2021 VERMEER SC30TX

2021

VERMEER

1,622

SC30TX

1VRC070NHM1004251

Bekas

4251AU

SC30TX STUMP CUTTER The modified operator presence handle design is now manufactured with a harder exterior to improve wear and appearance. This user-friendly handle system provides additional capacitance sensing capability and is intended to help protect the operator. Drivetrain System Relief Pressure 2900 psi (200 bar) Track Width Extended 35 " (88.9 cm) Track Width Retracted 35 " (88.9 cm) High Speed Travel 3.2 mph (5.1 km/h) Ground Bearing Pressure Soft Ground 3.4 psi (23.4 kPa) Track Length On Ground 31.4 " (79.7 cm) Type Of Idler Cast Number Of Idlers 5 Track Drive Pump Type Hydrostatic Pump Flow At Maximum Rpm 11.4 gpm (43.1 L/min) Track Brake Type Hydrostatic Track Type Rubber 7 " (17.8 cm) width Track Drive Motor Type Geroter Operational System Relief Pressure 2750 psi (189.6 bar) Chip Containment 2.2 cu ft (.1 cu m) Flow Control Autosweep (option) Cutterwheel Cut Below Ground 12 in (30.5 cm) Tank Capacity 9 gal (34.1 L) Cutterwheel Cut Above Ground 25 in (63.5 cm) Cutterwheel Straight Line Dimension 35.5 in (90.2 cm) Control Station Description Fixed-rear Reversible Pockets Yes Directional Control Standard Cutterwheel Guard Yes Number Of Pockets 16 Tooth Description Yellow Jacket Cutter System Oil Cooler Yes. Fan-cooled Number Of Teeth 16 System Type Open loop Number Of Indexes 2 Cutterwheel Diameter Without Teeth 16 in (40.6 cm) Cutterwheel Thickness .5 in (1.3 cm) Cutterwheel Speed 1110 rpm Lower Gearbox Hydraulic motor Pump Flow At Maximum Rpm 16 gpm (60.6 L/min) Recommended Oil Type ISO 68 Filtration Method Inline return filter Electrical Battery 405 Controller Yes System Voltage 12 Standard Gauges Hour meter/tach Switches Cutter wheel drive Dimensions Length 94 in (238.8 cm) Width 35 in (88.9 cm) Height 49 in (124.5 cm) Weight Engine Option One 1550 lbs (703.1 kg)

Walk Behind

30.48 cm

1.27 cm

63.5 cm

88.9 cm

238.76 cm

124.46 cm

1,550 kg