建設用付属装置 販売用 From Leonard Truck & Trailer, Inc. - North Jackson, Ohio

60" TITAN ATTACHMENT ROOT RAKE GRAPPLE V2

V60 Industrial Rotary Cutter High Flow 39 GPM Max: Cut width 78"-Overall width 84"-Overall height 20.1"-Overall depth 86.3"-Deck height 8.3"-Push bar height 23.4"-Minimun cut height 2.3"-Cutting ca...See More Details

V40 Rotary Brush Cutter: 25 GPM max open front deck-Cut width 72"-Overall width 78"-Overall height 21.4"-Overall depth 82.1"-Deck height 7.7"-Push bar height 19.7"-Minimum cut height 1.9"-Cutting c...See More Details

V60 Hydraulic Snow Blade/Pusher Combo: Overall width, straight 124.5"-Width at full angle, both wings open 110"-Width at full angle, one wing open 86"-Width at full scoop 96.5"-Main moldboard width...See More Details

THIS ATTACHMENT INCLUDES UNIVERSAL SKID STEER MOUNTING HOSES, COUPLERS & POLY/WIRE WAFER PACK The Virnig Pick-up broom efficiently sweeps dirt into the attached bucket, which is then easily emptied...See More Details

V50 Rotary Brush Cutter: 25 GPM max open front deck-Cut width 78"-Overall width 84"-Overall height 21.4"-Overall depth 88.3"-Deck height 7.3"-Push bar height 20.4"-Minimum cut height 2.0"-Cutting c...See More Details

Cuts up to 4″ diameter trees and clears grass and brush for a consistent finished look. DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVES HYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDS ST...See More Details

V60 Hydraulic Snow Blade/Pusher Combo: Overall width, straight 148.5"-Width at full angle, both wings open 131"-Width at full angle, one wing open 107"-Width at full scoop 120.5"-Main moldboard wid...See More Details

V30 COMPACT TRACTOR SKELETON ROCK GRAPPLE THIS ATTACHMENT INCLUDES UNIVERSAL SKID STEER MOUNTING Redesigned as a two-cylinder independent grapple. 25% lighter than previous version to haul m...See More Details

BENT-AXIS PISTON MOTOR WITH RELIEF VALVES STANDARD MOTOR GUARD & SPINDLE GUARD 60 FULLY-MACHINED PERFECTLY BALANCED QUADCO DISC BOLT-ON STEEL TOOTH MOUNTS WITH FOUR-SIDED ROTATABLE & REPLACEABLE...See More Details

Tree Puller: Overall Width 47"-Overall height 22"-Overall depth 37.3"-Jaw opening 11.5" to quickly pull out trees and fence post-Cylinder bore 2"/Stroke 8.375"-Cylinder pins 1.25"/Pivot pins 1.563"...See More Details

TRENCHER Designed to quickly and reliably dig trenches 36, 48, or 60 inches deep. DIRECT DRIVE MOTOR with relief valve protection manual side shift Allows operator to dig near structures and other ...See More Details

V30 ROOT RAKE GRAPPLE Two-cylinder, single jaw grapple for digging, raking, piling and loading debris. Unique design allows efficient forward and reverse operation to drag loose material into piles...See More Details

THIS ATTACHMENT INCLUDES UNIVERSAL SKID STEER MOUNTING HOSES, COUPLERS & FITTINGS CYLINDER GUARDS STANDARD Cast, pin-on teeth allow the V50 Root Rake Grapples to cut deep into and underneath ro...See More Details

V40 Skeleton Grapple: 35.2" Jaw opening-Overall width 73.5"-Height Overall 26.5"/bucket 20.3"-Overall depth 36.9"-Number of teeth 9-Space between tines 8.5"-Cylinder Bore 2.0"/Stroke 8.375"-Cylinde...See More Details

V40 Skeleton Grapple: 35.2" Jaw opening-Overall width 73.5"-Height Overall 26.5"/bucket 20.3"-Overall depth 36.9"-Number of teeth 9-Space between tines 8.5"-Cylinder Bore 2.0"/Stroke 8.375"-Cylinde...See More Details

V50 Skeleton Grapple: 36.1" Jaw opening-Overall width 85.5"-Height Overall 27.8"/bucket 21.3"-Overall depth 39.9"-Number of teeth 15-Space between tines 5.5"-Cylinder Bore 2.0"/Stroke 8.375"-Cylind...See More Details

V50 Skeleton Grapple: 36.1" Jaw opening-Overall width 79.5"-Height Overall 27.8"/bucket 21.3"-Overall depth 39.9"-Number of teeth 14-Space between tines 5.5"-Cylinder Bore 2.0"/Stroke 8.375"-Cylind...See More Details

V50 Medium Duty Snow Light Material Bucket: Overall width 97.5"/inside 95.3"-Overall height 29.8"-Overall depth 40.6"/Inside 39.9"-Window height 8"-Bucket capacity Struck 35.5"/Heaped (cu ft) 42.6"...See More Details

V50 Skeleton Rock Bucket: Width 74.3"-Weight 630#-2.9" Tine spacing-Depth 42.9"-Height 21.5" Greater than 1500# loader operating capacity. Every tine is constructed of one piece of 3/8" Grade 80 st...See More Details