2024 ROME PG12

2024

ROME

PG12

Baru

Pull Grader For use with tractors in the 70 – 200hp plus range. * Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to implement. Width measured with the blade at 45° angle. Height measured with blade resting on ground. Blade ground clearance depends on blade angle and drawbar height. NOTE: This implement requires hydraulic control. Three rear tractor hydraulic circuits required for implement operation. The right and left blade swing circuit is equipped with a crossover relief valve factory preset at 1300 psi ± 50psi. Overall Dimensions: -Length: 17'7" (5.4 m) -Width: 8'8" (2.6 m) -Height: 3'7" (1.1m) Blade Length: 12'0" (3.7m) Ground Clearance: 12" (305mm) Suggested Engine HP: 90-150 Net Weight: 3,660 lbs (1,660 kgs) FEATURES: • Used to economically dress road shoulders; construct and maintain ditches, haul and field roads, terraces, and levees. • Laser adaptable to allow contractors to finish grade to exact specifications and farmers to precision level fields. • ROME sloper blade, heavy duty 3/4” (19mm) thick high strength steel with replaceable cutting edges and end bits. • Operator has hydraulic control of blade angle, blade tilt, and transport wheels from the tractor seat. • Hydraulically operated 45° blade angle front to rear or left to right, 18° blade tilt up and down. • Walking beam transport group with dual wheels. • Weight box allows extra weight to be added if desired. Standard Equipment: • Weight Box – PG-10 & PG-12: up to 3000lbs (1361kg). PG-16: up to 4000lbs (1814kg). • Hubs with slip in bolt on spindles – PG-10 & PG-12: six bolt. PG-16: eight bolt. • Offset walking beam transport unit. • Crossover relief valve. • Transport light group. Optional Equipment: • Box scraper group. • Laser mast assembly.