2024 ROME TRCH20

2024

ROME

TRCH20

Baru

Hinge Offset Disk Harrow For use with tractors in the 280-304hp range. *Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter. NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation. Width of Cut (ft/in): 14'0" (4.3m), Number of Disks: 20, Weight Per Disk: 729 lbs / 331 kgs, Net Weight: 14,582 lbs / 6,614 kgs. 20” (508mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings. FEATURES: • For deep plowing, plowing in heavy trash, mixing and aerating. • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity. • High gang carrier design to prevent trash build up and clogging. • Adjustable disk blade scrapers. • Equipped with Timken dual tapered roller bearings. • Up to 850lbs (386kg) of weight per disk blade depending on model with an average of 775lbs (352kg). • Up to 13” (330mm) maximum depth of penetration with standard 36” (914mm) diameter disk blades. • Levels, cuts and mixes to full working depth. Standard Equipment: • 36” (914mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades. • Mechanical angling control. • Adjustable disk blade scrapers. • Heat treated alloy steel gang axles. • Heavy duty cast steel spacer spools. • Heavy duty bearing wear plates. • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor. • Drawbar jack stand and safety chain. Optional Equipment: • Cylinder rod stops. • Weight box.