建設用付属装置 販売用 From HH Fabrication and Repair - Winsted, Minnesota

•20” bucket with four teeth •Grease-able heavy duty pins •Requires a minimum 65 HP •Equipped with a 3” x 16” hydraulic cylinder, hoses and couplers •Bucket wall is ¼” plate steel; bottom is ½” ...See More Details

•Includes three replaceable ripper teeth •Ripper teeth are 6” long •Reinforced heavy duty universal mounting brackets •Half moon plasma cut end plates made from ½” plate steel •Ideal for roots,...See More Details

Great for rocks, stumps or trenches. •Includes three replaceable ripper teeth •Ripper teeth are 6” long •Constructed of two sleeved 24” conus tines •Single hydraulic cylinder •Reinforced hea...See More Details

•The Brush Devil mower cuts small trees, brush and grass •Complete with heavy duty gear box •Powered by Parker motor •Torque at 3000 PSI •Requires 15 to 21 GPM /li> •Replaceable heat-treat...See More Details

•Bucket constructed of 3/16" plate steel with ¾” x 6” cutting edge •Single 2” x 8” hydraulic cylinder •Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra stren...See More Details

•Bucket constructed of ¼” plate steel with ¾” x 6” cutting edge •Heavy duty grapples made from ½” plate steel •Reinforced heavy duty universal mounting brackets; gusseted top and bottom for ext...See More Details

Claw Bucket Grapple 84" and 96" standard sizes. Five removable 32" forged curved tines with sleeves. Complete with cylinder, hoses and flat faced couplers. Weld on cutting edge 3/4" x 6" or bolt o...See More Details

• Constructed of 1/4" plate steel • Heavy duty universal mounting brackets • Ideal for ANY mason work

*Low profile ¾” x 6” cutting edge, available with weld on or bolt on cutting edge. •Constructed of ¼” plate steel with ¾” x 6” Cutting Edge weld on (bolt on options also available) •½” x 4” wear ...See More Details

• Constructed of 3/16” plate steel • Mounts forks up to 2.5” thick by 7” wide • 1/2” x 6” Cutting Edge • Includes 1” retaining pins • Works with most forklifts and telehandlers

Hydraulic Tree and Root Puller •3" x 8" hydraulic cylinder and hoses •Flat faced couplers included •3000 PSI recommended •Heavy duty frame •Reinforced heavy duty universal mounting brackets ...See More Details

• Tines are constructed of 1 7/8” round stress shaft sleeved and pinned • Heavy duty grapples made from 1/2” plate steel • Two 2”x 8” hydraulic cylinders • Reinforced heavy duty universal mount...See More Details

•Constructed of heavy duty 3” x 3” x ¼” steel frame •Four 32” German tempered (SHW) steel conus tines on the bottom •Spears are guaranteed for one year •Heavy duty universal mounting brackets. T...See More Details

Standard size 78". Constructed from two 3/4" x 6" hardened cutting edges one in front and one in the back of the leveling bar. Frame constructed with 2" x 4" and 2" x 2" tubing A 2-1/2 x 2-1/2" x...See More Details

•Heavy duty frame •32” Tines are sleeved and constructed of 1 ½” square stress shaft •Tines tapered for easy penetration •Reinforced heavy duty universal mounting brackets; gusseted top and b...See More Details

•Heavy duty frame •32” Tines are sleeved and constructed of 1 ½” square stress shaft •Tines tapered for easy penetration •Reinforced heavy duty universal mounting brackets; gusseted top and bo...See More Details

• Heavy duty frame • 32” Tines are sleeved and constructed of 1 1/2” square stress shaft • Tines tapered for easy penetration making it ideal for packed material • Reinforced heavy duty univers...See More Details

•Forks are 1 3/8” thick x 4” wide and 48” long •Frames are 47” wide •Forks are adjustable •Slide rail forks are 1 ¼” x 47” • Heavy duty 5,500 pound capacity per fork •Reinforced heavy duty un...See More Details

Runs off skid steer hydraulics.. Requires a minimum of 16 gallons per minutes Maximum of 30 gallons per minute Creates 20 to 40 horse-power off the power take off No need to modify power tak...See More Details

•Frame constructed of ¼” 2”x 2” Square Tubing •Includes two receiver tubes •Pin type drawer bar on the bottom •Tri-ball hitch in top receiver (sizes 1 7/8”, 2” and 2 5/16”) •Reinforced heavy...See More Details

• Red Conus Tine Curved Grapple • Grapple consists of four 24” curved conus tines • Single 2”x 8” hydraulic cylinder • Complete with cylinder, hoses and flat faced couplers with built in orific...See More Details

•Constructed of 1” solid plate steel Grade 50 with plasma cut teeth in plate •Rods are 7/8” solid rod placed 3 ½” on center which gives a 2 ¾” spacing between rods •Welded to a heavy 3”x 4” x 3/8...See More Details

* Standard sizes 58 ", 70" or 80"(58" also available in a single grapple) • Constructed of 1” solid plate steel with plasma cut teeth in plate • Rods are 7/8” solid rod placed 3 ½” on center whi...See More Details

•Constructed of ½” plate steel with two 1 ½” solid shafts running through the bottom •½” Gussets welded in for extra strength •Heavy duty grapples made from ½” plate steel •Two 2”x 8” hydraul...See More Details

•Constructed of heavy duty 3” x 3” x ¼” steel frame •Two 49” German tempered (SHW) steel conus tines on the bottom •Spears are guaranteed for one year •Heavy duty universal mounting brackets. Tr...See More Details