JPY ¥848,679
Machine Location:2100 E. Lincoln WayAmes, Iowa, アメリカ 50010(Opens in a new tab)
売主に関する情報
View Seller InformationStar Equipment Ltd
お問い合わせ先:Ben Hammann
電話番号:+1 515-505-7233
Des Moines, Iowa, アメリカ 50314
General
年式
2022
メーカー
EDCO
モデル
2ECNG1.5
シリアル番号
211210202
状態
中古
ストック番号
210202
説明
2022 EDCO 2EC-NG
Electric Floor Grinder
115 V | 1.5hp Motor | Single Phase
Floor Grinders solve first layer applications like smoothing concrete, preparing floors for new coverings and removing thinner coatings, soft materials and ice.
PRODUCTION RATE: 21.5” working width will grind approximately 400-500 Sq. ft. per hour at 1/32” depth with diamond tooling.
GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s Magna-Trap® Slide-On Tooling.
GRIND LEVEL: Using EDCO’s exclusive Leveling System you can adjust the machine’s height, use a wide range of tooling, and truly grind level. Level grinding is quicker, smoother, easier on the operator, and increases tooling life.
VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the tooling being used.
Laser-Cut Weight Tray: This built-in weight tray accepts up to 80lbs. of extra weight!
Multi-Vac port for use with 2? or 3? vacuum hose.
Counter-rotating discs prevent machine from pulling side to side and give operator greater control.
6 grinding tools required per loading.
IDEAL FOR:
Production grinding and floor cleaning in large and small areas: airports, parking decks, sports arenas, manufacturing plants.
Light cleaning or grinding of concrete surfaces.
Removing mastics, thin-set, epoxies and urethanes.
Leveling high spots or surface imperfections.
Lightly texturing slippery concrete surfaces.