価格はお問い合わせください
Machine Location:2150 Eastern AveGallipolis, Ohio, アメリカ 45631(Opens in a new tab)
売主に関する情報
View Seller InformationGeneral
年式
2024
メーカー
PRO-HAUL
状態
新品
説明
FEATURES
All LED Lights
Grade 50, 14” I-BEAM construction with frame ribs for increased strength
GVWR 65,000 LB
18” Kingpin Setting
Hutch 9700 series three leaf spring suspension, 24,000 LB GAWR*
5” Round 25,000 LB axle with oil bath hubs
Two speed 50,000 LB lift capacity landing gear, 10 x 10 sand shoes
10 Hole Hub piloted wheels with 11R22.5 Tubeless Radial Tires
16-1/2 x 7 quick change brakes, Haldex ABS brake system*
30/30 brake chambers
Cable carrier system for air hose and electric harness protection
Tri-Axle Slider on roller bearings
Bearings integrated in slider for easy repositioning of axles to reduce equipment damage
Tare weight approx. 10,750 LB
PRODUCT
Feature: New Chassis designed for the 21st century
Designed for repeated use in transportation of intermodal cargo containers
Meets DOT, AAR, ANSI, TOFC, FMVSS, ISO, SAE and TTMA requirements in effect at the time of manufacture in USA
Maximum Gross Weight: 65,000 LB • VIN Plate for Chassis: Standard US VIN Plate
Tare Weight: 10,750 LB
GEOMETRY
Overall Length & Type: 33’5” Closed Position, 41’5” Extended Postion
Frame Bogie Type: With Sliding Triaxle Bogie (3-Axle) 25,000 LB Axles
Overall Frame Width: 96” over Bolster
Main Frame Width: 43”
Rear Height: Approxiamtely 52” from ground to the top of the rear bolster in unladen condition
King Pin Location: 20” from front of chassis
Landing Gear Location: 110” from front of chassis
TIRES & WHEELS
Tires: Factory Furnished
Tire Manufacturer: Atlas Tire*
Tire Size: 11R 22.5
Wheels: Factory Furnished
Wheel Material: 12 Steel Wheels
Wheel Manufacturer: Butler*
Wheel Size: 8.25 x 22.5
Wheel Color: White
Valve Stem & Metal Dome Cap
UPPER COUPLER
Pick-Up Plate: 5/16” thick pick-up plate with 2” dia. Drain holes
King Pin Trans-Support: 5/16” (6.4mm) thick fabricated channel king pin Trans-support
King Pin: Standard (Buyers Product) King Pin*
LANDING GEAR
L/GEAR Shoes: 10” X 10” Sand Shoe Low Profile
L/Gear Ground Clearance: Approximately 12” Ground Clearance
Landing Gear: Butler 50,000LB lift/180,000LB Static with 2 Speed Gearbox*
Crank Handle: Located at Driver’s Side
FRAME
Main Beam: 14” Deep x 34 LB/ft main beam, A572GR50
G/N or FWD Beam Spec: Neck 12” total beam height 3/8”x6” flanges A572 GR50
Cross Member: Fabricated channel cross member with triangle gusset, A572GR50
Cross Member Thickness: 3/16” with (2) 3” C-Channel X braces above sliding Triaxle bogie
L/G Support Bracket: 1/4” channel type bracket with 4” channel brace
Front Gusset Spec: 3/16” with bending rib located on fore and aft of bolster
Rear Gusset Spec: 3/16” with bending rib
Front Bolster Spec: 8” wide x 7-3/8” deep
Front Bolster Material: Channel 1/4”,Top Plate 3/8” (A572GR50)
Front Bolster Locking Device: Twistlock Type
Front Locking Spec: Non-retractable twistlocks, Butler 1101-1206*
Rear Bolster Spec: 8” wide x 7-3/8” deep
Rear Bolster Channel Material: 1/4” (A572GR50)
Rear Bolster Top Plate Material: 3/8” (A572GR50)
Rear Bolster Locking Device: Non-retractable twistlocks, Butler 1101-1206*
License Plate Bracket Install: Standard Install Location
Mudfl aps: 24” x 30” white factory furnished mudfl aps mounted on vertical steel fl ange with horizontal member
Rear Under Ride Bumper: Weld on Vertical steel flange with horizontal member
Horizontal Member: 4” C-channel horizontal step guard
Extendable Triaxle Bogie: 6”x10” x 3/8” Wall Rectangle Tube. (A500-CGR50) Fitted with roller bearings to aid in extending.
