2016 CATERPILLAR 335F LCR

2016

CATERPILLAR

335F LCR

5,100

KNE00478

正確/確かめ

中古

Very Good Work Ready Cat 335F LCR - Great Value! Cat Coupler Tool Control Hydraulics 48” Bucket - good teeth Carbody good Paint and tinware good Operator station is good Lights and gauges and switches in operating condition SPECIFICATIONS Engine Net Flywheel Power 200 HP Bore 4.13 in Stroke 5.31 in Displacement 428 in³ Engine RPM 1800 r/min Weights Operating Weight 83820 lb Maximum Operating Weight** 83820 lb Minimum Operating Weight* 76037 lb Service Refill Capacities Fuel Tank Capacity 101.7 gal (US) Cooling System 7.9 gal (US) Engine Oil 6.3 gal (US) Final Drive - Each 2.1 gal (US) DEF Tank 6.1 gal (US) Hydraulic System Oil - Including Tank 76.6 gal (US) Hydraulic Tank Oil 40.7 gal (US) Swing Drive - Each 2.4 gal (US) Swing Mechanism Swing Speed 9.9 r/min Swing Torque 60628 ft·lbf Drive Maximum Drawbar Pull 66319 lbf Hydraulic System Main System - Maximum Flow - Total 130.5 gal/min Maximum Pressure - Equipment - Normal 5076 psi Maximum Pressure - Heavy Lift 5511 psi Maximum Pressure - Swing 3974 psi Maximum Pressure - Travel 5366 psi Pilot System - Maximum Flow 7.9 gal/min Pilot System - Maximum Pressure 595 psi Main System - Implement × 2 pumps 65.1 gal/min Dimensions - Boom - 6.15 m (20'2"); R3.2CB2 (10'6") Stick Cab Height* 10.7 ft Counterweight Clearance** 3.94 ft Ground Clearance** 1.57 ft Length - Center of Rollers 13.25 ft Shipping Height* 11.61 ft Shipping Length 32.22 ft Tail Swing Radius 6.23 ft Track Gauge 8.5 ft Track Length 16.47 ft Transport Width - 600 mm (24 in) Shoes 10.47 ft Transport Width - 700 mm (28 in) Shoes 10.79 ft Transport Width - 850 mm (33 in) Shoes 11.29 ft Working Ranges - Boom - 6.15 m (20'2"); R3.2CB2 (10'6") Stick Maximum Cut Depth 22.41 ft Maximum Cutting Height 36.58 ft Maximum Depth Cut for 2440 mm (8'0") Level Bottom 22.41 ft Maximum Digging Depth 22.93 ft Maximum Loading Height 26.15 ft Maximum Reach - Ground Level 34.91 ft Maximum Vertical Wall Digging Depth 18.93 ft Minimum Loading Height 9.58 ft Using a Tier 4-Final Cat C7.1 engine rated at 192 horsepower, the Cat 335F L CR excavator delivers a 16 percent improvement in fuel efficiency, compared with the 328D model it replaces. The compact-radius machine is made for heavy work on congested job sites, says Caterpillar, and when equipped with 33-inch track shoes, the 335F L CR limits over-the-side tail swing to 7 inches; a heavy counterweight is used to enhance overall stability and to provides lift capacities to 41,500 pounds. According to the company, the inherent fuel efficiency of the C7.1 is further enhanced with an automatic engine speed control (lowers engine rpm during no-load/light-load conditions), an engine idle shutdown system (stops the engine after a pre-set idling interval), and an ECO mode that allows operators to tailor machine performance to the application. The engine also runs efficiently on bio-diesel blends up to B20.

1

121.92 cm

はい

はい

はい

はい

Long

標準

1-Piece

Zero

はい

はい

固定

60

はい

はい

Good

はい

布

はい

Caterpillar