2023 BOBCAT E26

2023

BOBCAT

E26

1

B4S915763

Baru

Accurate / Verified

3572

**EXTREME PRICE DROP** **Brand New 2023 Model Unit!** **This E26 qualifies for new 0% financing!!** **Taxes Apply** **Additional buckets apply** Performance: Operating weight (canopy, long arm, standard seat, heavy and add-on counterweight, rubber track, 20 inch trenching bucket, and 165 lb/75 kg operator): 6489 lb (2942 kg) Travel Speed (Low / High) 1.8 mph / 3.2 mph (2,9 km/h / 5,2 km/h) Boom Length 82.7 in (2100 mm) Arm Length 55.1 in (1400 mm) Tail Swing Overhang 3.5 in (89 mm) Digging Forces (per ISO 6015) Arm - 3547 lbf (15780 N) Bucket - 5652 lbf (25140 N) Controls Steering Two hand levers / foot pedals Hydraulics Two hand-operated joysticks control boom, bucket, arm and upper-structure slew Thumb switch controls auxiliary hydraulics and boom swing Blade Hand lever Two Speed Switch on blade lever Boom Swing Electric switches on joysticks Auxiliary Hydraulics Electric switches on joysticks Auxiliary Pressure Release Electric switch in right joystick Engine Engine speed control dial with auto idle feature, key or keyless start switch Starting Aid Glow Plugs - activated by start switch Engine Make / Model Kubota® D1305-E4B-BCZ-1 Tier 4 Fuel / Cooling Diesel / Liquid Horsepower: – Gross power (ISO 14396) – Gross power (SAE J1995) – Net power (SAE J1349) 24.4 hp (18,2 kW) 24.8 hp (18,5 kW) 23.7 hp (17,7 kW) Torque: – Gross torque (SAE J1995) – Net torque (SAE J1349) 60.0 lb-ft (81,3 N•m) 57.5 lb-ft (77,9 N•m) Number of Cylinders 3 Displacement 77.0 in³ (1,261 L) Bore / Stroke 3.07 x 3.46 in (78 x 88 mm) Lubrication Pressure System with Filter Crankcase Ventilation Closed breathing Air Cleaner Dual dry replacement paper cartridge with safety element Ignition Diesel - Compression Low Idle Speed 1250 ± 25 rpm High Idle Speed 2620 max rpm Engine Coolant Propylene Glycol / water mixture (53% PG / 47% water) Electrical Starting Aid Glow Plugs Alternator 12 volt, 65 Amp open frame w/ internal regulator Battery 12 volt - 500 CCA @ 0°F (-18°C) Starter 12 volt; gear reduction 2.7 hp (2,0 kW) Instrumentation Fuel level gauge, engine coolant temperature gauge, visual & audible warnings for engine & hydraulic malfunctions, and hour-meter with job clock Lights 20 watt (LED) Hydraulic System Pump Type Engine driven, dual outlet, variable displacement, load sensing, torque limited, piston pump with gear pumps Pump Capacity Piston Pump Gear Pump - 1 Gear Pump - 2 2 x 8.9 U.S. gpm (2 x 33,75 L/min) 5.3 U.S. gpm (20 L/min) 1.8 U.S. gpm (6,75 L/min) Auxiliary Flow 14.2 U.S. gpm (53,75 L/min) Hydraulic Filter Full flow replaceable, 3 micron synthetic media element Control Valve 10 spool, parallel series type, open center Fluid Type Bobcat Fluid, Hydraulic / Hydrostatic 6903117 - (2.5 U.S. gal) 6903118 - (5 U.S. gal) 6903119 - (55 U.S. gal) System Relief Pressure Slew relief pressure Blade, Boom Swing Boom, Arm, Bucket, Travel 2988 psi (20600 kPa) (206 bar) 2988 psi (20600 kPa) (206 bar) 3481 psi (24000 kPa) (240 bar) Joystick Control Pressure 464 psi (3200 kPa) (32 bar) Auxiliary Port Relief (1 and 2 if equipped) 2611 psi (18000 kPa) (180 bar) Arm Port Relief Base And Rod End 4206 psi (29000 kPa) (290 bar) Boom Port Relief Base And Rod End 4206 psi (29000 kPa) (290 bar) Bucket Port Relief Base And Rod End 3771 psi (26000 kPa) (260 bar) Blade Port Relief Base And Rod End 3916 psi (27000 kPa) (270 bar) Main Hydraulic Filter Bypass 49 psi (340 kPa) (3,4 bar) Case Drain 17 – 23 psi (120 kPa – 160 kPa) (1,2 – 1,6 bar) Drive System Final Drive Each track is driven by hydrostatic axial piston motor Drive Reduction 41,9:1 two stage planetary Gradeability 30° Drawbar Pull 6587 lbf (29300 N) Brakes Hydraulic lock on motor 6 Slew System Slew Drive Gear pump connected to a planetary drive Slew Circle Single row shear type ball bearings with internal gear Gear Reduction 159,5:1 (total), 21,5:1 (slew motor), 7,4:1 (slew bearing) Brake Spring applied, pressure released Slew Speed 9.3 rpm Undercarriage Crawler Track Design Sealed track rollers with boxed section track roller frame, grease type track adjuster with shock absorbing recoil spring Width of crawler 61.0 in (1550 mm) Capacities Fuel Tank 9.1 U.S. gal (34,4 L) Hydraulic Reservoir Only (Center of Sight Glass) 2.7 U.S. gal (10,2 L) Hydraulic System (with Reservoir) 6.1 U.S. gal (23 L) Cooling System with / without Heater 1.3 U.S. gal (4,8 L) / 1.2 U.S. gal (4,4 L) Engine Oil and Filter 5.04 U.S. qt (4,0 L) Final Drive (each) 0.77 U.S. qt (0,6 L) Tracks Type Rubber Width 11.8 in (300 mm) Number Of Shoes Single Assembly Number of Track Rollers (per side) 3 Ground Pressure 4.13 psi (28,4 kPa) Temperature Range Operation and storage -1.3° – +109.4°F (-17° – +43°C)

34.45 L

2,943.36 kg

Ya

1.4 m

2-Piece

2.1 m

Ya

Reduced

0.28 B

Ya

487.68 cm

3.29 m

2.9 m

Rubber

100

Open

Halogen

Vinyl

Tapak

2

5.15 km/h

18.49 kW

Kubota

D1305-E4B-BCZ-1

USA Tier 4

4.32 m

1.55 m

2.44 m

2,943.36 kg