2001 MATEC MAGNUM

2001

MATEC

MAGNUM

18202001-18202002

Bekas

114324

MATEC Filter Press System Filtration Process -The actual filtration process occurs in the filter pack, consisting of a customized set of plates. -The cloths and under-cloths cover the filtrating surface of the plate, which has small projecting cylinders forming drainage channels. -Once the filter pack is completely sealed, the filtration process begins from the head plate with the feed pump injecting the sludge into the filter plates chambers. -The cake will form uniformly all across the filtrating surface and is ready for discharging once the required moisture level has been reached. Magum Filter Presses Qty: 2 Models: MAGNUM FP2000X2000/100 NEWTT HTP MAGNUM FP2000X2000/101 NEWTT HTP System Voltage: 575 V, 60 Hz Length: 14210 mm Width: 3430 mm Foot Wheelbase Length: 12070 mm Foot Wheelbase Width: 1356 mm Total Height: 3795 mm Weight: approx. 57500 kg each Chamber Volume: 115 L Capacity Per Cycle: 11500 L Cu. m/h (2 cycles): 23.00 Ton/h (2 cycles): 42.55 Cu. m/h (3 cycles): 34.50 Ton/h (3 cycles): 63.83 NOTE: The ton/h and cu. m/h data above are calculated on a material specific weight of 1.85 and a 35 mm cake thickness Additional 6 - Stainless steel tanks 1 - Smaller stainless steel tank 2 - Large receiver air tanks (2019) 1 - Bilton insulated tank, large 1 - Bilton insulated tank, small Pumps & actuators All electrical / transformers