2020 FSI ST65T

Stump Grinder

2020

FSI

ST65T

Baru

The FSI ST 65 T stump cutter is our biggest 3 points linkage machine for is fast and efficent on large stumps, and is an excellent tool for clearing stumps alignments on road sides. Since stumps are dangerous for the traffic and a nuisance for flail mowers which clean the road sides it is a wise and economical policy to grind them off. The FSI ST 65 T stump cutter has a hydraulic flow regulator which allows the speed control of the movements to cope with the specific conditions of the jobs. The large cutter wheel is driven by the tractor’s PTO shaft to a « T » gear box and a V belt transmission on each side of the gear box to the cutter wheel shaft. All the hydraulic functions of the machine are controlled by a mecanical hydraulic valve block with cable extensions which are long enough to allow an adequat positioning into the tractor’s cabin ,thus giving the operator the most confortable place to work. The FSI ST 65 T stump cutter can be equipped with an electrically controled valve block with a 4 m wire and a magnetic supporting bracket to place in the tractor’s cabin. The FSI ST 65 T stump cutter has an extremely good working range since the cutter head has an extension of 700 mm and the sweeping arc can reach a maximum of 2200 can therefore clear big stumps without having to change the tractor’s position. The FSI ST 65 T stump cutter has our largest cutter wheel with a diameter of 720 mm,this gives the machine an impressive working performance.