2017 PRINOTH PANTHER T12

2017

PRINOTH

PANTHER T12

1,581

935300058

Used

Accurate / Verified

6381D

Welding Rig

Operable

The Prinoth Panther T12 is an extremely versatile rubber tracked crawler carrier with a truck inspired chassis. With very low ground pressure, loaded and unloaded, these machines are designed to go nearly anywhere without much effort. Their 34-inch-wide chassis allows them to be outfitted with a number of different implements, making them an ideal platform for many applications. This track truck is equipped with a Vanguard CPW 125-4 welding rig. For more information about purchasing or renting this machine, do not hesitate to contact Multi Machine Inc. Machine Specifications Capacity: 25,000 lbs. Ground Pressure (Empty): 2.94 psi Ground Pressure (Loaded): 5.91 psi Engine: Caterpillar C7.1 ACERT Horsepower @ 2,200 RPM: 250 HP Torque @ 1,400 RPM: 895.4 lb-ft Max Speed: 6.2 mph Fuel Tank Capacity: 65 gallons Uphill/Downhill Gradeability: 60% Side Hill Gradeability: 40% Welding Rig Specifications- Generator Module- Design: 170 hp 6 cylinder engine equipped with 24 volt starting system, idle control, ether starting aid, block heater, pan heater, heavy duty radiator, primary and secondary fuel filters, and a 156 kVA generator. Rating: 156 kVA @ 60 Hz, 125 kVA @ 50 Hz Control Distribution Module- Design: Control Box Nema 3 with Nema 4 enhancements mounted on isolators with 2 lockable doors CSA/UL/CE Approved. Rating: 200 AMP Air Compressor Module- Design: Gardner-Denver/Champion with four opposing cylinders, pressure lubricated for off-level operations, vibration mounted. The compressor is equipped with an aftercooler that removes up to 65% of the moisture from the compressed air. Duty Cycle: 70% at 250 psi (17.2 bar), or continuous with synthetic oils. Air Tank Module: Design: Low profile vertical air receiver certified to ASME code Rating: 115 US gal. (435.3 liters) at 250 psi (17.2 bar) Welder Module Design: 4 welders of customer's choice, mounted in lockable box and vibration mounted, with sliding shelves for ease of servicing Crane Specifications Capacity: 12,000 lbs (5,443 kg) at 6 ft (1.83 m) Rating: 85,000 ft-lb (11.75 t-m) Length: 30 ft (9.14 m) fully extended Weight: 3,140 lb (1,379 kg) Chassis: Class 7 (29,000 GVWR)

11.11 t

Rubber

Enclosed

Yes

Excellent

250 HP

CATERPILLAR

C7.1 ACERT