2023 IROCK ITC300 Used 岩石骨材破砕設備2023 IROCK ITC300 Used 岩石骨材破砕設備
    2023 IROCK ITC300 Used 岩石骨材破砕設備2023 IROCK ITC300 Used 岩石骨材破砕設備
    2023 IROCK ITC300 Used 岩石骨材破砕設備2023 IROCK ITC300 Used 岩石骨材破砕設備
    Photos(3)

    2023 IROCK ITC300

    岩石骨材破砕設備
    価格はお問い合わせください 
    Rental Prices:
    Monthly: JPY ¥5,494,942
    (入力された価格 USD $35,000)
    Lease Prices:
    Call For Availability

    売主に関する情報

    View Seller Information

    Maxim Equipment

    お問い合わせ先:Joe Jensen

    電話番号:+1 209-781-4068

    Ripon, California, アメリカ 95366

    visit our website (Opens in a new tab)

    Rental Contact Information

    Maxim Equipment

    お問い合わせ先:Joe Jensen

    電話番号:+1 209-781-4068

    Ripon, California, アメリカ 95366

    visit our website (Opens in a new tab)

    General

    年式
    2023
    メーカー
    IROCK
    時間
    491
    モデル
    ITC300
    シリアル番号
    710022
    状態
    中古
    ストック番号
    230801 CC12
    説明
    CRUSHING CHAMBER… • Metso MC300 Cone Crusher • Feed opening: 41” (1050mm) • Crusher input speed: 750 - 950 rpm • Crusher Drive: Direct drive • Closed side setting adjustment: Hydraulic • Level sensor: Ultrasonic • Throw: 3.3” (84 mm) at discharge with new liners • Power required: 300 Hp FEEDER… • Feeder opening width: 41” (1050 mm) • Feeder drum crs.: 19’ – 8.2” (6.0 m) • Drive: Hydraulic • Feeder belt width: 48” (1200 mm) • Motor: Danfoss OMSS 125 • Gearbox: Bonfig 809 W2 24.2:1 • Flow rate: 33.8 GPM (128 LPM) • Adjustable speed: Yes • Maximum speed: 42 rpm HOPPER… • Length: 12’ – 4.9” (3.78 m) • Width: 7’ – 2” (2.2 m) • Volume: 6.5 yd3 (5 m3) levelled off, 8.1 yd3 (6.2 m3) heaped • Material: ¼” sides + 3/8” Hardox® liners MAIN CONVEYOR… • Stockpile height: 12’ – 9” (3.887 m) • Belt width: 48” (1200 mm) • Belt spec: Plain 500/3 8+2 • Drive drum dia.: 13.7” (350 mm) • Tail drum dia.: 10.6” (270 mm) • Motor: OMV800 • Flow rate: 23.7 GPM (89.6 LPM) • Maximum speed: 112 rpm • Angle adjustable: YES • Quick release: YES POWERUNIT AND HYDRAULICS • Engine: CAT C13B TIER 4F/STAGE V • Engine power: 536HP • Cone drive clutch: PT-tech HPTO14TF1 • Flywheel Pump 1 (Tracks/Feeder): Kawasaki K3VL80 • Flywheel Pump 2 (Tracks/Main conveyor): Kawasaki K3VL80: • LH PTO Pump 3 (Auxiliary/Lube/pilot): Turolla 29/29/10 • Total system flow (max): 88.5 GPM (335 LPM) • Hydraulic tank capacity: 211 gal (800 L)· ELECTRICS… Emergency stops: 4 off, 2 feeder, 2 power unit Chassis cabling: Armored cable Start Siren: YES – 10 sec delay Control panel: Tedd Engineering / IFM Engine shutdowns: · Low oil pressure · High water temp · Air filter blockage (selectable) · Fuel contamination · Low hydraulic tank level · Low lube oil flow · Low lube oil pressure · High lube oil temperature · High hydraulic oil temperature Radio control tracks and feeder: STANDARD Pendant track control: YES – plugged in control cabinet TRACKS… • Width: 15.7” (400 mm) • Length: 13’ – 5.4” (4.1 m) crs • Height: 32” (817 mm) • Gearbox: Bonfiglioli 711 • Ratio: 144:1 • Motor: Rexroth A2FE90 • Speed max: 0.93 mph (1.50 kph) • Flow rate: 40.2 GPM (152 LPM) • Multiple speeds:Three speed system selectable at control panel with smooth start/stop SAFETY FEATURES… • External belt alignment points • External grease points • Engine safety shutdown systems • Full safety guarding for nip points