Extendable Frame Cross members: 3/16” A572GR50 Cross members with 1/4”x2” Flatbar X braces above all axles
RUNNING/SUSP
Axle Spacing: 53-5” Axle Spacing
Axle ABS System: Triaxle Axle with 2S1M ABS System
Bogie & Axle Location: Equalizers located at 56.5” and 110” from rear of sliding Triaxle bogie
Susp. Spec: Hutchens Undermount Hanger, H-9700*
Spring Spec: 3 Leaf - 365-00 Heavy Duty Spring
Axle Supplier: Butler*
Axle-General Spec: Axle - Triaxle (3) Axle with 2S1M • Axle-Track Length: 77-1/2”
Axle-Wall Thickness: 5/8”
Axle Spindle: Tapered Spindle
Brake Lining: 16.5” x 7” Rockwell Q Type shoes 20’
Brake Control System: 2S/1M Haldex ABS*
Air Tank: (3) 9.5x27 air tanks
Air Line: Black Gates Nylon DOT Tubing • Air Hose: Standard Hose Application
Slack Adjuster: Meritor Style Auto - 5.5”, 28 Spline*
Brake Chamber: TGI 30/30 Standard Stroke
Brake Chamber Stroke Length: Standard Stroke Length
Brake Chamber Other Spec: Manufacturer’s Standard Components
10 Stud Hub Piloted Outboard Iron Hub with 16-1/2” x 7” cast steel brake drum
Bearing Specification: Set 413 HM212011 & HM212049 Cone/Cup Set 414 HM218210 & HM218248 Cone/Cup
Lubrication Spec: Shell Spirax 80w-90*
Wheel Seals: Stemco*
Hubcap: Stemco metal 340-4009 oil type hub cap*
Gladhands: Velvac Gladhands, Service 035042 & Emergency 035045*
Gladhand Location: Located on mount plate at front of chassis
ELEC/AIR
Harness-Chassis: Molded Truck Lite 88 Series Harness*
7-Way Connector Pollack 7-Way without Circuit Breakers
Front Marker Lights: Trucklite 3050A LED Rivet or Grommet mounted, depending on inventory*
Mid-Marker Lights: Trucklite 3050A LED Rivet or Grommet mounted, depending on inventory/Trucklite 6050A MidTurn With TL 99152 WIDE TURN LENS*
Rear Side Marker Lights: Trucklite 3050 LED Rivet or Grommet mounted, depending on inventory*
Rear Lights: (3) Trucklite 3050 LED Rivet Mounting Rear Stop/Turn/Tail Lights: Trucklite 4050 LED Rivet or Grommet mounted, depending on inventory*
ABS Light: Trucklite 30200Y with 10728 Lamp Mounting Bracket & ABS Decal*
Hose Protection: Air Line and Electrical Harness enclosed in Igus Hose Carrier system to prevent damage from extending chassis
License Light: Trucklite 15040 LED*
Registration Holder: (1) Trucklite 97960*
Decals Standard: Factory Furnished
Conspicuity Markings: Conspicuity Stripe per Federal Regulation
PAINT
Metal Preparation: Commercial Shot Blast
Primer: Zinc Phosphate Epoxy
Top Coat: Plural Component Acrylic Urethane
Paint Color: Black, unless otherwise requested
Chassis
タイヤ
11R 22.5
後車軸数
3