2019 PALFINGER PK11.001 SLD 1

2019

PALFINGER

PK11.001 SLD 1

中古

C-AC1

Palfinger PK11.001 SLD 3 Hydraulic Loader equipped as follows: - Mounted behind cab - Maximum lifting moment 74,780 ft/lbs - 2-section hydraulic boom extension to 25’6” - Manually extendable outriggers with a spread of 16’0” - Paltronic Overload Protection System - Single linkage at outer boom - Rotation angle 400 degrees - 4-function Danfoss control valve - Dual operator control stations - Bubble level at both outrigger control stations - Load holding valves on main, outer and extension cylinders - Return oil utilization - Oil tank 17.2 US gallons mounted at crane base with return filter - Two composite outrigger pads with storage brackets - 180 degree stable over rear 12’ Alum-line body equipped as follows: - 12’ flatbed - 3” extruded aluminum I-beam crossmembers on 12” centers - Extruded aluminum perimeter bed rail – ½” thing - Upgraded to 1-1/4” extruded floor - In-frame storage box 10’ between frame truck rails with rear doors - 3” x 3/8” rub rail and 2/4 stake pockets - 6” deep rear diamond plate step bumper - 20” deep side skirt, 0.125” diamond plate material - Underbody alum. Diamond plate toolboxes: 60”L x 20”H x 24”D – 1 each side 2019 International 4300 SBA 4x2 chassis equipped as follows: - 25,500 GVW - Cummins B6.7 engine – 250 hp @ 2400 rpm, 660 lb-ft at 1600 rpm - Engine block heater - Allison automatic transmission - Hydraulic brakes - 50 gallon fuel tank - Gear ratio 3.36 - Rear suspension – single spring 18,500# with 4500# aux rubber spring - Driver’s seat – air suspension, high back, vinyl - Passenger’s seat – non suspension, high back, vinyl - Steel wheels – 19.5x6.75 - Tires – 245/70R19.5

2019

INTERNATIONAL

DURASTAR 4300

Cummins

ディーゼル

オートマティック

189.27 L

65.11 L

Behind Cab

101,388.07 Nm

7.77 m

400 °