USD $19,995
Machine Location:HighwayCedar Rapids, Iowa, アメリカ 52404(Opens in a new tab)
売主に関する情報
View Seller InformationStar Equipment Ltd
お問い合わせ先:Mitch McDonough
電話番号:+1 515-962-6967
Des Moines, Iowa, アメリカ 50314
General
年式
2021
メーカー
BARRETO
Hours
257
モデル
30SG
シリアル番号
SG3029
状態
中古
ストック番号
SG3029
説明
2021 Barreto 30SG
Track Stump Grinder
DESIGN - The 30SG stump grinder features a variant of the same time-tested track drive platform used by the RTK trencher series. The 30SG has a hydraulically-driven cutter wheel that is raised and lowered into the stump and then moved from side to side to cut down. The 30SG is powered by a 31hp Briggs & Stratton Vanguard V-Twin engine. The engine is coupled to two gear pumps: the larger gear pump drives the cutter wheel and the smaller pump works the tilt and swing cylinders. The tracks are driven by independent hydrostatic pumps mounted on the rear of the engine for easy access and simple linkage control. Counterbalance valves on each track drive prevent the track motors from slipping while the cutter wheel is engaged in the cutting process, even while operating on a slope.
CONTROLS - The cutter wheel operation and articulating arm are operated by controls mounted on the console. The cutter wheel is activated by a switch on the control stick and has a secondary safety switch to prevent accidental engagement. Back and forth movement across the stump, as well as depth of cut, are easily controlled by handles on the console, allowing for carefully controlled movement of the cutter wheel as it reduces the stump to chips.
ROI - All hydraulic drive to the cutter wheel eliminates costly belts. It also increases customer satisfaction by ensuring there is no loss of power because of a damaged belt or mechanical component. The track drive increases maneuverability around the job site, creating customer satisfaction by allowing them to get the job done with increased efficiency.
FEATURES:
Easy controls operate the track drive and cutter wheel.
Time-tested track design absorbs impact and provides stability.
Center-mounted cutter wheel provides 134º head swing.
Gear pumps coupled to the engine drive the cutter wheel, tilt, and swing.
Counterbalance valves on each track drive prevent motors from slipping.
Powertrain
馬力
23.12 kW