2024 ROME PG12 New Alat Pengeruk Tarik untuk dijual2024 ROME PG12 New Alat Pengeruk Tarik untuk dijual
    2024 ROME PG12 New Alat Pengeruk Tarik untuk dijual2024 ROME PG12 New Alat Pengeruk Tarik untuk dijual
    2024 ROME PG12 New Alat Pengeruk Tarik untuk dijual2024 ROME PG12 New Alat Pengeruk Tarik untuk dijual
    2024 ROME PG12 New Alat Pengeruk Tarik untuk dijual2024 ROME PG12 New Alat Pengeruk Tarik untuk dijual
    Photos(4)

    2024 ROME PG12

    Alat Pengeruk Tarik
    Hubungi untuk info harga 

    Informasi Penjual

    View Seller Information

    Rome Plow Company

    Kontak:Steve Ireland

    Cedartown, Georgia, AS 30125

    visit our website (Opens in a new tab)

    General

    Tahun
    2024
    Produsen
    ROME
    Model
    PG12
    Kondisi
    Baru
    Deskripsi
    Pull Grader For use with tractors in the 70 – 200hp plus range. * Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to implement. Width measured with the blade at 45° angle. Height measured with blade resting on ground. Blade ground clearance depends on blade angle and drawbar height. NOTE: This implement requires hydraulic control. Three rear tractor hydraulic circuits required for implement operation. The right and left blade swing circuit is equipped with a crossover relief valve factory preset at 1300 psi ± 50psi. Overall Dimensions: -Length: 17'7" (5.4 m) -Width: 8'8" (2.6 m) -Height: 3'7" (1.1m) Blade Length: 10'0" (3.1m) Ground Clearance: 12" (305mm) Suggested Engine HP: 70-130 Net Weight: 3,150 lbs (1,429 kgs) FEATURES: • Used to economically dress road shoulders; construct and maintain ditches, haul and field roads, terraces, and levees. • Laser adaptable to allow contractors to finish grade to exact specifications and farmers to precision level fields. • ROME sloper blade, heavy duty 3/4” (19mm) thick high strength steel with replaceable cutting edges and end bits. • Operator has hydraulic control of blade angle, blade tilt, and transport wheels from the tractor seat. • Hydraulically operated 45° blade angle front to rear or left to right, 18° blade tilt up and down. • Walking beam transport group with dual wheels. • Weight box allows extra weight to be added if desired. Standard Equipment: • Weight Box – PG-10 & PG-12: up to 3000lbs (1361kg). PG-16: up to 4000lbs (1814kg). • Hubs with slip in bolt on spindles – PG-10 & PG-12: six bolt. PG-16: eight bolt. • Offset walking beam transport unit. • Crossover relief valve. • Transport light group. Optional Equipment: • Box scraper group. • Laser mast assembly