SUPERIOR 7X16

SUPERIOR

7X16

1,158

1351804

Bekas

882

ON LEASE Hopper • Size-7' x 16' top opening • Construction-fabricated with 1/4" plate, reinforced around top and bottom • Hopper Extensions-20" tall extensions bolted to hopper • Capacity-8 cubic yards struck • Grizzly-Grizzly bars of triangular construction 3/4"x4" flats on top w/ 3/8"x4 flat side bars. -Adjustable with a minimum of 3 1/2" clear opening. (Factory set at 3 1/2") • Hydraulic Grizzly Raise-full vertical dump position • Bi-Directional Grizzly-includes tabs for user to switch grizzly pinning point to other side of plant • Flow gate-not included • Bottom opening-tapered bottom • Trough Liner-Not included • Hopper Liner-not included Belt feeder • Size-42" belt width • Frame-channel frame, removable from under hopper • Drive-Hydraulic drive • Backstop-Not included • Access Door-Tail end access door • Capacity-800 STPH max of 100 PCF material, 25° surcharge (90% fines, 10% lumps 8” minus) • Belt Speed-Variable via manual valve: Up to 100 FPM • Superior Idlers-CEMA D, 5" dia. Rolls, sealed for life ball bearings • Flat Carrier-7 1/2" spacing • Returns-Steel return rolls Discharge conveyor • Size-36" wide x 46' long • Frame-Heavy duty 12" formed channel • Drive-Hydraulic drive • Backstop-Hydraulic valve circuits limit belt rollback • Capacity-800 STPH max of 100 PCF material, 25° surcharge (90% fines, 10% lumps 8” minus) • Incline-max incline angle of 24 degrees • Belt Speed-288 fpm • Superior Idlers-CEMA C, 5" dia. Rolls, sealed for life ball bearings • Load area (main)-20° trough, 16" spacing • Trough-20° on 4' spacing • Returns-Steel return rolls • Self Aligning idlers-Not included • Undercarriage-Hydraulic raise • Top Fold-head section fold up hydraulically -and lowers for transport • Gathering trough -5' long with adjustable rubber flashing Chassis • Construction-Heavy duty wide flange beam • Track Mounted-supported on one pair of hydraulically powered steel tracks • Stabilizer legs-Included with hydraulic raise/lower at tail end of hopper. Must be lowered for operation Conveyor Components Belt Feeder and Discharge Conveyor Superior Pulleys • Drive Pulleys-14” diameter CEMA, 3/8” herringbone lagged drum • Tail Pulleys-12” diameter, Wing type pulley • Shafts-Turned and polished • Bearings-Dodge • Take Ups-Screw type • Belting Belt Feeder -3 ply 5/16 x 1/16, 285 PIW • Belting Dish. Con.-3 ply 1/8 x 1/16, 230 PIW • Belt Splice -factory vulcanized • Belt Scraper-Superior Exterra Primary on discharge conveyor only Additional Specifications • Control Panel-control panel and wiring included. • Local Remote-local teatherd remote with push button controls. • Wireless Remote-Included • Self-Contained-63kw (84 HP) Cat Tier 4 Flex diesel engine supplies hydraulics to power all hydraulic functions. • Throttle control-Manual throttle control level, to adjust engine idle for hi/lo operation • Warning horn-Warning sirens sound prior to engine startup, and during track operation • Guarding-for drive and tail pulleys and return idlers. Guards may not meet all local codes; customer is responsible to have guarding inspected. • Tail Pulley Doors-hinged tail pulley covers on both sides of Belt Feeder and Discharge Conveyor. • Paint-1 coat primer, 1 coat finish enamel: Superior Color Scheme • Idler Paint-powdered coated Superior Orange • Owner’s Manual-(1) copy in English included for operation and maintenance