2018 CATERPILLAR 963K

2018

CATERPILLAR

963K

5,574

CAT0963KHLBL00662

Bekas

Accurate / Verified

VERY GOOD CONDITION CATERPILLAR TRACK LOADER! THIS UNIT HAS UPDAYED PRODUCT LINK AND HAS BEEN DEALER MAINTAINED FROM DELIVERY SERVICE HISTORY IS AVAILABLE  3.1 CU. YD. BUCKET C/W TEETH MULTISHANK RIPPER VERY GOOD PAINT CONDITION  GLASS AND TINWARE VERY GOOD LIGHTS AND GAUGES FULLY OPERATIONAL OPERATOR STATION IN VERY GOOD CONDITION GOOD U/C - JOB READY SPECIFICATIONS Dimensions Ground Clearance - 1.55ft in Maximum Rollback/Dump - Fully Raised -  52 degrees/53 degrees Overall Machine Height - Bucket Fully Raised - 212.7in Overall Machine Length*. - 275.61in Overall Machine Width Without Bucket: With Standard Tracks - 550 Mm (21.6 In) Shoes. - 94.5in Ramp Angle - 29 degrees Reach At Full Lift Height And 45 Degrees Dump* - 54in *With General Purpose bucket and extra duty teeth. Bucket Height - Carry Position - 18in Carry Position Approach Angle - 15 degrees Clearance At Full Lift Height And 45 Degrees Dump* - 114.8in Digging Depth* - 5.4in Grading Angle - 63 degrees Machine Height - Top Of Cab - 130.9in Maximum Rollback - Ground/Carry Position - 43 degrees/50 degrees Height - Bucket Hinge Pin - 155.1in Height - Top Of Stack - 115.7in Undercarriage Track Gauge - 6.07ft in Track Shoe Width - Standard - 22in Ground Contact Area - Optional Shoe - 4013 square inches  Ground Contact Area - Standard Shoe - 4900 square inches Ground Pressure - Optional Shoe - 11 psi Ground Pressure - Standard Shoe - 9 psi Ground Pressure(1) - Optional Shoe - 11.1 psi Ground Pressure(1) - Standard Shoe - 9.1 psi Grouser Height - Double Grouser - 1.65in Track On Ground - 100in Track Rollers/Shoes - Each Side Track Shoe Width - Optional = 18in Note (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. Specifications Engine Emissions U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, equivalent to Tier 3/Stage IIIA Engine Model - Cat C7.1 ACERT Flywheel Power - 193hp Note (1) All nonroad Tier 4 Interim and Final, Stage IIIB and IV and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel blended with ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. Note (2) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Net Power - Iso 9249/Sae J1349 (Din) - 196hp Net Power - Iso 9249/Sae J1349 - 193hp Operational Operating Weight - 44138lb Weights Note (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. Operating Weight(1) - 44771lb Buckets Capacity - General Purpose - 3.1yd3 Width - General Purpose - 102.8in Refill Capacities Fuel Tank - 84.5gal Note (1) Machine equipped with Tier 4 Final/Stage IV emissions reduction technology. Def Tank(1) = 4.3gal Air Conditioning System Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes.

Ya

General Purpose

3 cu yd

Ya

Multi Shank

Ya

Ya

Ya

Ya

SALT

50

50

50

50

Enclosed

Ya

Ya

Ya

Good

Joystick

Ya

Ya

USA Tier 4 Final

Ya