Pusher" 182-500-32 Crawler shoes 2-grouser 1200mm Crawler shoes 2-grouser 1200mm --> +2000 kg weight on complete machine 189-060-12 Jumper cable NATO-Clamp 5m 5m long jumper cable NATO-plug & battery clamps, adequate for use with any external power supply e.g. batteries 189-040-12 Battery charger Battery chargers for carrier and superstructure with connection to external electric power source; Recommended for ambient temp. up to -30°C

181.44 t

59.74 m