価格はお問い合わせください
Machine Location:2150 Eastern AveGallipolis, Ohio, アメリカ 45631(Opens in a new tab)
売主に関する情報
View Seller InformationGeneral
年式
2024
メーカー
PRO-HAUL
状態
新品
説明
FEATURES
All LED Lights
Hutch 9700 series three leaf spring suspension, 22,400 LB GAWR*
5” Round 22,500 or 25,000 LB axle with oil bath hubs
Two speed 50,000 LB lift capacity landing gear, 10 x 10 sand shoes
10 Hole Hub piloted wheels with 11R22.5 Tubeless Radial Tires
16-1/2 x 7 quick change brakes, Haldex ABS brake system*
30/30 brake chambers
Cable carrier system for air hose and electric harness protection
Tandem Slider on roller bearings
Bearings integrated in slider for easy repositioning of axles to reduce equipment damage
Tare weight approx. 6,500 LB
PRODUCT
Feature: New Chassis designed for the 21st century
Designed for repeated use in transportation of intermodal cargo containers
Meets DOT, AAR, ANSI, TOFC, FMVSS, ISO, SAE and TTMA requirements in effect at the time of manufacture in USA
Maximum Gross Weight: 54,000 LB • VIN Plate for Chassis: Standard US VIN Plate
Tare Weight: 6,500 LB
GEOMETRY
Overall Length & Type: 23’6” Closed 27’6” Extended, Gooseneck Frame
Frame Bogie Type: Sliding Tandem Bogie (2-Axle) with 22,500 or 25,000 LB Axles
Overall Frame Width: 96” over Bolster
Main Frame Width: 40”
Rear Height: Approximately 52” from ground to the top of the rear bolster in unladen condition
King Pin Location: 20” from front of chassis
Landing Gear Location: 57” from the rear of the front bolster
TIRES & WHEELS
Tires: Factory Furnished
Tire Manufacturer: Atlas*
Tire Size: 11R22.5
Wheels: Factory Furnished
Wheel Material: 8-Steel Wheels
Wheel Manufacturer: Butler*
Wheel Size: 8.25 x 22.5
Wheel Color: White
Valve Stem & Metal Dome Cap
UPPER COUPLER
Pick-Up Plate: 5/16” thick pick-up plate with 2” dia. Drain holes
King Pin Trans-Support: 5/16” (6.4mm) thick fabricated channel king pin Trans-support
King Pin: Standard (Buyers Product) King Pin*
LANDING GEAR
L/GEAR Shoes: 10” X 10” Sand Shoe Low Profile
L/Gear Ground Clearance: Approximately 12” Ground Clearance
Landing Gear: Butler 50,000LB lift/180,000LB Static with 2 Speed Gearbox*
Crank Handle: Located at Driver’s Side
FRAME
Main Beam: 12” Deep x 19 LB/ft main beam, A572GR50
G/N or FWD Beam Spec: 6” H Beam A572 GR50
Cross Member: Fabricated channel cross member with triangle gusset, A572GR50
Cross Member Thickness: 3/16”
L/G Support Bracket: 1/4” channel type bracket with 4” channel brace
Front Gusset Spec: Front Gusset with bending rib, 3/16” thick Triangular
Rear Gusset Spec: Rear Gusset with bending rib, 3/16” thick Triangular • Front Bolster Spec: 8” wide x 6 1/4” deep
Front Bolster Material: Channel 1/4”,Top Plate 3/8” (A572GR50)
Front Bolster Locking Device: Twistlock Type
Front Locking Spec: Non-retractable twistlocks, Butler 1101-1206*
Rear Bolster Spec: 8” wide x 7-1/8” deep
Rear Bolster Channel Material: 1/4” (A572GR50)
Rear Bolster Top Plate Material: 3/8” (A572GR50)
Rear Bolster Locking Device: Non-retractable twistlocks, Butler 1101-1206*
License Plate Bracket: Standard Install Location
Mudfl aps: 24” x 30” white factory furnished mudfl aps mounted on vertical steel fl ange with horizontal member
Rear Under Ride Bumper: Weld on Vertical steel flange with horizontal member
Horizontal Member: 4” C-channel horizontal step guard
Extendable Tandem Bogie: 4”x6” Rectangle Tube. Fitted with roller bearings for extending.
Extendable Frame Cross members: 1/4” A572GR50 Cross members
RUNNING/SUSP
Axle Spacing: 49” Axle Spacing
Axle ABS System: Tandem Axle with 2S1M ABS System
Bogie & Axle Location: 52” from rear of sliding tandem bogie
Susp. Spec: Hutchens Undermount Hanger, H-9700*
Spring Spec: 3 Leaf - 354-00
Axle Supplier: Butler*
Axle-General Spec: Axle - Tandem (2) Axle with 2S1M • Axle-Track Length: 71-1/2”
Axle-Wall Thickness: 5/8”
Axle Spindle: Tapered Spindle
Brake Lining: 16.5” x 7” Rockwell Q Type shoes • Brake Control System: 2S/1M Haldex ABS*
Air Tank: (2) 9.5x27 air tanks
Air Line: Black Gates Nylon DOT Tubing
Air Hose: Standard Hose Application
Slack Adjuster: Meritor Style Auto - 5.5”, 28 Spline*
Brake Chamber: TGI 30/30 Standard Stroke*
Brake Chamber Stroke Length: Standard Stroke Length
Brake Chamber Other Spec: Manufacturer’s Standard Components
10 Stud Hub Piloted Outboard Iron Hub with 16-1/2” x 7” cast steel brake drum
Bearing Specification: Set 413 HM212011 & HM212049 Cone/Cup Set 414 HM218210 & HM218248 Cone/Cup
Lubrication Spec: Shell Spirax 80w-90*
Wheel Seals: Stemco*
Hub Cap: Stemco metal 340-4009 oil type hubcap*
Gladhands: Velvac Gladhands, Service 035042 & Emergency 035045*
Gladhand Location: Located on mount plate at front of chassis
ELEC/AIR
Harness-Chassis: Molded Truck Lite 88 Series Harness*
7-Way Connector Pollack 7-Way without Circuit Breakers
Front Marker Lights: Trucklite 3050A LED Rivet or Grommet mounted, depending on inventory*
Rear Side Marker Lights: Trucklite 3050 LED Rivet or Grommet mounted, depending on inventory*
Rear Lights: (3) Trucklite 3050 LED Rivet or Grommet mounted, depending on inventory*
Rear Stop/Turn/Tail Lights: Trucklite 4050 LED Rivet or Grommet mounted, depending on inventory*
ABS Light: Trucklite 30200Y with 10728 Lamp Mounting Bracket & ABS Decal*
Hose Protection: Air Line and Electrical Harness enclosed in Igus Hose Carrier System to prevent damage from extending chassis.
License Light: Trucklite 15040 LED*
Registration Holder: (1) Trucklite 97960*
Decals Standard: Factory Furnished
Conspicuity Markings: Conspicuity Stripe per Federal Regulation
PAINT
Metal Preparation: Commercial Shot Blast
Primer: Zinc Phosphate Epoxy
Top Coat: Plural Component Acrylic Urethane
Paint Color: Black, unless otherwise requested
Chassis
タイヤ
11R22.5
後車軸数
タンデム
Weights & Dimensions
幅
243.84 cm