2019 CATERPILLAR 980M

2019

CATERPILLAR

980M

7,740

中古

3125

L4593

ECM IDLE HOURS: 3125, LOAD FACTOR: 14%, CAT C13 ACERT Engine, Block Heater, Powershift Transmission, Cab (ROPS) with A/C, Joystick Steering, Ride Control, Aggregate Arrangement, CAT Payload System, Autodig Function, Bridgestone VSNT L4 29.5R25 Tires, NEW L5 Tire Option Available, CAT 7.75 CYD GP Bucket, CAT 7.5 CYD Spade Nose Bucket Available, Rear View Camera, Axle Oil Coolers, Joystick Bucket Control, Powered Heated Rear View Mirror, Remote Door Opener, Halogen Flood Light Arrangement, Rated at 425 HP, Weight 67,000 LBS. Repair/Condition Report: The following are repairs completed by the CAT dealer prior to Marcel Equipment owning the machine; At 792 hours, installed NEW seat air compressor At 891 hours, performed 500 hour service At 1,976 hours, performed 2,000 hour service At 2,494 hours, performed 500 hour service At 2,903 hours, performed 3,000 hour service At 3,378 hours, performed 500 hour service At 3,985 hours, performed 2,000 hour service At 4,412 hours, performed 500 hour service At 4,861 hours, performed 5,000 hour service At 5,429 hours, performed 500 hour service The following was completed by Marcel Equipment; Upon arrival to our yard, machine was stripped for power washing Machine was inspected visually & operationally Engine oil filter was cut open - clean Transmission filter was cut open - clean Hydraulic filter was cut open - clean Axle oils were checked - levels good & oils clean The following pressures were taken to endure within OEM spec; Engine oil Fuel Engine boost Full stall & double stall Transmission main Torque convertor inlet & outlet Transmission lube Transmission lock-up Steering Main hydraulic Pilot Brake cut-in & cut-out Brake accumulator Ride control accumulator Fan min & max speeds The following repairs were completed by Marcel Equipment; Line bored front & rear steering cylinder mounting bores Installed NEW pins & bearings on steering cylinders Cleaned & inspected HVAC system & installed NEW filters Installed NEW hydraulic tank vent filter Inspected cab & all switch functions REBUILT seat assembly Repaired window washers & installed NEW wipers Completed miscellaneous minor repairs on machine This unit is ready to go to work.

Enclosed

316.92 kW