2 X JC JOYSTICKS + RADIO CONTROL SCANRECO FOR FORE PALMS KESLA FORESTRY EQUIPMENT WITH WALVOIL DPX 10

バルブ

2 X JC JOYSTICKS + RADIO CONTROL SCANRECO FOR FORE

PALMS KESLA FORESTRY EQUIPMENT WITH WALVOIL DPX 10

新品

Hydraulic Valve Walvoil DPX 100 12/24V with 8 Proportional Sections, Open/Closed Center, and Additional Levers. The valve includes a post-compensation section. Scanreco G3 Canbus system equipped with two JP Joysticks 12/24V. This kit is configured for the most popular machine settings, supporting up to 8 standard forest crane functions. If you require a different dedicated configuration, we can customize it to meet your needs, including variations in spools, voltage, the number of sections, anti-shock valves, connectors, etc. The relief valve can also be adjusted as required. Spool type and flow can be individually selected to suit your application. Please send us a diagram, and we can assist further. The kit is designed for plug-and-play convenience. We handle everything from the plugs to the software configuration. We provide technical support and are readily available via email, whatsup and telephone. Feel free to contact us at shop@ or damian@ for any inquiries or assistance. After placing an order, the flow and pressure can be fully adapted to the machine according to the customer's specific requirements. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Hydraulic, sectional valve Walvoil DPX 100 with compensation, full proportional Technical specifications of default configuration: Inlet section: 32GPM 120l/min - Pmax 300 bar 4351psi Power supply port: 3/4" BPS, tank return port: 3/4" BPS 1st Main Boom 60l/min 16GPM Anti shock valves 190/80 bar 2755/1305psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever 2nd Boom 60 l/min 16GPM Anti Shock valves 190/220 bar 2755/3190psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever 3rd Slewing 40 l/min 10GPM Anti Shock valves 200/200 bar 2900/2900psi A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever 4th Extension 80l/min 21GPM Anti Shock valve 140 bar/plugged bar 2030psi side A 4/3 center; A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever 5th Rotator 20 l/min 5GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever 6th Grapple 60 l/min 16GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever 7th Support Left Leg 20 l/min 5GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever; Spool: 20L/min; No Anti-shock valves 8th Support Right Leg 20/min 5GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever; Spool: 60L/min; No Anti-shock valves Outlet section: with the possibility of combining valves, with bleed valve (LS relief), with pressure reducing valve. Control connection "V" and drainage connection "L" closed. Side connections "T1", "P1", "LS1" closed. DBV fixed and sealed to 175 bar at 90L/min. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Scanreco G3 Canbus with JP Joysticks (description in photos) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Remote Radio Control Scanreco: -1–8 linear levers or 1–4 joysticks. » Various toggle switches, pushbuttons and rotary switches. - Operator feedback by: - LEDs (light emitting diodes) - Monochrome display 2.5" with 128 x64 px - Stop function in accordance with EN ISO 13849-1 cat. 3, PL d. - Cable control: Standard length 10 meters / ~33 ft - Frequency bands: 433–434, 902–928 MHz & 2.4 GHz (other frequencies available on request). - Operating range >100m / >~330 ft. - Operational temperature: –20°C to +70°C/ ~–4°F to +160°F. - Protection category: IP65. » Dimensions: (WxHxD): 350 x160 x190 mm / ~13.78 x6.30 x7.48 in (w/o color display). - Weight: 1.9–2.6 kg / ~4.2–5.7 lbs. including battery ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Technical Specifications: Power Supply Voltage : 10Vdc÷30Vdc (inner 5x20 8A fuse type F8A) Current absorpion : 300mA + load outputs (max 7.5A) Wroking Temperature Range : -20 ÷+ 70 C Supply for external poterntiometers: +5V - max current 50mA PWM minimum current range : from 100 to 2500 mA PweM maximum current range: from 100 to 2500mA PWM frequency : 50-60-70-85-100-125-150-200-250-300 Hz Analog inputs impedance: 11 KOhm towards 2.5V Overlall dimensions with connector mounted: 256x210x45mm Drill interasis : 242x142mm (n. 4 holes of 6mm diameter) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Technical Specifications: Power Supply Voltage : 10Vdc -30Vdc Max current absorpion : 200mA ON/OFF output load Wroking Temperature Range : -40°C + 70°C Thumbwhell and analog input signals : 0.5 4,5 V Abakig Uboyts Unoedabce: 11kOhm towards 2.5V Max ON/OFF autput current 700mA Push button power supply voltage: 5 VVdc stabilized, max 30 mA, schort circuit protected Infress Protection Rating : IP65 Connections: Molex minifit Jr 4p. (CAN and supply) + 10p. (aux inputs)