ACTUATOR BLOCK MOD 10 FOR 6 FUNCTION 12/24V

バルブ

ACTUATOR BLOCK MOD 10 FOR 6 FUNCTION 12/24V

新品

Technical specifications: Max flow: 70l/min 140l/min Pressure working: 210 bar in P 8 ÷ 25 bar in V 1 bar in L Default filtering: ISO4406 18/14 Fluid: 20-150cSt Body material: Aluminium Weight: 70l/min: 1,2Kg 140l/min: 2,3Kg Dimensions (mm) 70l/mn: 133x83x50 140l/min: 148x115x50 Power supply: 12V Max working pressure: 30 bar (435,1psi) Max thrust: 1300 N (at 30 bar= 435,1psi) MOD10 proportional servocontrols actuator block. Fluid type: Mineral oil 10 ÷ 200 cSt Max blow-by: 100 cc/minute PWM solenoids (voltage signal) Each module is made up of a hydraulic cylinder commanded by two proportional valves with mechanical feedback. There are two mechanical strokes to choose from: 13 mm and 20 mm. The MOD10 offers 3 section spacing options; please specify which one you choose when purchasing. The hydraulic bank MOD10 electrohydraulic system, when coupled with a manual hydraulic distributor, allows for remote control. The bank is made up of a manifold with mounted on as much sections (modules) as the movements to activate. All the modules are identical and they are fixed to the manifold with four screws stay. Each module works as standalone. The coupling of the hydraulic bank pistons to the manual distributor, already mounted on the machine, is done by brackets to screw on the dual control rods which have to be coupled with the forks mounted on each piston. It is possible to connect the forks to a different leverage system as long as is guaranteed, with right slots, an enough play to prevent stress in different direction than the axial one. The product has a high reliability. The installation of this block adds to a hydraulic valve the remote control, by cable or by radio. The specific design for the dual control rods allows its installation on any type of hydraulic mechanical valve. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ The hydraulic bank MOD10 electrohydraulic system, when coupled with a manual hydraulic distributor, allows for remote control. The bank is made up of a manifold with mounted on as much sections (modules) as the movements to activate. All the modules are identical and they are fixed to the manifold with four screws stay. Each module works as standalone. The coupling of the hydraulic bank pistons to the manual distributor, already mounted on the machine, is done by brackets to screw on the dual control rods which have to be coupled with the forks mounted on each piston. It is possible to connect the forks to a different leverage system as long as is guaranteed, with right slots, an enough play to prevent stress in different direction than the axial one. The product has a high reliability. The installation of this block adds to a hydraulic valve the remote control, by cable or by radio. The specific design for the dual control rods allows its installation on any type of hydraulic mechanical valve.