価格はお問い合わせください
Machine Location:302 South Clark St.Pella, Iowa, アメリカ 50219(Opens in a new tab)
売主に関する情報
View Seller InformationGeneral
年式
2024
メーカー
TYM
モデル
T474H
状態
新品
時間
1
説明
2024 TYM T474H TRACTOR
***OUT OF STOCK***
CALL FOR ADDITIONAL INFORMATION!!
4-cyclinder TYM diesel engine with high output: Equipped with a powerful, Tier-4 certified 4-cylinder engine, this tractor has an output comparable to utility tractors while maintaining the dimensions of a sub-compact tractor. The durable body and efficient engine come together to perform medium-duty applications efficiently and productively.
External lever to adjust rear implements: In addition to the in-cabin controls, this tractor has an external position lever near the 3-point hitch. This allows operators to adjust an implement position as soon as it is connected, without needing to go to the cabin. This enables quick and convenient switching between implements, enhancing tractor versatility.
Controls to speed up, slow down, raise or lower implements: Even while the tractor is in motion, a dedicated PTO lever can be used to speed up or slow down implement rpm, while the dial can raise and lower implements at the prescribed speed.
Easy to open hood for convenient maintenance: The tractor hood can be opened in one motion, providing easy access to the engine and other systems for daily checks, routine service and maintenance. The side panel can also be removed easily without the need for specialized tools.
3-point hitch with powerful lift capacity: The 3-point linkage on the rear has an impressive lift capacity that reaches the end ball joints. The rear PTO control can be used to adjust rpm based on the task, increasing it for more intensive applications like slashing and digging.
High capacity fuel tank to support time intensive work: The high capacity fuel tank allows drivers to take on jobs for longer periods without stopping for fuel. This is in addition to the engine, which promotes fuel-efficient operation and increases the time before a refuel.
ENGINE
Engine manufacturer: TYM A2300N2
Type: Natural Aspiration
Gross engine power: 48.3 hp | 36 kW
PTO power: 35.9 hp | 26.4 kW
Rated engine speed: 2600 rpm
No. of cylinders: 4
Displacement: 139.5 cu. in.
Air cleaner: Single Dry
Alternator: 12V, 70A
Fuel system: IDI
POWERTRAIN
Transmission type: Mechanical
No. of speeds: F12xR12
Max. traveling speed: 14.9 mph
Brakes: Wet Disc
Steering: Hydrostatic
Clutch: Dry Single Plate
HYDRAULIC SYSTEM
Pump type: Dual Gear Pump
Implement flow: 7.66 gpm
Steering flow: 4.25 gpm
Total flow: 11.91 gpm
Category, 3-point hitch: I
Hitch lift capacity: 2688.8 lb
Hitch lift capacity at 24 inches behind link ends: 1508.4 lb
Lift control type: Position
No. of standard remote valves: 1
PTO
PTO type: Independent
PTO control: Electric/Hydro
PTO rear: 540 rpm
CAPACITIES
Fuel tank: 9.0 gal.
Coolant: 6.9 qt.
Crankcase: 6.8 qt.
Transmission/Hydraulics system: 8.5 gal.
Front axle: 8.6 qt.
DIMENSIONS & WEIGHTS
Overall length with 3-point hitch: 131 in.
Overall width: 54.5 in.
Wheelbase: 69.7 in.
Height to top of ROPS: 94.5 in.
Min. ground clearance: 12.8 in.
Min. turn radius with brakes: 106.7 in.
Min. turn radius without brakes: 117.5 in.
Weight with ROPS: 3289 lb
Weight with cab: 3607 lb
STANDARD TIRES
R1 Agricultural - Front: Farm Specialist 7-16 NHS TL 6PR
R1 Agricultural - Rear: Farm Specialist 11.2-24 NHS TL 6PR
R3 Turf - Front: Multi-Trac CS 27x8.50-15 NHS TL 4PR
R3 Turf - Rear: Multi-Trac CS 41x14.00-20 NHS TL 4PR
R4 Industrial - Front: Trac Chief 10-16.50 NHS TL 6PR
R4 Industrial - Rear: Xtra Grip 43x16.00-20 NHS TL 6PR
動作条件
動作可能
付属装置
Loader
はい
Loader Make
TYM
Three Point Hitch
はい
Chassis
Tires or Tracks
Tires
Front Tire Type
Singles
Rear Tire Type
Singles
Wheelbase
177.04 cm
Exterior
ROPS
はい
Hydraulics
Mid Mount Hydraulics
はい
Powertrain
馬力
36.02 kW
パワーテイクオフ馬力
26.77 kW
駆動
MFWD
Transmission Type
Mechanical Shuttle
Forward Speed
12
Reverse Speed
12
Travel Speed
23.98 km/h
HasPTO
はい
PTO
540
エンジン
エンジンメーカー
TYM
燃料の種類
ディーゼル
燃料容量
34.07 L